win a ball from Bowling.com

Author Topic: Vintage LT-48  (Read 28305 times)

Ballreviews

  • Administrator
  • Hero Member
  • *****
  • Posts: 543
Vintage LT-48
« on: January 13, 2014, 09:58:24 AM »
Ball NPS Score: 100.00
Brunswick Vintage LT-48 Ball Specs:
- Color: Black Solid All colors do vary somewhat from the picture shown.
- Core: LT-48 Medium RG Symmetric
- Coverstock: 3C Solid Reactive
- Factory Finish: 500 Siaair Micro Pad, Royal Compound, Royal Shine
- Reaction: length with entry angle
- Radius of Gyration (RG): 2.603**
- Differential (Diff): 0.038**
- ** RG and Diff are based off of 15 lb. balls
- Hook Potential: 120 (scale: 10-225)
- Length: 190 (scale: 25-235)
- Breakpoint Shape: Angular
- Recommended Lane Condition: Medium-Oily
- A few tiny pit holes in the cover stock of the ball are normal

 

batbowler

  • Hero Member
  • *****
  • Posts: 1860
Re: Vintage LT-48
« Reply #1 on: February 11, 2014, 09:57:39 AM »
BALL SPECS

Pin Length:2-3

Starting Top Weight:2.75

Ball Weight:14lb 6oz


DRILL PATTERN
45deg X 3-1/2 X 75deg
Pin to PAP:3-1/2

CG to PAP:2-1/2

X Hole (if there is one):P3


BOWLER STYLE

Rev Rate:300

Ball Speed:16

PAP/Track:4-3/16" right X 13/16" up


SURFACE PREP

Grit:2000 abralon just to knock some shine off

Type: (Matte, Polish, Sanded):slight polish


LANE CONDITION

Length:41'

Volume:23ml

Type (THS, Sport Pattern etc):Modified Stone Street


BALL REACTION

Length:Easy length

Back End:strong

Overall Hook:

Midlane Read:

Breakpoint Shape:very strong arc to angular


COMMENTS
I didn't know what this new ball would produce. I went with my normal pin below ring finger with cg kicked right with low weight hole. I was surprised with the easy length through the heads and very strong move at the break point. It reminds me a lot like a slightly milder Versa-Max, both were clean with easy length and that strong move when it came out of the oil pattern. I was pleasantly surprised to say the least and I did hit the surface lightly with a 2000 pad to just knock some shine off. The hit and carry of this ball is amazing and I can see this being my new benchmark ball. Great job to the people at Brunswick!
Likes: Love the solid black and it's reminds me of the Versa-Max, which was another great ball.

Dislikes:None so far, except I only have one!!


PICTURES AND/OR VIDEOS
Bruce Campbell
Coaches aren't born, they are made!
USBC Silver Certified Coach
          
www.rotogrip.com
www.stormbowling.com
www.radicalbowling.com
www.damngoodbowling.com

Changing bowling, one bowler at a time!

Cocoa9781

  • Newbie
  • *
  • Posts: 4
Re: Vintage LT-48
« Reply #2 on: February 11, 2014, 11:56:25 PM »
I just drilled up the LT-48 let's me start by saying nowni know why Johnny was so damn good back in the back. This ball I used on a typical house shot. Talk about clean through the heads I honestly don't think this ball even knows what the heads looks like it blows right through them. As for the back end on this ball...WOW!!! Amazing just a smooth arching reaction. Even with getting it inside this ball held and I sent a couple outside and it hit just as hard. This is a all around sleeper of a ball. I have this ball drilled pin up over the bridge CG kicked out and a low weight hole which is my favorite drilling, I would recommend you putting your favorite drilling on this ball as you will really be impressed with it's versatility. Don't be surprised if you order a case and save a few because it's that damn good. ENJOY

fatman_FUBAR

  • Sr. Member
  • ****
  • Posts: 326
Re: Vintage LT-48
« Reply #3 on: February 14, 2014, 08:12:23 AM »
Brunwisck Johnny Petraglia Lt-48 VINTAGE

BALL SPECS
Pin Length - 2-3"
Starting Top Weight – 3.1 oz
Ball Weight - 15lb 4oz

DRILL PATTERN
Drilled at 5” x 4”

BOWLER STYLE
Rev Rate - 400  / 350 / 300 / 250
Ball Speed - 19mph / 16mph


PICTURE AND VIDEO LINKS

SURFACE PREPARATION
Grit - Out of the Box
Type (Matte, Polish, Sanded) - Out of the Box

LANE CONDITION
Length - 41 ft
Volume – 18.30 ml
Type (Wall, Xmas Tree, Sport) – Kegel Main Street (THS)

Dont forget to follow us on Facebook @ http://Http://www.Facebook.com/LaneSideReviews

UpstateProShopChris

  • Sr. Member
  • ****
  • Posts: 372
Re: Vintage LT-48
« Reply #4 on: February 18, 2014, 06:55:49 PM »

BALL SPECS


Pin Length: 3


Starting Top Weight: 3.2 oz


Ball Weight: 15 lbs 2 oz



DRILL PATTERN


Ball: 45 x 4 3/4 x 70


X Hole (if there is one): Small P3 hole down the VAL toward the thumb



BOWLER STYLE


Rev Rate: 375 rpms


Ball Speed:17.5 mph



PAP/Track: 4 3/4 over 3/4 up



SURFACE PREP


Grit: High gloss polish


Type: (Matte, Polish, Sanded): Polished



LANE CONDITIONS


Lengths of patterns: 41 foot house



Volumes:  moderate to lower



Type: house




BALL REACTION


Length: Clean through the heads with slight read of midlane



Back End: late but strong arc


Overall Hook: on the mild side of moderate


Midlane Read: none


Breakpoint Shape: strong arc



COMMENTS


Likes: Easy length down lane even after encountering friction and great recovery when moving inside



Dislikes: none


The Johnny Petraglia LT-48 remake is a real tribute to the game of Mr. Petraglia himself.  It is long, smooth, and it strikes a lot!  I wanted my LT-48 to be a smoother shape so I chose a layout with a larger angle sum to take advantage of the balls intended reaction.  This ball has been exactly what I imagined it to be and comes into play once my Melees are too strong.  It is about 3 and 1 weaker than my shinier pin up Melee and very similar to my Ringer.  The similarities end there as the Ringer is much more angular than the New Vintage LT-48.  The Petraglia gets such easy length that I don't have to push it down the lane and I can get back to my roots as a slow hook guy.  Typically with smoother weaker balls I am not able to get inside and open up my angles as much.  The LT-48 is the exception to this rule and recovers really well when being thrown away from the pocket.  It flat out crushed the 10 pin out!  The drier the lanes get the more boards you can cover.  I never had to worry about this one quitting.  If you are looking for great length with a smooth but strong backend reaction check out the New Vintage Johnny Petraglia Lt-48.
Chris Garrett
Upstate Pro Shop
Greenville, SC  864-248-4737
Upstateproshop@charter.net

Brunswick Regional Staff
Vise Regional Staff

FranVarin

  • Sr. Member
  • ****
  • Posts: 345
Re: Vintage LT-48
« Reply #5 on: March 02, 2014, 09:10:12 PM »
LANE CONDITION

Length: Broken down Kegel Beaten Path & Fresh House shot

Volume:

Type (THS, Sport Pattern etc): THS


COMMENTS

Brunswick has a great idea with the Vintage line. For those who can remember the legendary LT-48, it was the ball all others were compared to in the 70’s bearing the name of one of the greatest ever. This release preserves the shape from days gone by. It is very clean and long with a smooth and continuous move on the back end. For comparison purposes think in terms of a slightly weaker version of the C-System Versa Max in terms of shape on the lane. I’ve used this ball on broken down Kegel Beaten Path on old high friction THS surface. It got through the burn in the mids and was able to store energy sufficient for it to move on the back end. You can certainly use this ball on a fresh house shot if you need to smooth out the over/under. If you crack the cover on this ball it will be a little earlier and more even front to back. Brunswick has created a very usable and versatile piece here. It may not be “flashy” on the lane but, it is more than capable in getting the job done. It’s classic black color is cool since the ball just seems to glide down the lane. 


PICTURES AND/OR VIDEOS
Fran Varin
USBC Silver

BallReviews-Removed0385

  • Newbie
  • *
  • Posts: 0
Re: Vintage LT-48
« Reply #6 on: March 06, 2014, 01:47:12 PM »
LANE CONDITION

Length: 39 ft.

Volume:  Heavy from 10 to 10

Type (THS, Sport Pattern etc): THS


COMMENTS
Layout: Pin roughly 4" from PAP and below the fingers.

Likes: At first I thought this ball was too weak, except for the dry lanes.  After putting 5-6 games on it to burn a little gloss off, I was very wrong!  It became a very nice arc reaction that was still clean through the front half of the lane.  I still use it fairly close to friction, and absolutely love the way it reads what's there.

Dislikes: None whatsoever! 


PICTURES AND/OR VIDEOS

SjuStorm

  • Jr. Member
  • **
  • Posts: 18
Re: Vintage LT-48
« Reply #7 on: March 07, 2014, 10:30:05 AM »
Ball Reviewing: LT 48
Ball Surface:  OOB
Layout used:  75x5x65 same as Melee
Oil Pattern:  House Shot

How did the ball roll & react:  My LT 48 rolled extremely even and had a really nice smooth arc to it.  It’s very versatile where I can play straighter angles and also move in if I have to.  After a couple weeks throwing it, I wanted to see what it would do with a little surface to it.  I just scuffed it up by hand with a 2000 pad and it made the ball even better.  More control in the mids and backend.

