win a ball from Bowling.com
Share to Facebook Share to Twitter Email This More...


Author Topic: Angle Extra (Read 4619 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
Angle Extra
on: December 31, 1969, 06:00:00 PM
Ball NPS Score: Not Available
bowling.com has the largest selection of bowling balls
Click here to shop.

The Angle Extra is the strongest and sharpest on the backend of any Angles
in the AMF line. It features the remarkable new cover stock called Veer
(Vector Enhanced Energy Reaction). Veer is a combination of Super-Flex and
AMF's new particle technology which provides greater length and backend
reaction on today's new oil patterns. The Veer cover stock also possesses
the ability to be shined or dulled easily to control the break point on a
variety of conditions. The ball features a 4-density Power Ring core that
has been modified to produce the strongest mass bias of any Angle to date.
This adds explosive mid lane reaction and higher entry angles for better
carry and continuation through the pins.

The specifications are: Core: Power Ring Multi Density; Cover stock: Veer
Particle; RG: 2.52; Flare Potential: 5" (differential .045); Hook: 9.0 BTM;
Length: 5.0 BTM; Finish: 1500 wet sand; Weights: 12, 14-16 lbs.; Color:
Black with Red logo fill.

BeansProShop

  • Hero Member
  • *****
  • Posts: 3144
Re: Angle Extra
Reply #1 on: January 22, 2001, 06:37:02 PM
Well let me tell you. I received a few of these balls 3 weeks ago and did not know what they were.My distributor just told me that he had a few ANGLE EVOLUTION's available at a good price and since I really liked my original Evolution I figured I could sell them. When I unpacked the shipment I found there to be a few of these balls I had never heard of called the EXTRA. Well I can tell you that this ball is AWESOME! Plain and simple. I have a lot of hand and a 5 1/2> 1/8^ axis point. I drilled this ball with the pin 4 3/4" from the PAP under the finger holes with the MAss Bias on the VAL. I was looking for a ball I can play deep inside with that would still recover in the rearend. I found it. This ball eases through the fronts with an unbelievable move at the break point. I used it on our house condition that is pretty wet and it worked great. It cleared the midlane well but really flipped hard at the oil line. I didn't lose any carry though. A few 9's which is expected from that angle of entry. This ball HITS harder than anything I have ever thrown. I mean it and it kept the pins low to boot. The real test came when I used it at another house on their second shift shot. The track is completely fried when we get out there but there is a puddle in the middle that alot of balls just keep fading and you see alot of weak 10's and 7's. I pulled out the EXTRA and BAM!! I had smooth fronts and the ball didn't realy flip on the carrydown but produced a move that just buzzed pins all over the place. We are talking the 5th arrow fade on carrydown here. I had a Black Choas drilled for this condition and it just burned up too quick and hit like fudge so I am really excited about this ball. AMF really has a winner with the new VEER coverstock. The only problem with AMF balls as usual, they aren't very appealing to the eye. This ball is just Black with Red engraving. I would recomend this ball to anybody because it is very versatile to all styles. Beans

Well the day after I posted this review, I shot 300 with the ball on the house condition at my center. I was able to swing 13-15 to about 7-9 at 38-40 ft. and just kill the pocket. Carry was good. Besides the messenger headpin I threw in the 1st frame all 11 other shots were just flush. AMF has the nut here. Do not hesitate to get this ball. You can email me at: bubby856@webtv.net or call my shop at (570)740-6043. Thanks  Beans
Looking for a great place to sell your bowling equipment?? Auction style,Fixed Price and FREE For A Limited Time! Try www.bestintheworldauctions.com and to Purchase The "Secret Sauce" visit www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Pro Shop Own

Paul Meyer

  • Jr. Member
  • **
  • Posts: 61
Re: Angle Extra
Reply #2 on: February 09, 2001, 10:51:37 PM
I must first thank Chris Keller for the seed ball. I drilled mine this past wednesday with the pin below the ring finger (pin placement was 0-1, so CG was basically right there as well) and I placed the Mass Bias in my track directly to the left of my thumb. I polished this ball with Black Magic, since I was looking for more of a skid snap reaction. I first tried this ball on a standard 10-10 shot with some carrydown. This was VERY strong off the dry and even when I got it to my break point a bit farther down the lane it recovered incredibly well and still carried. When I kept it totally in the oil it never made a move, but that is basically what I had expected. The next night I used it on a flatter oil pattern and I felt I had an even better reaction because it recovered when I missed wide right and it was able to move a slight amount when I missed inside.

