win a ball from Bowling.com

Author Topic: Element Au79  (Read 14489 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
Element Au79
« on: December 31, 1969, 06:00:00 PM »
Ball NPS Score: Not Available
Experience the power of Dyno-thane's SoakerTM resin. Building on the Tour proven success of the original is not an easy task. The new Element Au79TM has the perfect blend of Solid and Pearl Soaker ResinTM to deliver a strong midlane roll and a big backend reaction.

No need for smoke and mirrors, this ball flat-out performs. Don't look for the magic spots, it's unnecessary. Like its predecessor, the Element Au79's core is symmetrical. This translates to a ball that's easy to drill and even easier to rack up the big scores.

Lane Condition Recommendations
Medium to Heavy oil with carry down.

Other Details

Length: 17 out of 20
Backend: 22 out of 25
Coverstock: Pearl and Solid Soaker Resin Blend
Weight Block: Dynamic FBT
Colors: Red/Gold Pearl
D-Scale: 76-78
Weights: 12-16 lbs (the same core used in all weights)


 

v02maxlefty

  • Full Member
  • ***
  • Posts: 158
Re: Element Au79
« Reply #1 on: May 10, 2004, 11:32:37 AM »
Picked up this baby from Buddies 16lbs 3.5" pin 3.3oz top weight.  Pin under ring finger and CG just slightly kicked outside the palm area.  Actually got this to use on an up coming sport condition league, but tried it out on a house shot the day I got it drilled.  Super clean through the heads with a ton of back side.  Had to move much deeper than normal because of the condition I was testing it on.  The one thing that I did notice was the sound it makes when you hit a flush shot.  Sounds like you got all the meat of the bat on the ball when you hit a 500 ft home run, only times 10.  Unreal!  This one is a keeper and must have in any bag.  Great job Dyno-Thane!  Will post another review after testing it on a sport condition.

BowlPro

  • Jr. Member
  • **
  • Posts: 91
Re: Element Au79
« Reply #2 on: May 10, 2004, 02:14:23 PM »
Dyno-Thane Knows what the Bowlers Need!

The New ELEMENT-Au79 arrived three weeks ago, and I have been on the lanes giving it a good work out just about everyday since. Let me give you some specific information that can help you judge this ball for yourself.

I drilled this ball what we call "Label Leverage" 4" X 4" with a small balance hole at 5" from the grip center threw the CG.

The New ELEMENT-Au79 comes to us with the original core as used in the first ELEMENT. The New difference is in the New Pearlized/Solid SOAKER coverstock, or what we can call a "Blended" cover. Now we get a ball that provides traction in the "Heads" or front part of the lane and forgiveness in the Mid-Lane. This combination gives us with a ball that will, Get Down the Lane, and Finish Strong with a Big HOOK!

We found this ball to cover a typical fresh house pattern with no problem! but I use the words, "Fresh" because of the strength of this ball, everyone will need some head oil to get it down the lane with energy. This is a great, first ball out of the ball to open up the lanes with.
Once this ball gets to the pocket... its "Pin Crushing Power" will do the rest!
Great Hit and Mix! This Tweener was throwing pins across the deck with this one!

We then rolled this ball on our Sport League pattern and this ball really FLEXED its muscle. This ball provided strong traction and even stronger hook on the sport pattern! We were amazed at its versatility!

This ball is a keeper for my bag, I know I will find many uses for it on my Sport League and on the PBA Regional Tour this summer. When it comes to typical League play, it will be a great (first game) ball to open up the lanes with. Then you will have to keep moving left to find oil, or just gear down on cover and motor to the Thing Returns.(for those of you who only us Dynothane).

As far as drilling go's, "Keep it Simple" this ball does not need any help to perform at its best. Any 2-piece drilling method can be applied to this ball with No Problem! It will be easy for any style of bowler to match-up with this one! One word of caution, If your a "Cranker" style of bowler, keep the layout on this ball very basic. Also keep in mind that this ball will require alot of head oil to work well for you.

Overall I think this is another great ball from our friends at Dynothane!
A MUST have ball if you bowl any type of "Sport League" or PBA Regionals.

We highly recommend this ball to all bowlers!

BowlPro
Bowlpro

Buckziggy

  • Newbie
  • *
  • Posts: 1
Re: Element Au79
« Reply #3 on: May 17, 2004, 07:09:30 PM »
Righthand - Stroker - 16 mph
15lbs. Ball - Pin at side of fingers
The absolute BEST Ball I have ever thrown.
245 out of the box
Wood or Synthetic - Low series 670
Heavy oil 35-40 ft stand at 25 and throw over 3rd arrow:
1. Miss left - holds and kicks out the corners
2. Miss right - recovers and kills
Light oil - stand 35 and throw over 4th arrow or out to 17 board
Do not drill this ball other than recommended by factory. Its aggressive but not uncontrolable.
This is the ball I have been looking for. 10 years
You don't need a partical ball if you carry this one.

cqsteve

  • Newbie
  • *
  • Posts: 1
Re: Element Au79
« Reply #4 on: May 19, 2004, 02:13:39 PM »
WOW!! I have been using DynoThane's "The Thing" in a 15lb recently with pretty good results and decided to try the new Element AU79 in a 16lb. I'm not a technical specs kind of bowler so I don't know much about how it was drilled but I can tell you I'm very happy with the results of this ball. I'm normally only a 170 bowler but I got a 5 bagger with my first 5 throws the very first time I tried it. It hit the pocket HARD and carried great with lots of pin action. Very forgiving with both the speed and line that I threw. As long as I came anywhere close to my line and gave it a good release it found the pocket and just kept on driving. I ended up with the following games (in this order) on the first night I used it: 185, 202, 169, 234, and 201. The last two games were on a different set of lanes too. I will highly recommend this ball to anyone!!

BuddiesProShopcom - Bill

  • Sr. Member
  • ****
  • Posts: 494
Re: Element Au79
« Reply #5 on: June 11, 2004, 12:46:57 PM »
I drilled this up from Willie Willis with the pin on the grip line and the CG about 3/4" from the grip line. The ball didn't need a weight hole.

First he went out and tested this ball on a house shot. The outsides are dry and the middles are wet. Willie was able to use different break points and get this ball back to the pocket from almost anywhere.

On a variety of tournament shots, this ball was great. On any of the medium to light oil shots, Willie was able to throw this ball and have no problem getting the ball through the heads, and having the ball turn the corner. For the heavy oil shots that he came around he was still able to use this ball, but had to go more up the lane to keep the ball in play.

Overall, I think this ball will fit into a lot of bowler's games. If you are looking for a ball that will get down the lane and give you backend pop, don't overlook this ball. All Dyno-Thane fans, don't miss out on this one.

Any questions, please email me at Bill@BuddiesProShop.com

Thanks,
Bill
Thanks
Bill
BuddiesProShop.com
"The Place All Bowlers Shop"

DynoLess Daddy

  • Sr. Member
  • ****
  • Posts: 369
Re: Element Au79
« Reply #6 on: June 16, 2004, 09:05:40 PM »
The Au79 is clean, clean, clean!!

For those of you who actually like to push the ball up the lane and let the ball do your work.. then this is the ball for you!!

Drilled up two Au79's:
                        (1) 5 x 3 the other (2) 4.5 X 4.5

First off I used this on Pro Avalane with a 36 ft house shot.. The ball started of with an explosive turn..then quickly settled in.. I was able to push the ball out and allow its roll to pick up and do all my work.. The pin action on this ball has been let's say phenomenal!!

Next, I played on AMF with a 40 ft house shot .. a little bump with OB 3 out..
The ball became a quick bender with the ability to stand up!!

The best thing about both is that it maintains control through the midlane..
this ball is for those seeking control with power and not just back-end..
the ball is a keeper!! better thean orig element!!
--------------------
Ft Bliss Pro Shop
(915) 568 7974

Dynodaddy@earthlink.net

arcright7

  • Full Member
  • ***
  • Posts: 123
Re: Element Au79
« Reply #7 on: June 27, 2004, 02:28:02 AM »
Excellent piece.  Effective on many conditions.  Hit and carry is great.  Good looking too.  I had the original Element and did not like it at all.  Glad I gave Dynothane another chance.  I also had the old Skybolt (Storm) and had lots of success with it.  Good to have that weight block back in my bag again.  Nice release DT keep it up!

hammerman11

  • Jr. Member
  • **
  • Posts: 11
Re: Element Au79
« Reply #8 on: July 16, 2004, 03:47:47 AM »
I have been a Hammer man for several years, but I wanted to get a ball with a stronger skid/flip backend reaction and decided to try the Dyno-thane Au79 as Hammer just does not have anything with a good skid/flip characteristic.  This is also my first Dyno-thane ball.

Anyhow, got a 16lb Element Au79 drilled per layout 3, had to add a weight hole to make it legal.  I am a right hander with low to medium revs and medium ball speed.

First time out of the box bowled it on PBA pattern C.  This ball, with that drilling, had a nice non-violent backend break to the pocket that really shakes up the pins.  Even with a light hit this ball really gets good carry.  The first game was 221, the second was 191 (Opened in the tenth, oops)

Games 3, 4, and 5 were a different story as the oil really carried down (153, 153, 174).  This ball had great difficutly breaking to the pocket in the heavy carry down.   The adjustments to throw with a more direct line to the pocket resulted in the ball over reacting and missing left.  

On a house shot this ball has a strong consistent backend reaction and once again really shakes the pins up.  However, on the house shot, this ball is temperamental to the consistency of your ball speed and release.  It does not seem to have as much of an area to play with as some other balls.  Playing with this ball will definitely help your game get more consistent.

In all I give this ball a 8.5 out of 10  as I really liked the backend response and the pin shake up this ball gets.  I would also highly recommend this ball to others.