Did you compare this ball to another ball? If so which one:  If I were to compare this ball to others, I would say it’s a perfect mixture of the Versa Max and Melee.  It has the midlane control of the Versa and the backend motion of the Melee.  Cleaner than the Melee and a bit more pop in the backend.

Strengths & weakness’s of the ball:  The strength is the versatility and control it has.  Can play straight angles and open up the lane as well.  For some it might be too clean, but knocking the shine off a little turns the LT into a monster
Brunswick Regional Staff

***The opinions expressed are solely those of the writer and not of Brunswick Corporation.

Brunswick_fan_BrandonH

  • Hero Member
  • *****
  • Posts: 786
Re: Vintage LT-48
« Reply #8 on: March 10, 2014, 11:24:28 AM »
BALL SPECS

Ball Weight: 16 lbs


DRILL PATTERN

Dual Angle Layout: 50 x 3" x 50

X Hole (if there is one): P3


BOWLER STYLE

Rev Rate: Higher, between 370 and 410 rpm, aka Cranker

Ball Speed: 16.50 mph

PAP/Track: 5 3/8" over and 7/8" up with a high track

SURFACE PREP

Grit: Box - 500, Royal Compound, Royal Shine

Type: (Matte, Polish, Sanded): Polished


LANE CONDITION

Length: Multiple

Volume: Medium to Light

Type (THS, Sport Pattern etc): THS & Sport


BALL REACTION

Length: 7 / 10

Back End: 7 / 10

Overall Hook: 7 / 10

Midlane Read: 7 / 10

Breakpoint Shape: 7 / 10 ( Smooth Arc)


COMMENTS

Likes: Easy Length and Smooth Transition at breakpoint

Dislikes: None

The LT-48 is a remake of the original by name only. This ball has the newest technological advances of core and coverstock. The core of this ball is big and creates an even rolling arc type of motion. The cover is a lower friction solid black that has just enough hook. This ball is good for medium to lighter oil conditions. The LT-48 would be a good option when the Melee or Strike King is hooking too much and you need a ball to play straighter through the fronts. I drilled mine with a 3" Pin to Pap to allow me to play further right and it works perfectly even with my higher rev rate. I bowl in a late league on wood lanes, and I am able to play about 4 boards further right than a strike king, but still have enough motion on the back to knock all 10 down. With the solid coverstock, it is less angular when reaching the friction. If the lanes really break down in a tournament, I can use my LT-48 in order to stay closer to the friction and not have to open up my angles.
« Last Edit: March 12, 2014, 09:24:44 AM by Brunswick_fan_BrandonH »
Vise Staff Member

tommymo

  • Hero Member
  • *****
  • Posts: 821
Re: Vintage LT-48
« Reply #9 on: April 06, 2014, 09:42:03 PM »
BALL SPECS

Pin Length: 3.5"

Starting Top Weight: 2.10oz.

Ball Weight:15lb 4oz


DRILL PATTERN

55x5x25

X Hole (if there is one): none


BOWLER STYLE

Hand: Left

Rev Rate:325

Ball Speed: 18mph @ release

PAP: 4 1/2 x 0

Rotation: 40*

Tilt: 10*

SURFACE PREP

Ball was thrown at:
- Factory Finish: 500 Siaair Micro Pad, Royal Compound, Royal Shine
- 2000 SIAAR pad



LANE CONDITION

Length:43'

Volume:23.75ml

Type (THS, Sport Pattern etc): Asymmetrical THS

Wood Lanes


BALL REACTION

Length: 7 (scale 1-10)

Back End:  6 (scale 1-10)

Overall Hook: 6 (scale 1-10)

Midlane Read: Later

Breakpoint Shape: Angular

COMMENTS
I have used the new Vintage LT-48 over the past 8 weeks. I started using this ball at the factory finish. On the fresh the ball was a little over/under so I had to make sure I kept my angles straighter and my speed slower.  As the night went on, I was able to move in and start to open up the lane more.  I decided to sand the ball with a 2k SIAAR pad to smooth out the over/under.  After the surface change, I was still able to get great, easy, length through the heads while giving me a more suitable down lane reaction. The Vintage LT-48 would be a great ball for seniors or bowlers with lower ball speed looking to control the motion at the break point.  The solid cover still gets great length while offering a good amount of predictability and control at the break point that many of the balls on the market can't match. Being a pro shop operator that mainly sells Storm and Roto Grip equipment . . . I can honestly say that this release a long with a few others, has opened my eyes to Brunswick's product line. Being in an old wood center, this ball will be my first recommendation for any bowler looking to fill a void in their Med-light oil ball slot.
Tom M.

