win a ball from Bowling.com

Author Topic: 508A  (Read 18536 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
508A
« on: December 31, 1969, 06:00:00 PM »
Ball NPS Score: 100.00
- Color: Green/Black/Yellow    All colors do vary somewhat from the picture shown.  
- Core: Modified Legion
- Veneer:  MP GEN 4 Reactive Pearl With  Performance Additive  
- Core Type:  Asymmetrical
- Surface:  800, 1000, 2000  Polished
- A few tiny pit holes in the cover stock of the ball are normal  
- RG:  2.52
- Diff:  .049
- Recommended Lane Condition: Medium to  Medium-Light Oil
- Description:  Track’s intent with the  all new 508A is to bring you a new and improved version of the original  505A.  
 What makes the 508A an improved version of the 505A? First we started  with the ever popular Legion Core that we used in the best-selling Track  ball in recent years, the 607A. Next we worked on creating a cover that  would be just as angular as the cover used on the 505A. After testing  several different covers, we said to ourselves, “if it isn’t broke,  don’t fix it.” By combining the MP GEN 4 Reactive Pearl veneer and the  Legion Core, we have provided Track fans with a ball motion that is  stronger than the 505A while maintaining the same overall look on the  lanes.  
 The 508A, with the help of the MP GEN 4 Reactive Pearl veneer, is  designed to be stronger off the spot that its predecessor. The 508A also  brings a different surface than the 505A as now we use three different  grits of Abralon pads, 800, 1000, and 2000, followed by Powerhouse  Factory Finish Polish.
 Both the intermediate and overall differential are higher in the new  508A which provide more flare potential and a stronger overall core than  the 505A. The combination of the MP GEN 4 Reactive Pearl veneer and the  modified Legion Core, should provide you with a quicker responsive and  overall more aggressive product than the previous 500 series balls.

 

Trackboy2009

  • Full Member
  • ***
  • Posts: 120
Re: 508A
« Reply #1 on: January 12, 2012, 10:29:07 AM »
LANE CONDITION






Length:36 

Volume:light to medium


Type (THS, Sport Pattern etc):THS (Fresh and broken down)


 



COMMENTS





Likes:The 508A prevides good length and recovery on both fresh and carrydown. The layout in my 508A is 45 X 5 1/2 X 75, or pin under the fingers with mass bias kicked out with a hole at 45 degrees at 7 inches. The 508A is very responsive at the break point and is stronger than the 505A. I used the 508A first on a lane that was not conditioned for a couple of days with some open play on it. The 508A still pushed and gave a strong move on the backend. To my surprise very readable and strong even on that condition. When I threw the 508A on the fresh house pattern it was a beast. I had the best of both worlds push and recovery! The colors are eye catching on the shelf and going down the lane.


Dislikes: Sometimes a little jumpy on the dry and wants to squirt on the wet. That is a charteristic of any pearl piece.


 


PICTURES AND/OR VIDEOS

 

 

 


Dan Schaden Jr
Track Pro Shop Staff Member
Vise Staff Member
Dan Schaden Jr
Vise Grip Staff since 2002
Bowlers Corner Pro Shop Owner since 2002

rrbowler

  • Jr. Member
  • **
  • Posts: 14
Re: 508A
« Reply #2 on: January 23, 2012, 12:00:53 PM »
LANE CONDITION






Length:41ft, brunswick synthetic, 43ft wood lanes

 

Volume:


Type (THS, Sport Pattern etc):


 



COMMENTS





Likes:If you liked the 505a this ball you will love, it has similar length but a little bit more of a turn and kick at the pins then the 505a had. I drilled my 508a  with a 5 X 5 drilling it has great length and a hard but predictable turn into the pocket.I would definitely recommend this ball,


Dislikes: 


 


PICTURES AND/OR VIDEOS

 

 

 


Rich Mueller
Track Regional Staff

Percision Shot Making

  • Jr. Member
  • **
  • Posts: 14
Re: 508A
« Reply #3 on: February 01, 2012, 03:32:14 PM »
Hello once again Track fans I'm here to talk about another great piece. The Track 508A this ball has great characteristics it's clean through the fronts and pretty strong down lane. I drilled mines 55x5x45 pin is over my bridge. I love it when the lanes start to break down, because it glides through the fronts and allows me to open the pair up. It's a great medium ball out of box it's not an oil piece so you may not like want to use it on that. If you like the 505a and the 607ase you will love this ball the world wide release date is 2/2/12 so got get yours.


Howard Ball Jr.
Track amateur staff
Vise amateur staff



Hold That

  • Jr. Member
  • **
  • Posts: 76
Re: 508A
« Reply #4 on: February 03, 2012, 10:35:11 AM »
LANE CONDITION






Length:

 

Volume:


Type (THS, Sport Pattern etc): THS


 



COMMENTS





Likes: clean through the heads . 700+ first night in league.  very predictable . it hits hard . 

