win a ball from Bowling.com

Author Topic: Fury  (Read 33614 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
Fury
« on: December 31, 1969, 06:00:00 PM »
The market has been asking for it and you''ve been warned it was coming...........now the new high performance brand from Brunswick is finally here! After three years of development Brunswick proudly introduces FURY.  FURY comes to market with two new technologies High Octane Coverstock and Symmetric Torsion Core Technology.

Coverstock:
High Octane Coverstock is Brunswick’s latest development in Solid Color Coverstock Technology. The Ultimate & Scorchin’ Inferno® balls were the humble predecessors to the new performance standard of FURY.More aggressive than Activator® or ActivatorMAX, High Octane coverstock provides more traction in the oil and is better able to handle the combination of hard synthetic lane surfaces and the carrydown created by today’s high-tech lane oils. Fury is the highest hook potential non-particle ball Brunswick has ever produced and is our best ever combination of high hook potential, great mid-lane recovery combined with strong and continuous back-end reaction.

Core:
The Torsion core is a new core shape concept that involves applying a computerized torsion or twisting process to high-tech shapes. Brunswick testing has shown that the Torsion core should quickly become known for its high hook potential, easy revving and powerful, but controllable breakpoints.  The first Torsion core is a symmetric version that requires no unique drilling techniques. Brunswick has twisted the core on the inside of the ball so you can twist it up more on the lanes. It started with a Fuze®, turned into an Inferno and now comes the Fury......Feel the FURY.

Reaction Characteristics
•Out of the Box: The FURY continues the Brunswick tradition of controlling the mid-lane to create maximum forgiveness and versatility. With its 800-grit wet sand surface, the FURY matches up well on most medium to oily house conditions.
•When dulled: The hooking action will increase and its arc will become more even, creating a better match-up for oily lane conditions and for smoothing over/under reactions seen on wet/dry lane conditions.
•When shined: With either Brunswick’s Factory Finish “High Gloss Polish” or “Rough Buff”, your FURY will go longer in the oil and react stronger to the dry creating a more skid/snap arc. High Gloss Polish creates more length than Rough Buff.
Coverstock
High Octane Reactive
3-color Solid:

Black / Red / Purple
Hardness: 76-77
Factory Finish
800-grit wet sand
More Information
Core Dynamics @ 16#
Two-component
Dynamically
Symmetrical core
RG-max: 2.515  
RG-min: 2.471
RG-diff: 0.044
Average RG: 2.8
Performance
Hook Potential 165
Length 45
Breakpoint Shape 75
Available Weights
12-16 Pounds

 

Corey C

  • Sr. Member
  • ****
  • Posts: 348
Re: Fury
« Reply #16 on: March 08, 2007, 12:26:49 AM »
5.75" pin below fingers with the weight hole 3 3/8" down the VAL. Or drill pattern #3 on the Brunswick video.

I've bowled several games on the US Open pattern the last few days with this ball and it gave me the best look out of all my other balls. I like the solid Octane cover. In OOB finish it is very early at first, but once you get a little oil in the cover it settles down a bit. I am not planning on polishing it because I polished my low pin Total.

I also like the way the ball transitions down the lane with the new core. Like Mika said, it was the only ball that would carry on this pattern. I haven't thrown it on a THS, but unless you have a lot of oil up front it will burn early. The Octane helps the ball get down lane farther than the Inferno's, but it is still a very aggressive ball.

This ball will go with me everywhere!!!
--------------------
Corey Clayton
Brunswick Amateur Staff
Turbo Grips Staff
Team Canada
Check out my arsenal in my profile.
Corey Clayton
Brunswick Regional Staff
Turbo Staff

Bob Hanson

  • Jr. Member
  • **
  • Posts: 95
Re: Fury
« Reply #17 on: March 09, 2007, 11:11:28 AM »
I drilled mine with the pin under the ring finger at 4.5 inches to PAP.  Have not put in a balance hole, but I may after further experimentation.  My early impressions are very similar to Corey's.  Out of the box on a house shot I left 3 straight flat tens as the Fury burned very early when it caught the dry.  However, as the shell polished up and took in some oil, the early burn became less noticeable, and my carry picked up.  I have not been a big fan of the Octane cover, but this ball seems to have a very good core shell matchup, and may be Brunswicks best effort with Octane.  Looking forward to trying the Fury on heavier flatter patterns.

