win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Help!! Need to know box finish of Black pearl reactive  (Read 1514 times)

5150BWLR

  • Full Member
  • ***
  • Posts: 127
Help!! Need to know box finish of Black pearl reactive
« on: July 28, 2009, 12:20:29 PM »
Help!! Need to know box finish of Black pearl reactive. I seriously f%$ked up the cover by taking a burgandy scothbrite to it and then trying to polish it....it really looks like sh!t and even worse, it doesn't do sh!t on the lanes.
Logged

 

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Help!! Need to know box finish of Black pearl reactive
« Reply #1 on: July 28, 2009, 09:14:32 PM »
Most of their polished pearls use an 800 grit US surface (light grey nylon pad) under a heavy duty load of the Factory Finish polish.

If you've used a maroon nylon pad on it (approx. 320 grit US), I'd suggest using the maroon nylon ad and redo the whole ball, smoothly. Then use a green nylon pad on the whole ball, bringing it to approx 600 grit US. Then use a light grey pad on it to bring it to 800 grit US. Then use their Factory Finish polish to put a high gloss shine on it.

Since everyone's hand application is a little different, you may need either a rougher surface under the polish (green pad/600 grit US) or a finer, smoother finish under the polish (2000 grit Abralon = approx 1000 grit US) to get the same reaction as you did out of the box.

All the above assumes you're using a spinner. If not, take it to a pro shop and ask them to do it.
--------------------
"None are so blind as those who will not see."
Logged
"None are so blind as those who will not see."

5150BWLR

  • Full Member
  • ***
  • Posts: 127
Re: Help!! Need to know box finish of Black pearl reactive
« Reply #2 on: July 28, 2009, 10:43:50 PM »
Charlest, Thank you Thank You Thank You!

I do have access to a spinner...that's what got me in trouble in the first place. The Proshop I go to allows me to get behind the counter and let's me use the spinner. There were a whole bunch of worn out abralon pads and I knew the BPR had a lower grit...I just didn't know what, so I just grabbed a maroon pad (bad mistake) and went at it with the four step approach. It looked pretty bad but thought I'd just throw the polish on there and it should get rid of all the grooves Wrong! So...I'll just get back in there and try again. Thanks!
Logged

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Help!! Need to know box finish of Black pearl reactive
« Reply #3 on: July 29, 2009, 09:29:45 AM »
I suggest: Do not use a pro shop's worn out or even used Abalon pads. Most tend to overuse them to the extreme. I've seen this several times now. They keep using them until they disintegrate in their hands. If you have to, compare them to a brand new one and if they don't feel the same, don't use the used one.
--------------------
"None are so blind as those who will not see."
Logged
"None are so blind as those who will not see."
Pages: [1]
« previous next »