win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Vendetta Particle  (Read 10377 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
Vendetta Particle
« on: December 31, 1969, 06:00:00 PM »
Ball NPS Score: Not Available
bowling.com has the largest selection of bowling balls
Click here to shop.
The Dyno-thane Vendetta Particleâ„¢ delivers a stronger mid lane motion with a continuous back end reaction. The more aggresive coverstock allows the Vendetta to start up sooner on wetter lane conditions. Ideal on Medium to Heavy oiled lanes out of the box or can be sanded for Heavy oiled lanes.


Weight Block: Single Density Dual Core

 Cover Stock: DTP: Dynamic Tracking Particle

Weights: 12-16 lbs

Finish: 800-Grit Dull

Color: Black Swirl/Blue Solid

Radius of Gyration: Low @ 2.53

 Differential: Medium @ 0.042
Logged

 

scotoco

  • Jr. Member
  • **
  • Posts: 13
Re: Vendetta Particle
« Reply #1 on: February 06, 2003, 08:48:01 PM »
The Vendetta Particle (Med-oily Lanes) I Use Mine On Oily lanes And Have it Drill to Roll Even & Still Get Good Pin Action, Try It You'll Love It, Once Again From DYNO-THANE!!!  
Logged

CompEdgeProShop

  • Jr. Member
  • **
  • Posts: 97
Re: Vendetta Particle
« Reply #2 on: March 03, 2003, 11:48:03 PM »
What can I say another hit from dynothane. I've had mine for a couple months now, and this is definitely my go to ball on heavy oil. Drill it 3 3/8 X 3, get's it into a earlier roll and still has a very good continuation on the backend, with a very readable breakpoint. Have used it on anything from your easy house shot to a sport shot. Hooks with the big boys, but at a lower price, which is nice.
Logged

LongTallLefty

  • Newbie
  • *
  • Posts: 4
Re: Vendetta Particle
« Reply #3 on: March 06, 2003, 12:17:03 PM »
I have drilled two of these balls for customers of mine.  The first is a guy with higher ball speed and nominal wrist action.  For him I went stacked leverage on this ball.  In box condition, he blew the ball through the breakpoint regularly.  I then scuffed the ball with a red scotch-brite, and then, the reaction is like that of a heavy handed player with a pearl reactive.  The combination of the skinny core, lack of revs and speed, the ball gets through the heads smooth and flips and digs on the back end.  This guy thinks I am a God because this ball hits harder than he ever imagined he could hit the pins.

The second was drilled for a player with a 90 degree rotation release, and he flat out rips it!  This ball I drilled up 4" pin with the bias between stacked and the ball track.  This one is not so good.  Not the ball's fault though.  For his game, the core of this ball does not loose rotation soon enough to consistantly grab the back of the lane.  When it does grab, stand back and cover your ears 'cause it HITS!

In all, watch out if you have a lot of hand, this ball will be spooky on most conditions.
Logged

BuddiesProShopcom - Bill

  • Sr. Member
  • ****
  • Posts: 494
Re: Vendetta Particle
« Reply #4 on: April 30, 2003, 02:16:16 PM »
Dyno-thane was kind enough to send our staff member - Willie Willis one of the Vendetta Particle. Willie laid it out with a 4 1/2" stacked layout, leaving the ball in the box condition from the Factory.

The ball play will in oiler lane conditions with this layout.

This Ball is very Versatile with Aggressive movement and an exceptional power punch at the pocket.

GREAT BALL.

After watching Willie throw this on a bunch of different shots, this ball rolls sweet. It is easy to read, and make a controlled move to the pocket. I am sure Dyno-Thane will release a solid reactive version of this ball someday. The Vendetta line has made everyone notice the New Dyno-Thane.

--------------------
Thanks
Bill
BuddiesProShop.com
"The Place All Bowlers Shop"
Logged
Thanks
Bill
BuddiesProShop.com
"The Place All Bowlers Shop"

flow

  • Newbie
  • *
  • Posts: 4
Re: Vendetta Particle
« Reply #5 on: May 17, 2003, 05:19:58 AM »
A fantastic 'control' ball for medium to heavy oil, being in the mid-price bracket makes it even more attractive.

I find the VP to be very versatile, especially on long oil patterns and carry downs. When other balls are going under/over, the VP is the one to pull out.

Being a particle ball, it reads the mid-lane a bit sooner, allow better control at breakpoint. From there it gives a continous arc, homing into the pocket.

Good work! Dyno-Thane.
Logged

towrofstgh

  • Jr. Member
  • **
  • Posts: 37
Re: Vendetta Particle
« Reply #6 on: September 14, 2003, 07:55:51 PM »
I got this ball a few months ago, but didn't decide to drill it out until yesterday after selling off some of my balls from the past 2 years.  I have mine drilled (LH) with the pin at 11 o'clock and the cg centered and a weight hole at 7 o'clock 5" from my thumb.  I tried it out on synthetic with 38' of oil.  I found a NICE line standing on 20 and throwing it out to 15 to 5.  I did get my fair share of 7 pins (more practice for me!).  Anyway, the only thing I didn't like about it was that the backend reaction reminded me a lot of my Reaction Arc:  A very sharp angle once it hits the breakpoint.  I had to be very careful not to top my spin as I did twice during the night (good practice on my 10 pin ugh!).  I rate this ball a 8.5 out of 10 for synthetics.  I'm bringing it out to my league tonight (wood with 36' of oil...medium) to see how it'll do in the 1st game.  In a nutshell, if you want a backend frenzy, then this is the particle for you.
--------------------
Laughter is the language of the Gods.
Logged
Laughter is the language of the Gods.
In my bag (16lbs):