BeansProShop

  • Hero Member
  • *****
  • Posts: 3144
Re: Vintage LT-48
« Reply #10 on: January 11, 2015, 08:33:33 PM »
BALL SPECS

Pin Length: 3.5 Inches

Starting Top Weight:3.00 oz

Ball Weight:13 lbs (Rehabbing Injury)


DRILL PATTERN

Dual Angle:75 x 5 x 45

X Hole (if there is one):Small hole 3" deep 5 inches straight across on the Midline


BOWLER STYLE

Rev Rate:400+

Ball Speed:17-18 Avg

PAP/Track:4 5/8> 3/4^


SURFACE PREP

Grit:Out of Box (500, Royal Compound, Royal Shine)

Type: (Matte, Polish, Sanded):Polished

LANE CONDITION

Length:43ft on old wood

Volume:High Volume on High Friction

Type (THS, Sport Pattern etc):THS


BALL REACTION

Length:9 out of 10

Back End:9 out of 10

Overall Hook:6 out of 10

Midlane Read:7 out of 10

Breakpoint Shape:10 out of 10


COMMENTS

Likes:With throwing 13lb balls I get a true feel of how good the coverstocks truly are. 13lb Symmetricals have the same core shape as the Danger Zones and roll really good. I have to say....this release really took me by surprise. The fast revving core and easy length provided me with a reaction I haven't seen out of a shiny solid since the Versa Max was discontinued. Black is the color of choice for me as the ball just doesn't ever look erratic. That smooth look is total money. This ball has been the biggest surprise of the 2014 year. If you don't have one of these, you need to get one before they're gone!!

Dislikes:Nothing and the fact it wont be around forever!


Looking for a great place to sell your bowling equipment?? Auction style,Fixed Price and FREE For A Limited Time! Try www.bestintheworldauctions.com and to Purchase The "Secret Sauce" visit www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Pro Shop Own

Andyman3333

  • Full Member
  • ***
  • Posts: 197
Re: Vintage LT-48
« Reply #11 on: January 12, 2015, 01:00:41 PM »
Layout 5 ½ pin (80 degree VAL)

I’m a heavy roller with about a 350 rev rate.  Don’t have much axis tilt, don’t get around the ball much and struggle lots of times to get a ball to retain energy and corner at the pins. 

The LT48 probably unintentionally reminded me of the C-System Versa Max.  The easy comparison because the Versa Max will ultimately be one of my favorite balls of all time and it’s black.  I do have a thing for black bowling balls as I’ve said in previous reviews. 
The LT48 was a little too clean on the lane for me.  But I hit it with 4000 just to take the shine off and saw better reaction off the dry.  Got the ball into a roll and drove through the pins well.

The ball is best for medium to dry lanes.  I had no problems playing square up the boards on a league shot as well as from the inside as the lanes transitioned.  I look forward to the next Vintage release from Brunswick coming this year.  They have really made some incredible pieces over the last few years and have a complete arsenal to fit all styles of player. 

supercak

  • Newbie
  • *
  • Posts: 2
Re: Vintage LT-48
« Reply #12 on: January 18, 2015, 09:39:06 AM »
broken down house shots and shorter sport patterns

I was looking for a ball to replace my over used versa-max when i read the specs and reviews on the LT-48. I drilled the LT-48 very similar to the versa-max with a pin down right under the fingers. I found that it clears the heads very easily and has predictable and controlled backends. Not quite as strong as the versa-max but a very good replacement for it. overall i am very pleased and happy with the LT-48. It is always in my bag!

animationbowler

  • Jr. Member
  • **
  • Posts: 18
Re: Vintage LT-48
« Reply #13 on: January 31, 2015, 08:41:18 PM »
LANE CONDITION

Length:43 feet

Volume: 24.4mL

Type (THS, Sport Pattern etc):2014 USBC Open Championships Pattern


COMMENTS

Likes:Ball is very versatile. Able to allow me to use my speed to my advantage when the pattern opens up, and still able to drive through the pocket.

Dislikes:None

DV8 Advisory Staff Member

The opinions expressed are solely those of the writer and not of Brunswick Corporation.

scrub49

  • Sr. Member
  • ****
  • Posts: 407
Re: Vintage LT-48
« Reply #14 on: May 22, 2015, 08:01:18 AM »
LANE CONDITION

Length:

Volume:

Type (THS, Sport Pattern etc)


COMMENTS

Likes:Like the length, love the color it seems to hit harder than my Strike King but not as strong on the back-end going to change the cover to 2000 and see if it becomes more versatile when it comes off the pattern.

Dislikes:None yet really haven't given the ball a chance yet just 3 game bowled with it.


PICTURES AND/OR VIDEOS