Dislikes: none


 


PICTURES AND/OR VIDEOS

 

 

 



bowler3008605

  • Jr. Member
  • **
  • Posts: 10
Re: 508A
« Reply #5 on: February 06, 2012, 09:42:36 AM »
Drilled mine with the pin over bridge and cg under ring finger mass bias 1" from thumb and man does this ball work AMAZINGLY. I used this ball friday night for three games on a heavier oil house shot and me being a tweener was able to start out around 12-13 and break at 5 then as the night went along and the third game transition happened i moved to 18-7 and this ball never lost one ounce of hitting power or traction. Haven't had a track ball in 10 years and now i'll never not have one thanks to this ball. EVERYONE should have this ball.



vcuguy324

  • Jr. Member
  • **
  • Posts: 8
Re: 508A
« Reply #6 on: March 05, 2012, 03:22:46 PM »
LANE CONDITION






THS

 



COMMENTS





This ball reminds me of a slightly weaker 607A, when the ball sees the dry it is makes its move.  It has been a solid piece for a THS so far for me.  It has been a nice compliment to the 503C or 716C when I've needed something that gives me more pop on the back part of the lane.  Very clean through the front of the lane, almost to a fault at times, very good piece when the heads are burnt as well.

 


PICTURES AND/OR VIDEOS

 

 

 


Mike McDonnell

Track Regional Staff

Richmond, VA

DeadWood Pro Shop

  • Full Member
  • ***
  • Posts: 136
Re: 508A
« Reply #7 on: March 12, 2012, 06:44:10 AM »
I  know this ball has been out for a while, but business has been good and  haven't had free time to review all of the balls we have been drilling.  My apologies for that. I hope this still helps some people decide to  punch up this great ball.
         
 BALL SPECS

  Pin Length - 3-4
 Starting Top Weight - 3 oz
 Ball Weight -15
 
 DRILL PATTERN
 Pin to PAP - 5inches
 MB Location - 50 degrees
 VAL Angle - 60 degrees
 
 BOWLER STYLE
 Rev Rate - 350
 Ball Speed - 16-17
 PAP/Track - 4 3/4 right 5/8 up
 
 PICTURE AND VIDEO LINKS
 
 
 http://www.youtube.com/watch?v=Mq_e5DPbXjo&hd=1
 
 SURFACE PREPARATION
 Grit - 2000 grit
 Type (Matte, Polish, Sanded) - polish
 
 LANE CONDITION
 Length - 35ft
 Volume - medium
 Type (Wall, Xmas Tree, Sport) - house shot
 
 BALL REACTION
 Length -7/10
 Back End - 8/10
 Overall Hook -7/10
 Midlane Read - 6/10
 Breakpoint Shape - angular
 
 
 COMMENTS
 Carry - This is a great ball  when the pattern starts to open up. the angle to the pocket gets the  corners out great and carry is great with this ball
 Likes -This ball is super  clean through the fronts, with a more midlane thanks to the use of the  607 core. For us, the ball actually turns the corner a little harder  than the 811A
 Dislikes - With all the pearl and shine, this ball is not for heavy patterns. But that is what the T series is for after all.
 Other - My personal favorite ball  is my 505T, and this ball is a PERFECT back up when the fronts start to  dry out, but I need the same shape and hit. It makes changing balls  easy. I don't even have to move when I go to this ball from my 505t.
       
 The Dead Wood Pro Shop Staff
     Not on any manufacturer staff, just a pro shop owner that wants the best equipment in my bag


DeadWood Pro Shop
9307 Boone Road
Houston, TX 77099

  • Guest
Re: 508A
« Reply #8 on: March 24, 2012, 12:07:44 AM »
BALL SPECS


Pin Length: 2-3 in


Starting Top Weight: 3 1/4 oz


Ball Weight: 15 lbs.


 


DRILL PATTERN

 

Morich Dual Angle: 55x5 7/16x 30





BOWLER STYLE


Rev Rate: 400-450


Ball Speed: 17.5- 18

 

PAP/Track: 4 7/16 right 1 1/8 up


 




SURFACE PREP


Grit: 1000 grit


Type: (Matte, Polish, Sanded): Polish, went over the polish with a 3000 grit abralon by hand.

 



BALL REACTION


Length: great length through front


Back End: responds to friction great

 

Overall Hook: overall hook is moderate


Midlane Read: This ball has more downlane read


Breakpoint Shape: Very angular


 




COMMENTS




  

Track 508A


One of the newest balls in our mid-performance line, the 508A is simply spectacular. Wrapped in the cover of the 505A and having the core of the 607A, the 508A gives you length through the front part of the lane, and it has probably the most angular breakpoint shape ever. I am Michael Williams II, PBA Tour player and Mccorvey’s Pro shop technician, using the morich dual angle layout, my 508A is laid out 55x5 7/16x 30. I am considered a power tweener bowler style with a 17.5-18 mph ball speed and around 400-450 rpm. This ball gives me a reaction that is suitable on medium heavy to medium dry lane conditions, when the lanes are transitioned enough to step inside and give it some room. Compared to the Track 503C, this ball has a much more angular breakpoint. Because the 503C comes out of the box without a pearlized shell (MP Gen 4C), it’s gets into a roll a tad bit earlier than 508A (MP Gen4 Reactive Pearl) does. Also, with 508A having the Legion core from the 607A, this ball has the engine to drive off of the friction when it sees it, giving the angularity off the breakpoint to knock out the corners when we start having to move inside. In my opinion, this ball will for the league bowler work best when the lanes have gone through the transition and are broken down, and the bowler starts having to move inside on the lane. For the sport bowler, this ball is best for those medium patterns to short patterns. With there being more oil across the lane on sport conditions, it might be best to knock the polish off of this ball to the desired grit depending on your rev rate, and how early on you want to put the ball in play. Even on sport shots, I still recommend this ball later on in your block when the lanes have been broken down, eventhough, you can knock the polish off and create an earlier roll for use on those fresher shots (still medium lane conditions).