Compared to my Reactive Angle Evolution this ball totally out finishes it. I also tried my Rock Star and Rock solid. Much strong in the back than any of these balls as well. It has been a while since I have found a big skid flip ball. This ball will be in my bag every night from now on.

Kelly Beasley

  • Jr. Member
  • **
  • Posts: 30
Re: Angle Extra
Reply #3 on: February 27, 2001, 12:02:38 AM
Well the guys at AMF have done it again.  They have came out with one of the best if not THE best cover to weight block matches on the market.  This ball is a very exciting product for the pro shop operators.  This is a ball that can be used by around 80% of the bowling population, and you can't say that about many balls, if you truly understand bowling ball motion and versatility.  In the past few weeks I have drilled these balls for many different styles of bowlers, from guys with very strong hand releases to senior bowlers that want hook on the end but don't throw most solids hard enough to get it down the lane.  



The factory finish on this ball is remarkable (1500).  The reason I make this statement is that many times with different coverstocks when you smooth the surface this much the ball will ping on you, meaning hit very weak, lots of flat tens, and swishing sevens.  From the cover to weight block to surface of this ball it's a winner.  Although we have experimented with different dull and shiny surfaces on this ball it is still a fantastic versatile product.  I also think that the out of box surface is one of the best surfaces for many bowlers to try at first.



As far as drilling this product I haven't seen a layout that I didn't like in this ball.  Let me explain.  Sometimes when you drill different companies balls certain ways they really don't act very good.  For instance, and this is MY opinion only, I don't need any email hate mail (joking). I think if you drill a majority of, not all,  Brunswick products with pins close to the bowlers axis the balls perform very badly, especially on your typical house condition.  There are drastic exceptions of course, but from my perspective these are my conclusions.  But this Angle Evolution Extra I have drilled many many ways already.  From pin 2 inches from axis with MB in track to 6 inches from axis with MB on VAL, and these balls just react great.  They are very predictable and very readable.  Please don't take predictable and readable to mean weak because this just isn't the case.  In a time where some bowling balls are so strong that they actually get unreadable this ball is a great change.  I will also say this in closing, if any of you love the way your ROCK ON reacts, but want just a little more kick on the backend with a dull surface ball, this is the ball for you.  Great job AMF, and thanks for the products your putting out.


Randy Crane

  • Jr. Member
  • **
  • Posts: 19
Re: Angle Extra
Reply #4 on: March 06, 2001, 08:13:02 AM
I bought the Extra and had it drilled with a 4 X 4 pin.  This is a pretty amazing ball.  It performs very well on lanes with head oil and makes a turn coming out.  I had many messanger strikes with it and it carried much better that the HAmmer 4D Reactive that I normally use at this house.

cros843

  • Jr. Member
  • **
  • Posts: 73
Re: Angle Extra
Reply #5 on: March 09, 2001, 05:38:56 PM
unbelievable sums up this ball in one word. ball works very well on synthetic w/ basic leauge shot. rolls up in the oil and doesn't jump off the dry. kept the ball in box finish and still hits crisp enough to carry out the 10. drilled the ball w a 4in pin and power ring between the strong and the val position