jimc

  • Jr. Member
  • **
  • Posts: 43
Re: Fury
« Reply #18 on: March 09, 2007, 02:18:51 PM »
Only have 6 games with this ball, so I'm not really sure yet.  I gotta say, though it's the first time I've been dissappointed by a Bruswick ball.  I've used them exclusively for the past 15 years.  Drilling is the same as Corey C., what Brunswick terms as "pin down, hole down".  Lot's of 10's as the others have mentioned, but the real problem is over-under.  Doesn't hook as much in the oil as advertised - only 1 -2 boards more that the original inferno, but is too strong off the dry making the ball just about unusable on wet-dry conditions, as my league has been accumstomed to recently.  Perhaps some polish will allow me to stay in the dry.

jimwoosh

  • Jr. Member
  • **
  • Posts: 41
Re: Fury
« Reply #19 on: March 10, 2007, 02:05:40 AM »
stats    19 mph rev rate 450+
drilled mine pin down 4 3/4 from pap. don't have alot of games on this ball but it's because it doesn't match up at all for me. with box finish ball is too strong early with no back end or too much back end if longer pattern..polished it goes way too long with not alot of recover..lots of tenpins with this ball. compared to a newer ball on the market my total nv this ball is about 10 boards weeker for me....very disapointed with this because i really like the total inferno..this actually hooks less then my total. i have used it on 41 foot ths synthetics. pba viper pattern a reverse block, and the 2005 us open pattern..this ball not for me

Corey C

  • Sr. Member
  • ****
  • Posts: 348
Re: Fury
« Reply #20 on: March 11, 2007, 06:24:29 PM »
I was just in Vancouver for a tournament at Excalibur in Surrey. This house is only 5 years old and they have a new Authorty 22 lane machine. With a new surface and heavy oil in the heads, the Fury was the ultimate ball for their THS.

Early in the block I used a 1000 abralon pin under Radical, to tame the snap off the backend. Once the oil carried down the Fury was the perfect ball and carried well. I also tried my low pin Total with 2000 abralon finish and it was earlier and stronger off the dry. The flare rings on the Total are farther apart than the Fury  which also contibuted to the earlier reaction.

I agree with Bob on the reaction after you get a little oil in the cover. The ball reads the lane a lot better and is stronger on the backend. Mine is still OOB and it looks a little shiny now.
--------------------
Corey Clayton
Brunswick Amateur Staff
Turbo Grips Staff
Team Canada
Check out my arsenal in my profile.
Corey Clayton
Brunswick Regional Staff
Turbo Staff

300bowlNY

  • Newbie
  • *
  • Posts: 3
Re: Fury
« Reply #21 on: March 14, 2007, 09:40:03 PM »
I got this ball yesterday...this is my first review. My stats are 204 avg. right handed, tweener, ball speed 17 - 18 mph. The ball is 15 lb, drilled pin next to my middle finger ( i have a low track) cg is 4.5 inches from pin straight down from outter egde of ring finger. 0
                                                00
                                                  x
                                                 o
The lanes I bowl on are Brunswick synthetics with heavy oil. We are the 1st league of the night so we get the fresh oil.
I was not thrilled with this ball and I think I wasted 200 bucks. I have never left more solid 10's and 7's in all my life of bowling. Shot after shot was hitting the pocket but NO carry. I moved my feet, moved the ball all around for different angle and nothing but 10 after 10. The ball did move real nice in the oil, but went longer than I thought it would. It was in OOB condition. The other balls that I use are Columbia action, Ebonite Big Time, Hammer Vicious Strike << my favorite. All of these balls hit harder than the fury. I also have two 300 games one with the vicious strike and one with the action. I'll adjust the surface with a scrotch brite pad and use it again next week. As for my scores  194, 190, 178...if I could have stuck everytime I left a 10 or a 7 I would have been in the 740's.

300bowlNY

  • Newbie
  • *
  • Posts: 3
Re: Fury
« Reply #22 on: March 17, 2007, 09:14:25 AM »
I got to use the "fury" again on a practice session at a different house just to see the ball reaction. The conditions are synthetic with pretty light oil.
The "fury" still stunk. There was not enough oil in this house for the ball in ood condition. So in 1 house these to much oil and in another not enough oil. The ball reached about 40 feet then rolled out and died on the back end. It didnt hit hard on either of the 2 lane conditions that I used it on. I never had a ball that was so "lane senitive" as the "fury". For this weeks league on the heavy oil I am taking the cover down to 500 and I'll post another review. As for now this ball is terrible.