Visionary Gladiator Pearl
Visionary Centaur AMD Solid
Visionary Blue Sparkle Gryphon
Columbia 300 Blue Dot

JuniorsProShop

  • Jr. Member
  • **
  • Posts: 14
Re: Vendetta Particle
« Reply #7 on: October 10, 2003, 06:57:20 PM »
I drilled this ball 45 degrees with the pin 4 inches from my PAP. This ball is unbelievable. I like to play out, but when the lanes don't seem to call for that, I can move into the oil with this ball and really open up the lane. This ball loves to roll, however, still allows a clean read up front. The ball hits unbelievable. I have had the opportunity to use it twice, once on synthetics and once on wood. Both times the lanes called for a big move in and I picked this ball up and bowled fantastic. When those house shots are hooking too much out you can pick this ball up and move into the oil and really create a nice shot for yourself. This ball is definitely a must in your arsenal. Keep it out of the dry area and you will love this ball.
--------------------
John Rubeo Jr.
Dyno-Thane Ball Staff
visit us at Juniorsbowlingshop.com
Logged

PolarMike

  • Newbie
  • *
  • Posts: 3
Re: Vendetta Particle
« Reply #8 on: October 26, 2003, 09:10:39 PM »
What a great second squad ball. All this ball needs is a little oil on the backends and it's one of the best balls I've ever thrown. My layout has the pin about 2" above the fingers and about an inch right of the VAL. It's about 3.5" out, and the CG is kicked out to the right by about a 1/2". The topweight is in the 2.5 to 3oz range. I have it slightly polished with the factory finish, I wouldn't say I'm a cranker but I do rev it enough to where I have to have polish on everything...

The layout carries it down the lane and the coverstock does the rest. With a little oil on the backend to keep it from burning up all it's energy at about 32 feet, it's a great ball to send down the lane. It's also mild enough to not need a ton of oil to throw. Great league ball if your in a building that believes in only stripping once a week, but versatile enough to carry to tourney's, most likely as a second squad ball. This was my first venture into Dyno-Thane and I am impressed. I haven't even mentioned how hard it hits.

Even if you do decide to throw it on strong backends, a little killing of the wrist keeps it hitting for me. If you dont have a good second squad ball to throw, this one definately comes recommended from me.


--------------------
There will never be great leaders so long as we mistake education for intelligence, ambition for ability, or lack of transgression for integrity...
Logged

jjweb

  • Hero Member
  • *****
  • Posts: 743
Re: Vendetta Particle
« Reply #9 on: March 02, 2004, 12:39:28 PM »
I purchased this ball new awhile back; I can’t believe I haven’t written a review for it. I wanted something to roll sooner and handle a medium through medium-heavy with carrydown shot. Its drilled pin under ring, CG kicked out about an inch past ring, weight hole on the PAP. I really haven’t seen a heavy-heavy shot, so I don’t know how it would play. Honestly, at first I did not like this ball at all; I never knew it would do, but after some time and coverstock tinkering, I’ve really started to like it. I prefer it at 600 better than the 800 out of box finish. It’s a very smooth arching ball, which helps blend out some of those tricky shots. For me, I think it carries great! But I do see a little bit better carry with light hits than flush. I like that it keeps the pins low, so I get a lot of mixers. It drives VERY hard through the pocket if you have drier backends, with a smooth move and hard hit. I really haven’t thrown it in awhile, but I just haven’t had the need to.

Some points about it:

It does like to be rolled straight up the back, dislikes side roll.

I found 600 to be its best coverstock grit.

Be careful not to throw it through its breakpoint.

Keep it light in the pocket and it WILL carry!
--------------------
Josh


When in doubt, go buy Dyno-Thane.
Logged

Sir Bowl-A-Lot

  • Hero Member
  • *****
  • Posts: 2981
Re: Vendetta Particle
« Reply #10 on: April 26, 2004, 11:56:28 AM »
15lbs
3" Pin Out
Right-Handed
Bowling on Pro-Anvil Synthetics with a 41 foot top hat and stripped backends.

I had this one drilled label leverage with no extra hole.  This drilling should give me decent length with a real nice hard arc on the backend.  It did just that!  I can either play down & in, or I can swing it out and watch it come back.  Very versatile.  It will get down the lane and start a nice strong roll in the midlane and then continue right through the pins.  It saves a ton of energy for the wood which means that on light or high hits, it will sometimes carry the strike.  It is forgiving to a certain extent.  If I miss my mark by a couple of boards either way, it usually finds its way back to the pocket.  This might be the best particle ball on the market right now.  Very controllable, can handle a wide variety of lane conditions, and hits super hard.

I had this baby drilled back on Nov. 6th 2003
Since then, all I can say is "WOW"
I have primarily used this ball in all three of my sanctioned leagues this fall.  My average has risen from a 197 to around 208.

I have put over 200 games on this beauty and it hasn't lost any of its steam.  I am looking forward to purchasing a couple more and would like to put a more aggressive drilling on it.  Thanks Dyno-Thane!
--------------------
*Don't swing it if you can't bring it.*
Logged
Pages: [1]
« previous next »