Joecr

  • Newbie
  • *
  • Posts: 5
Re: Angle Extra
Reply #6 on: April 08, 2001, 05:58:48 PM
It has been sometime since my review on any ball, but had to do at least on this ball. Drilled 1:30 Layout, Box condition, 2.75 Top Weight, Pin at side and below ring finger, 1/4 negative CG. I`m a low semiroller with 16mph and axis rotation 80-90. I` have to say that this is a very strong ball, recovers very well and as long as you have some head oil is playable from any area. It carries exceptionally well and the over/under I find with other equipments is greately minimized. I have the Tour drilled stronger and in most conditions the Extra seems to be stronger, even in some oil conditions, probably because it gets more angle at the breackpoint. Can play out to the 1-2 board with great confidence as it will rarely if ever skid past to the gutter as others may do. That is telling that it really reads and holds consistantly to its breakpoint. I have used a lot of excellent balls of different marks and find difficult to find any other that may surpass this ball characteristics on most conditions as long as there is some oil. It is not a ball for drier conditions, dont expect it to perform in extra dry, it is an oiler on its finest. I think Tweeners will love this ball.

UNObowler01

  • Full Member
  • ***
  • Posts: 122
Re: Angle Extra
Reply #7 on: October 03, 2001, 01:57:23 PM
The Extra was my first venture into the AMF lineup.  My boss at The Strike Connection drilled one a few months ago and is loving it, and thought I'd like it too.  Well, he was right again.  

My Extra (pin out 2", 3.25 oz top) has the pin set just under the ring finger and cg kicked out about an inch and a half.  Small x-hole just below grip line 6" to the right.  Static weights:  11/16 ounce side and O finger.  Polished right out of the box to add length.

What a ball!  Not a skid-flip reaction by any means, but a really strong arc-roll move that refuses to leave a corner pin.  Easy to adjust with as the track dries up, but not the wisest choice on dry conditions.  More importantly, after two series', my average with it is 222.  That speaks for itself.

A great piece of equipment to have in the bag.  A definite 9+ for Columbia/AMF.  Watch for my review on the Firehawk later this month.
Good luck and good bowling.
J. J. Mastny
Mens Head Coach
University of Nebraska Omaha Bowling
STORM/ROTOGRIP COLLEGIATE PROGRAM 2008-2009

tankantc

  • Jr. Member
  • **
  • Posts: 19
Re: Angle Extra
Reply #8 on: January 20, 2002, 10:52:38 PM
First I throw about 17+ MPH and have about 18 revs on a good day.

I drilled this ball to be the "hook" ball in my arsenal and therefore went witht the Strong drilling for bowlers with high speed.  I had read that this ball would get down the lane very long and recover and I would leave more 9 pins than ten pins.  All I have to say to that is these people must work for AMF!  This ball not only rolls early, but rolls out when I get too deep with it.  This ball box finish hooks only slightly more than my weaker drilled EMB XF.  All in all another dud for me.  I have yet to find a ball on our league shot that I can go inside with and have it recover strong and this one isn't it either!

I would give it a 5, only because it rolls "ok" but carry is just not there.

Greatness

  • Full Member
  • ***
  • Posts: 208
Re: Angle Extra
Reply #9 on: March 06, 2002, 05:57:32 PM
This is the first ball i have thrown that i can say just plain sucks.  Same speed, same release point, same rotation, yet the hook and the break point were all over the map.  No joke, one shot hit the six pin and the next went brooklyn.  It it drilled with cg in the center of the grip and pin out from ring finger about an inch.  Just to check, i pulled out the ultra hot, 258.  The Angle has found its way in to my friends hand for free, i would feel bad asking him for money.

Greatness

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17195
Re: Angle Extra
Reply #10 on: January 08, 2003, 07:10:37 AM
Bought used from a lefty. pin out 2 inches drilled 4 X 4 1/2 no weighthole. Sanded to 1000 and then polished to a good gloss with Black Magic.

This is one of the strongest balls on carrydown ever.

Just saw a regional where the lefties needed backend.  Guy kept wanting to switch to this and he said it was just so much he didn't know if he should do it.

Be very careful this ball can get a lefty a 6 8 so quick or a righty a 4 X 9 .

On many conditions this is way too much for the heads must polish as above.

If it gets thru the heads and doesn't nose ya BIG carry ball.

REgards,

LUckylefty
PS on par with the NuLine Deadly Virus, this may be earlier and a touch stronger.  Very angular break!
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana