BallReviews

Equipment Boards => AMF => Topic started by: djones on September 18, 2009, 06:45:29 AM

Title: Hype Urethane
Post by: djones on September 18, 2009, 06:45:29 AM
Has this ball been released to the distributors, yet? If not, when is the release date?
Title: Re: Hype Urethane
Post by: charlest on September 18, 2009, 04:28:41 PM
Tekneek owns a pro shop.
See http://www.ballreviews.com/Forum/Replies.asp?TopicID=244351&ForumID=26&CategoryID=12
--------------------
"None are so blind as those who will not see."
Title: Re: Hype Urethane
Post by: beachcomberjones on September 18, 2009, 05:20:11 PM
yep, just got mine in today as well. Same Price as Tekneek

http://i58.photobucket.com/albums/g271/wasahawaiianrat/securedownload-7.jpg

Edited on 9/19/2009 9:29 AM
Title: Re: Hype Urethane
Post by: beachcomberjones on September 19, 2009, 05:34:29 PM
Mini Review

Went with a 5x5 layout on this, wanted it to be very smooth.

http://i58.photobucket.com/albums/g271/wasahawaiianrat/securedownload-8.jpg

Mild midlane read much like any urethane ball but still tails on the end.  Much much stronger than the natural for me.  Also Flairs 6 to 7 inches but it still an arc, never over reacts off the dry.  Played 20 at my feet, 10 at the arrows, 7 break point on fresh 41 foot THS to start.  Not really the condition for the ball but it was strong enough to make it back to the hole no problem. Noticed when i got fast with it, it would push past the break point but still made it back lite.  Moved out closer to the ditch to get some more friction, 10 to 5 and in. Very smooth of the friciton again but rolled up really strong! was very happy and surprised to see this core flair so much.  Would love to see what it does with a weight hole.  Another quick thing about the cover on this hype, after throwing it for a block it never shined up, after throwing a natural for 3 or 4 shots, it shined up real quick.
Title: Re: Hype Urethane
Post by: Z Jellsey on September 23, 2009, 01:32:19 AM
You CANNOT shine this ball (I tried for about 5 minutes )! Truest form of urethane I have seen since reactive began. I am excited to finally have one.
Title: Re: Hype Urethane
Post by: surface_solutions on September 23, 2009, 03:09:57 AM
Kyle, do you always picture your best customers with the products or is that some sort of incentive to purchase the ball?
--------------------
(616) 690-0590
surface_solutions_proshop@yahoo.com
Title: Re: Hype Urethane
Post by: FBM357 on October 09, 2009, 04:02:14 PM
This thing definitely needs polish!!!  Definitely find it to be stronger than the Natural.  Another poster insists it is difficult to polish, well I'm going to find out later this evening! ..  Flares a great deal as well

Will post before and after pics later...
Title: Re: Hype Urethane
Post by: charlest on October 09, 2009, 08:29:51 PM
quote:
You CANNOT shine this ball (I tried for about 5 minutes )! Truest form of urethane I have seen since reactive began. I am excited to finally have one.


Try Beans polish.
--------------------
"None are so blind as those who will not see."
Title: Re: Hype Urethane
Post by: dougb on October 10, 2009, 12:46:02 AM
quote:
This thing definitely needs polish!!!  Definitely find it to be stronger than the Natural.  Another poster insists it is difficult to polish, well I'm going to find out later this evening! ..  Flares a great deal as well

Will post before and after pics later...


As two people said here, in Bowling This Month's review they said it's much stronger than the Natural.
Title: Re: Hype Urethane
Post by: golfnutFL on October 10, 2009, 01:23:16 AM
This thing sounds like the Liberator. That ball did not easily take a shine either!!

The Liberator...I increased grit step by step and then applied polish step by step.

I did not match up with this ball at all...I hope the Hype is different. I do like the Ogre Urethane...to me--the ultimate dry lane ball.

quote:
quote:
You CANNOT shine this ball (I tried for about 5 minutes )! Truest form of urethane I have seen since reactive began. I am excited to finally have one.


Try Beans polish.
--------------------
"None are so blind as those who will not see."
Title: Re: Hype Urethane
Post by: Z Jellsey on October 10, 2009, 01:29:45 AM
I was able to polish it, but not until taking the cover all the way down then back up to 2000. It comes very gritty OOB. I havent found a real use for it yet, probably gonna roll good on Cheetah when I next encounter that pattern. From what I have seen this ball hooks very early and has very little backend reaction which is exactly what I wanted in a urethane ball.
Title: Re: Hype Urethane
Post by: Juggernaut on October 10, 2009, 01:32:05 AM
quote:
This thing sounds like the Liberator. That ball did not easily take a shine either!!

The Liberator...I increased grit step by step and then applied polish step by step.

I did not match up with this ball at all...I hope the Hype is different. I do like the Ogre Urethane...to me--the ultimate dry lane ball.



  900G pours A.M.F. balls, and I believe they also poured the Liberators as well. The Liberator supposedly had the original black U-Dot cover, so i wonder if the HYPE is similar?

 I'm using A.M.F. now ( when I get to bowl ), and used to love my old U-DOTS, so I may need to get me one of these.
--------------------
Good transactions list in my profile

"The difference between stupidity and genius is that genius has its limits."
Albert Einstein



Title: Re: Hype Urethane
Post by: beachcomberjones on October 10, 2009, 02:01:12 AM
Title: Re: Hype Urethane
Post by: charlest on October 10, 2009, 08:56:41 AM
Real urethane is hard, no doubt about it. It is also why  once polished it goes longer and hooks less, very unlike resin.

Also "real" or "true" urethane does NOT make a dry lane ball by any stretch of the imagination. They are medium oil balls, unless your ball speed far exceeds your rev rate.

This is why Visionary's Glowing AMulet and now their Ogre Urethane use HARD surfaced solid urethane and polish these balls at the factory.

Their polished Slate Blue Gargoyle is a "real" pearl urethane.

quote:
This thing sounds like the Liberator. That ball did not easily take a shine either!!

The Liberator...I increased grit step by step and then applied polish step by step.

I did not match up with this ball at all...I hope the Hype is different. I do like the Ogre Urethane...to me--the ultimate dry lane ball.

quote:
quote:
You CANNOT shine this ball (I tried for about 5 minutes )! Truest form of urethane I have seen since reactive began. I am excited to finally have one.


Try Beans polish.
--------------------
"None are so blind as those who will not see."


--------------------
"None are so blind as those who will not see."
Title: Re: Hype Urethane
Post by: charlest on October 12, 2009, 07:31:08 PM
quote:
Wow, you mean I could have used my Pink Hammer for Medium oil? Gee Charlest, I thought All ball companies had control of the Urethane formula''s to make Urethane''s for All lanes surfaces!
--------------------



Don''t try to twist my words. You know better than that. Play politics somewhere else.
--------------------
"None are so blind as those who will not see."

Edited on 10/12/2009 7:31 PM
Title: Re: Hype Urethane
Post by: charlest on October 13, 2009, 12:19:27 PM
quote:
Hey, you've called me out on blanket statements, you did one yourself, deal with it!
--------------------
Seahawks Fan! I don't hate other NFL teams, just their Fan's!


I won't get drawn into such useless and counter-productive childishness. This is the kind of thing that many have used to try to bring ballreviews down to their level. I won't participate is such schoolyard, macho child play. I've told others the same thing.

This is not a playground for you to see who has the biggest ego. The SOLE reason we are here is to help each and share information. That is all I will do. If I am wrong, I will accept it. If I can help someone learn, I will do it. I ask questions, so I can also learn. And that is it.

You want to play children's games, go play with someone else.
--------------------
"None are so blind as those who will not see."
Title: Re: Hype Urethane
Post by: 230-n-up-or-bust on October 13, 2009, 01:04:15 PM
quote:
quote:
Hey, you've called me out on blanket statements, you did one yourself, deal with it!
--------------------
Seahawks Fan! I don't hate other NFL teams, just their Fan's!


I won't get drawn into such useless and counter-productive childishness. This is the kind of thing that many have used to try to bring ballreviews down to their level. I won't participate is such schoolyard, macho child play. I've told others the same thing.

This is not a playground for you to see who has the biggest ego. The SOLE reason we are here is to help each and share information. That is all I will do. If I am wrong, I will accept it. If I can help someone learn, I will do it. I ask questions, so I can also learn. And that is it.

You want to play children's games, go play with someone else.
--------------------
"None are so blind as those who will not see."



This message brought to you by the "Damnit, Let's Throw Down Right Now Association of America"
--------------------
Return with your shield or on it.  Strength and honor.  Help control the population of Avenging Unicorns. Arm yourselves accordingly.  MTIXE

"I'd give my right arm to be ambidextrous."-Nick Faldo


Title: Re: Hype Urethane
Post by: BeansProShop on October 14, 2009, 12:16:04 AM
quote:
You CANNOT shine this ball (I tried for about 5 minutes )! Truest form of urethane I have seen since reactive began. I am excited to finally have one.


Try the Secret Sauce.... i guarantee it will shine it..

Beans
--------------------
www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Pro Shop Owner/Operator
 Check out current eBay auctions at:
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=bowling_with_leah Official Pro Shop of "ALL" F.O.S. Members!!!
Title: Re: Hype Urethane
Post by: FBM357 on October 14, 2009, 11:01:52 AM
quote:
quote:
You CANNOT shine this ball (I tried for about 5 minutes )! Truest form of urethane I have seen since reactive began. I am excited to finally have one.


Try the Secret Sauce.... i guarantee it will shine it..

Beans
--------------------
www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Pro Shop Owner/Operator
 Check out current eBay auctions at:
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=bowling_with_leah Official Pro Shop of "ALL" F.O.S. Members!!!



HYPE Urethane is made of Kryptonite!!! .. .you need the weight of an anvil + Beans to get a dull shine on this rock
Title: Re: Hype Urethane
Post by: beachcomberjones on October 14, 2009, 03:20:56 PM
+1 Kryptonite!