handmeDN

  • Sr. Member
  • ****
  • Posts: 290
Re: Fury
« Reply #23 on: March 21, 2007, 09:19:18 AM »
I bought this ball from the INVERTED1/DEADFLUSH, replaced thumb slug and redrilled for my thumb. I'm a LANE#1 fan and am doing a ball comparison between the FURY and the G-Force, when it arrives, look for my other post and have a good day! handmeDN

BALL SPECS
Pin Length - 3"
Starting Top Weight - 2oz
Ball Weight - #16.1oz


DRILL PATTERN - PIN above bridge between fingers (inserts)
Pin to PAP - 5"
CG to PAP - 4"
X Hole (if needed) - Flare Increasing X-Hole = 2 1/4" beyond PIN/PAP
MB Location - N/A


BOWLER STYLE - R/H
Rev Rate - 300 - 400 rpms
Ball Speed - 15 - 17 mph
PAP/Track - N/A


PICTURE AND VIDEO LINKS




SURFACE PREPARATION
Grit - 450 abralon
Type (Matte, Polish, Sanded) - Light polish w/ ruff buff


LANE CONDITION - Synthetic
Length - 30' House Shot
Volume - lite
Type (Wall, Xmas Tree, Sport) - Sport


BALL REACTION
Length - 40'
Back End - Strong
Overall Hook - moderate to strong
Midlane Read - great
Breakpoint Shape - Hocky Puck


COMMENTS

Carry - Explodes on pocket hits, light carry makes (pins dance), high pockets sometimes leave the 4-7 combo

Likes - Ball reads the lane conditions, as long as you keep the same release and hit your mark. The ball seems to like CLEAN backends otherwise you need to play more of a straight down and in on OIL conditions.

Dislikes - Heavy oil and DRY boards, seem to make this ball over/under react. Oil W/carrydown conditions make this ball go really long and steady arc 5'-8' from PINs. Dry you need to give it some room.

Conclusion - First game (high Polished) was on Wood lanes dry fronts and carrydown, shot 173. Then dulled it up alittle shot 3 game set on League, synthetics. Started out 12 board swing to 8, shot 211. I moved inside as the lanes started to dry up quick Now @ 15 swing to 10, shot 243. Last game lanes went totally dry fist two frames hung splits, moved to 25 to 20 w/nice and easy release. If you threw it too hard it would skid more, left two 10 PINS all night, OH! shot 208 last game. I would say this ball is ideal for synthetics. I'm gonna polish it High Gloss for starts next week and if needed buff it to make it aggressive. I believe that this balls success is due to not only the PROVEN Diamond CORE type design, but the coverstock technology for todays ever changing lane surface/oil viscosity type conditions. Coverstock is very adjustable.handmeDN

BrunsWolf

  • Hero Member
  • *****
  • Posts: 588
Re: Fury
« Reply #24 on: March 21, 2007, 11:04:29 AM »
Let me start by congratulating the BIG B on yet another fine product.

Ball stats:
Pin: 3"
Drill: Pin down 4.5" from PAP, CG at 50*, x-hole 2.25" down VAL (1" hole)
Weight: 15

Bowler stats:
Rev rate: 350
Speed: 17
Tilt: very low

House #1:
lanes: wood with 22' guardian
pattern: viper and scorpion

Viper: able to use Fury on the Viper due to the continution caused by the drill. even with fresh backends, there is no snap in the breakpoint whatsoever. played a laydown of 27 out to 7 at the breakpoint (around 42 ft.). ball was VERY smooth and carried everything (that wasn't a 9 pin). i've moved that far inside with other equipment and left tons of flat 10s, but this ball just hits!! every game, i moved an average of 2 boards inside and i never saw a difference in carry (except more 9 pins). although a "roll monster/hook-in-a-box", it was/is the ball of choice for the Viper. avg. 203

Scorpion: the increased amount of oil downlane caused a tighter line. i played with 16 as a laydown out to 9/10 at the breakpoint. the low RG and the drilling allowed the ball to get into a roll early enough to finish(something my Scorchin couldn't do). with the breakdown, i made parralell (sp?) moves inside (i was the farthest inside on my pair so i would have fresh oil). the ball still carried everything. slight user error and missed spares caused a 197 avg.

House #2:
Lanes: AMF synthetic
Pattern: 42' house

this house shot has a lot of over/under. to compensate, i kept my hand behind the ball and played fairly deep. i started at a laydown of 28 out to 8 BP. the continuous reaction helped calm the over/under and if tugged into the oil, the ball would hold line, finish, and carry. if pushed outside, the ball would scream back and just shread the rack (save for the 9 pins). carry has always been a problem in this out due to heavier pins. i was able to avg. 218 for the 6 games.

Conclusion;
no matter the pattern and angle, this ball hits as long as you feed it some oil. the carry is like nothing i've seen before. everytime i throw it, its like i tossed a frag instead. thats how hard it hits! it carries from every angle and leaves more 9 pins than i could ever imagine. this ball is not just the hook monster that it is portrayed to be, but a roll monster. it is definitly a piece to have in your arsenal. the even arc make it perfect for tearing tougher shots a new one! sport shots beware!
--------------------
Today:......was it you?........or was it the Laneman?

Unoffical Youth Brunswick Staffer
Yea, I'm a crown bearer. Why aren't you???

Jared Wolf
Jonesboro, AR
Check out my stats in my profile or go to: http://members.bowl.com/FindAMember/memberView.aspx?mp=5437&ms=235&s=2005-2006

http://brunswick802.bowlspace.com/
Jared Wolf
Jonesboro, AR
Brunswick Advisory Staff

The opinions expressed are solely those of the writer and not of Brunswick Corporation.

olererack

  • Jr. Member
  • **
  • Posts: 71
Re: Fury
« Reply #25 on: March 21, 2007, 11:44:12 PM »
Brunswick has become known for its high hook potential, easy revving and powerful, but controllable breakpoints. The first Torsion core is a symmetric version  requires no unique drilling
ball was VERY smooth and carried everything I’ve moved that far inside with other
The FURY continues the Brunswick tradition of controlling the mid-lane to create maximum forgiveness and versatility. With its 800-grit wet sand surface,
The FURY matches up well on most  conditions. Medium to oily
The weight block really enables the Fury to get through the front part of the lane and rev up in the mid lane with plenty of energy for the backend.
When shined the FURY will go longer in the oil and react stronger to the dry creating a more skid/snap arc.
High Gloss Polish creates more length than Rough Buff.
The finish is phenomenal and it is very, very consistent at the breakpoint. It crushes the pins and it craves the oil.



NateNice

  • Hero Member
  • *****
  • Posts: 649
Re: Fury
« Reply #26 on: March 24, 2007, 06:04:56 PM »
First review here.

I put medium revs on a ball and roll it around 16-17 MPH.  I go for an axis rotation of about 40-45 degrees or so.  If I'm off I'm usually close to 35 degrees.  Rare I go about 50 degrees.  What I'm saying is if I'm off I'm more likely to have forward roll than side roll.  I have my Fury drilled about like Brunswick pattern 1E suggests.

So that's pin right of the ring finger, CG below that to the right of the center grip and the PAP about 3 3/8" out.  There is no X hole in this ball.  I wanted my Fury to start picking up in the midlane and then come big in the backend.

The ball was throw in practice at an AMF house on a Saturday afternoon.  Definitely THS and it was average, medium oil.  A very typical house shot.  Coverstock is out of box.

First thing I noticed is this ball hits hard.  From any angle it really unloads on the pins.  Second thing I noticed is this ball likes oil.

It gets through the heads real nice and starts grabbing midlane some.  But it reads it very well.  You think it's going to start moving too soon and lose its energy and cross over but it doesn't.  Like the hook picture shows, it gains its composure in the midlane and then when it hits the backend, look out!

It's especially forgiving if you miss your breakpoint some outside.  Being that it's a THS it'll find its feet and grab the lane and make an angle for the pocket and really smash 'em.  Inside misses on the breakpoint generally fair well to but are more prone to leaving 10 pins I've found.  Shots right on your breakpoint don't give the pins a chance, obviously.

I usually throw a Vapor Zone on a THS like this that has some (not a lot) Rough Buff polish on it.  The VZ is more than enough ball for these types of conditions.  The fury allows me to play inside about 4 or 5 more boards I found.  So on the nights when the lanes are a little more fresh, I'll be able to bust out my Fury for a game or so and then move to my VZ.  I'll probably end up throwing some more polish on the VZ do really get that backend snap.

That, to me, was the main difference in these 2 balls.  The Fury started to make a move in the midlane some, but didn't lose power some how.  The VZ skids through the midlane and then darts for the pocket in the backend almost exclusively.  So it's easy to see why the Fury is an ideal heavy oil ball.  It's not going to be squirty and will recover and be able to move with minimal backend as it readies itself in the midlane.