Garcia

  • Full Member
  • ***
  • Posts: 167
Re: Element Au79
« Reply #9 on: July 16, 2004, 09:27:04 AM »
Drilled - 5.5x3.5, Pin under Bridge,
Cg kicked out, big Xhole on Axis

Coverstock - Box condition

Ive drilled a few Dynothanes and have liked their performance. The Vendetta's have given smooth consistant roll with great carry. This ball however is a little higher performance, more flare potential so I chose a mild drill pattern. The roll on this ball is superb. Extremely heavy revving in the midlane but with no early hook. The box coverstock is fairly mild which allowed me to play straighter. The carry was above almost every other hi-performance ball Ive ever thrown. Probably cause it allowed me to keep a better entry angle since I didnt have to swing the lane.

Only trouble I had was opening up the lane. Its not a big mover on the backend (maybe a different drill pattern would help). But with this coverstock, I made very few moves as the night went on. I never really had to move in deep, I played direct and carried just about every shot I hit the head pin. It scrambles pins, and definitely carries light shakers. Theres very few times Im able to play the "track area", but this one allows me to. This ball is incred, Im glad I found another trick ball for my arsenal.

htotheizzo3561

  • Hero Member
  • *****
  • Posts: 962
Re: Element Au79
« Reply #10 on: July 24, 2004, 04:11:41 AM »
Drilled this Au79 with a 5x5, to complement my sheer havoc.  It complements it to the sense that it is usable when the sheer havoc is not.  really clean rolling ball, with mild bump and jump.  Due to the drilling, my track tracks over the embedded logo, causes a slight loss in reaction, but sanded down the logo, and all is fine.  Really like the way Dyno-thane is creating balls. Dyno-thane is becoming one the big boys now and this ball is a leap forward.

Sniper206

  • Hero Member
  • *****
  • Posts: 575
Re: Element Au79
« Reply #11 on: August 16, 2004, 08:16:09 PM »

 I'll just get to the point here... pin under bridge, cg low by thumb, low h-hole.. Scuffed with green pad....Yes, I said scuffed.

This is probably one of the nicest pieces I have ever touched with my own two hands. Hence the reason for sanding it. It was the most flip I have ever seen on a ball when I left it box, and I knew in order to make it more useable, it needed a dull surface. This is playable on most anything except extreme dry. I love it on PBA and sport patterns cause it gives a clean and consistent reaction on every shot. I've noticed a little ping towards carrying the 10, but other than that, one of Dyno's best pieces since the Thing.


Garcia

  • Full Member
  • ***
  • Posts: 167
Re: Element Au79
« Reply #12 on: August 17, 2004, 12:01:07 AM »
This is my Re-review. See specs on my first review.

I finally had a chance to use this on a fairly difficult condition, and I've also given the coverstock a chance to "break-in". The pattern was similar to the PBA's "B" pattern. On a house pattern, this ball was very smooth, very controllable with very good hitting power. However, some equipment show different characteristics on more difficult patterns.

This pattern is a longer one, usually an inside line is more playable. Because of the mellow backend on this ball, I was a little hesitant to give it a try but I did anyway. While all other balls pushed thru the breakpoint, the Element revved midlane and rolled hard and continuous from the breakpoint! The carry was incredible, and this particular house had grey stripe TWISTER pins aswell (which I could never knock down before).

Considering the condition, I scored really well after switching to the Element AU79. Its a great piece of equipment, and is definitely becoming one of my favs. And it mite become one of my benchmark balls on more difficult conditions. its a keeper.

Dyno-Joe

  • Sr. Member
  • ****
  • Posts: 449
Re: Element Au79
« Reply #13 on: August 31, 2004, 04:44:13 PM »
This ball works great. I absolutly LOVE this ball. At a synthetic house or at a tournament it is the first ball out of my bags. I can play multiple angles and lines with this ball. But when the heads go, this ball goes with it. It has tremendous hitting power and great carry. My favorite thing about it is it revs up quickly and it retains the energy until about 38 to 41 foot, then when it gets friction WATCH OUT! It shreds each rack with pure power and hook. This is how its drilled:  
.....................O O   o

.........................CG

......................O

Well thats it folks. Bye bye.
--------------------
You know whats yummy for my tummy DOUGHNUTS.

recognize_talent

  • Full Member
  • ***
  • Posts: 208
Re: Element Au79
« Reply #14 on: August 31, 2004, 10:39:11 PM »
let me start by saying i was completely disappointed in the hype surrounding this ball and it made me want to never purchase a DT ball again. i say that first cause you might find yourself in the same boat, but do like i did and that feeling will be wiped away. got my gold (cause thats what Au 79 is) went into a tourny with it. that was a mistake thought that the 7 inches of flare would take care of all my worries well i was wrong. drilled it in a stack postion in order to use all 7 inches. 15 lb ball and every time i used the damn thing wouldnt work just went straight. so i took it home sanded it with a b pad came back the next day and was hesitant, but threw it anyway. the thing took of like a bat outta you know what! first couple of balls were brooklyn but once i found the pocket the pins never sounded better. the ball smashes, you come up lite, the ball smashes, hit head, ball smashes. final words get this ball and toy with it, it may not be the best thing out of the box but once you get it to adjust to you, the ball smashes.
--------------------
"Strikes show them you know the game. Spares show them you can play the game." A wise man knows when he is beat, it's time you RECOGNIZE Talent!!!