win a ball from Bowling.com

Author Topic: cheap oil removal  (Read 7728 times)

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
cheap oil removal
« on: April 23, 2014, 08:54:58 AM »
What are some cheap oil removal contraptions other than the water bath?

 

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: cheap oil removal
« Reply #1 on: April 23, 2014, 09:01:16 AM »
There is no pro shop in the area with a ball oven

Gizmo823

  • Hero Member
  • *****
  • Posts: 2167
Re: cheap oil removal
« Reply #2 on: April 23, 2014, 09:14:01 AM »
No contraptions that are really cheap, everything is priced pretty close to everything else.  You could get a personal oven, but it would be several years before you made your money back on it, or at least got your money's worth of use out of it. 
What would you be if you were attached to another object by an inclined plane, wrapped helically around an axis?

Steven

  • Hero Member
  • *****
  • Posts: 7680
Re: cheap oil removal
« Reply #3 on: April 23, 2014, 09:44:04 AM »
No contraptions that are really cheap, everything is priced pretty close to everything else.  You could get a personal oven, but it would be several years before you made your money back on it, or at least got your money's worth of use out of it.

It depends on how many balls he has, how often he bowls, and how well he cleans his equipment after use. Most proshops in my area charge $15-$20 to revive a ball, so at $200 for a personal unit, it might not take as long as you're suggesting.
 
For the price of a single ball, I felt that a personal revivor was a good investment. If it keeps a single ball alive that I'd otherwise have to toss, I have my payback.

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: cheap oil removal
« Reply #4 on: April 23, 2014, 10:13:15 AM »
I generally clean mine after each use. I have been slacking lately though, and I have been throwing my older equipment which has a lot of games without an oil removal. Also, my dads arson pearl is pretty much full of oil, so I will hit that one too.

On a side note, a friend just told me how he removed the oil from his first blood and brought it back from death. He took a five gallon bucket, drilled 6 1" holes 3 inches from the bottom, put his ball in it on an empty duck tape roll, put the lid on, drilled a hole in the top to stick a hair dryer through, and ran it on low for a couple hours. Has anyone done anything like this? Is it safe?

Drinyth

  • Jr. Member
  • **
  • Posts: 34
Re: cheap oil removal
« Reply #5 on: April 23, 2014, 10:51:24 AM »
No contraptions that are really cheap, everything is priced pretty close to everything else.  You could get a personal oven, but it would be several years before you made your money back on it, or at least got your money's worth of use out of it.

I don't know about that.  A DIY oven based off a food dehydrator would probably run you under $100.  Even the commercial, personal ovens which seem to use a similar dehydrator heating element (if not the same one) are around $200.  So if your proshop charges you $25 per deoiling, that's 8 sessions.  I know for sure that I do more than 8 balls a year myself, so YMMV.

Quote
On a side note, a friend just told me how he removed the oil from his first blood and brought it back from death. He took a five gallon bucket, drilled 6 1" holes 3 inches from the bottom, put his ball in it on an empty duck tape roll, put the lid on, drilled a hole in the top to stick a hair dryer through, and ran it on low for a couple hours. Has anyone done anything like this? Is it safe?

Maybe?  It's really all about temperature control.  If you can keep the air inside the bucket circulating and at a safe temperature (I certainly wouldn't go over 140 degrees at the very top end - I'd try staying closer to 120 if possible), it's pretty safe.  I've seen other contraptions with a hair drier, cardboard boxes, and a thermometer that people have had luck with, but I don't think I'd go that route personally.  I'd be weary of using a hair drier, portable heater, fireplace, dishwasher, etc. if only because I wouldn't be able to precisely control the temperature.  Holding the temperature steady (and at a safe temp) will provide you with the safest, most reliable oil extraction possible, IMO.

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: cheap oil removal
« Reply #6 on: April 23, 2014, 11:12:04 AM »
I have all the stuff to make one, so I may go for it. I will stick a food thermometer through the side of the bucket and will do a test of it just to be on the safe side

Gizmo823

  • Hero Member
  • *****
  • Posts: 2167
Re: cheap oil removal
« Reply #7 on: April 23, 2014, 11:21:02 AM »
Oh, I didn't know they were that cheap, I thought they were like 600 bucks or something . .

No contraptions that are really cheap, everything is priced pretty close to everything else.  You could get a personal oven, but it would be several years before you made your money back on it, or at least got your money's worth of use out of it.

It depends on how many balls he has, how often he bowls, and how well he cleans his equipment after use. Most proshops in my area charge $15-$20 to revive a ball, so at $200 for a personal unit, it might not take as long as you're suggesting.
 
For the price of a single ball, I felt that a personal revivor was a good investment. If it keeps a single ball alive that I'd otherwise have to toss, I have my payback.
What would you be if you were attached to another object by an inclined plane, wrapped helically around an axis?

Steven

  • Hero Member
  • *****
  • Posts: 7680
Re: cheap oil removal
« Reply #8 on: April 23, 2014, 12:11:25 PM »
Yea, Innovative came out with a personal Revivor for about $200:


http://shop.innovativebowling.com/Personal-Bowling-Ball-Revivor-PerRevivor.htm;jsessionid=2AA13D42153FB54AA5AAB62F708DC40C.m1plqscsfapp04
 
It looks almost identical to the more expensive NuBall unit I have.

Mongo

  • Full Member
  • ***
  • Posts: 180
Re: cheap oil removal
« Reply #9 on: April 23, 2014, 12:21:47 PM »
I hit mine with non-acetone fingernail polish remover after every session.  I've got a Storm Flash Force that has every bit of 400 games and still squeaks like new.

Also, I have no problem throwing a ball in the oven at 150 for 45 minutes if I have to. 
Where are all my 2001-2006 posts?

Nails

  • Hero Member
  • *****
  • Posts: 1703
Re: cheap oil removal
« Reply #10 on: April 23, 2014, 01:41:08 PM »
Dishwasher, no heat dry cycle.  Works like a charm.

Juggernaut

  • Hero Member
  • *****
  • Posts: 6498
  • Former good bowler, now 3 games a week house hack.
Re: cheap oil removal
« Reply #11 on: April 23, 2014, 08:21:36 PM »
Dishwasher, no heat dry cycle.  Works like a charm.

 Done this quite a few times myself. Always seems to work great.

 
Learn to laugh, and love, and smile, cause we’re only here for a little while.

Spider Man

  • Hero Member
  • *****
  • Posts: 11829
Re: cheap oil removal
« Reply #12 on: April 23, 2014, 08:46:00 PM »
+1

Easily the cheapest contraption.





Dishwasher, no heat dry cycle.  Works like a charm.

jazzmdd

  • Jr. Member
  • **
  • Posts: 52
Re: cheap oil removal
« Reply #13 on: April 23, 2014, 11:15:45 PM »
I have used a large rubber maid container with lid that will fit a ball and a food dehydrator inside.  I got the dehydrator on Amazon for $20.00.  The containers are usually $10-15 at walmart.  Works perfect as a homemade rejuvenator.

Long Gone Daddy

  • Hero Member
  • *****
  • Posts: 5471
Re: cheap oil removal
« Reply #14 on: April 24, 2014, 06:31:23 AM »
The instructions in how to use your dishwasher to de-oil your bowling balls is well documented.  If you have one, it is one of the most effective, safest, and inexepensive ways to maintain your bowling balls.  Do a search.     
Long Gone also posts the honest truth which is why i respect him. He posts these things knowing some may not like it.

Mainzer