On a THS this ball gives a lot of area to play with.  It allows you to play deeper by about 4 or 5 boards compared to a VZ (Activator+) with a little polish.  I'm going to probably polish my VZ more now to create a little more space between these balls.  I mean, there's definitely space to be sure, But I usually only bring 2 balls and a spare ball so I like a gap between by balls.

Interestingly, I was able to play from the same spot with the Fury as I could my VZ.  But by playing deeper it got back to the pocket just as well and at a bigger angle.  So the choice was obvious.

Kind of a rambling review.  But the point is clear.  The Fury is a hell of a ball that will keep up with oily lane conditions with small backends.  It's also veristle enough to play on a medium oil house shot if you're willing to play a little deeper.  You get a big angle this way.  If you can control you'll score big.

The Fury is forgiving (as are a lot of balls under these conditions) and I was impressed with the different spots I could play.  Not once did this ball quit on me.  It just doesn't roll out and it keeps coming and coming.  It hits really hard as evidenced by some rather poor shots that ended up in strikes when a split would have been more likely.  

It rolls hard and has a lot left on the back end.  It doesn't seem right to use this ball on a house shot.  It's almost too easy.  I'm waiting to try it on a tougher condition.

In 4 games I shot very well.  Well above my average in the first 3.  The last game was an experimentation game mainly and a comparison game.  


tylerbehnke4

  • Newbie
  • *
  • Posts: 1
Re: Fury
« Reply #27 on: March 28, 2007, 10:10:59 PM »
I tend to throw a slow ball with maybe 8 to 10 revs on it. This ball is drilled to go long and snap hard on the back end. The pin is just to the right of my ring finger and up just under a half inch. If you throw a similar ball to mine anywhere around the ten board will come back charging and will carry. I have never seen a ball hit as hard as this one. It finishes so hard it makes it look as if I throw a fast ball. When thrown right when it hits it is one heck of an explosion.

santonio

  • Newbie
  • *
  • Posts: 1
Re: Fury
« Reply #28 on: March 29, 2007, 01:43:20 AM »
Just drilled a Brunswick Fury last week. I was considering Hammer No Mercy and Black Widow but in the end i got the Fury. 1st thing i have to say, its GOOD!~ The hitting power is great, once u hit the pocket, there is only 5% that it can't strike! The hooking is also good. A very good ball for medium to oily lanes. I have a BVP Rampage and after throwing the Fury, realise that Rampage was very easy to control. If played with this 2 balls together, sure to get loads of high games. For those considering this ball, don't worry, highly recommended! Sure to raise your average! Sure that you will like it! Sure you won't regret it! Brunswick created another winner!~

IRIE_63

  • Newbie
  • *
  • Posts: 2
Re: Fury
« Reply #29 on: March 29, 2007, 12:19:26 PM »
Note: This applies to the house condition of the Bowling Lanes in my area.

When this ball hits pocket, or Brooklyn... it washes out ALL the pins. Strike every time. Getting it to hit pocket consistantly... a challenge. If I throw the exact same shot after a strike, the ball sometimes reads the lanes different. This may be because there is too much read on the mid-lane. Pin is to the right of my ring finger.

Will try to wetsand down w/ 1200 abralon and see if getting more lane will help. Will follow up with a review shortly after.

By the way... with other balls, its easy to adjust to use for a spare. This ball being unpredictable... caused me a few chops. When using this ball, I'll stick with Polyester for spares.

-IRIE

Big-T

  • Jr. Member
  • **
  • Posts: 38
Re: Fury
« Reply #30 on: March 29, 2007, 01:16:53 PM »
Drilled pin straight out from ring finger.  Weight hole.

My typical house shot is medium and for while there's oil this ball is wonderful.  Very forgiving with hardly any over/under reactions (again as long as there's some oil).  I carry a 201 average at my home field.  My first game with this ball Tuesday was 265.  After that the lanes were dried up and I had to put it up.  Hated it because it was fun to roll.

I'm a medium speed with medium revs.  The ball is very readable and has a nice, but strong, arc.  It's also easy to tell when it's time to put it up....I like that "built in" feature.

I did test throw it a week ago after league and there was alot of carry down.  The Fury handled it fairly well.  Can't wait to get it on an oilier patter.  I don't miss my Mean Machine (died out after 2 months) one bit.

I got mines.......better get yo's!