win a ball from Bowling.com

Author Topic: Blazing Inferno  (Read 26828 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
Blazing Inferno
« on: December 31, 1969, 06:00:00 PM »
Description:

The Blazing Inferno is a higher RG version of the original Inferno. Even though the inner core shape is the same as the Inferno, 1.17 pounds of weight have been moved from the inner core to the outer core. This shift in weight results in a significantly more cover heavy ball. The RG-min of the Blazing Inferno is 0.068” higher and the RG-diff is 0.017” lower than the original Inferno. This change in mass distribution allows the Blazing Inferno to be a better match-up when reduced traction through the heads and the mid-lane are desired.

Compared to your original Inferno:
-The Blazing Inferno will match-up better to drier lane conditions and shorter patterns.
-The Blazing Inferno will match-up better to lane surfaces that are in less than ideal condition.
-The Blazing Inferno will match-up better for bowlers who struggle with early ball reaction.

Brunswick’s new Activator Coverstock has quickly established a reputation for excellence in ball reaction, durability and longevity of ball reaction. On the lanes, Activator Coverstock is clean through the heads with excellent mid-lane recovery and a strong arcing back-end reaction that creates powerful pin action. Owners of the original Inferno have reported that it requires less frequent resurfacing and rejuvenations and is more resistant to cracking than other reactive coverstock balls.

Utility
Out of the Box: With its High Gloss Polish finish the Blazing Inferno will match up well on medium-dry to medium-oily lane conditions.
When dulled: The Blazing Inferno hooking action will increase and its arc will become more even, creating a better match-up for oily lane conditions and further blending the over/under reactions seen on wet/dry lane conditions.

Reaction Setup
Warning: The Blazing Inferno is a low differential ball. This means that high RPM players can use leverage pin positions and medium-low RPM players may need a flare increasing hole to achieve the most aggressive ball reactions. See Brunswick drilling instructions for symmetric core low-differential balls.

The Blazing Inferno is finished with a high gloss surface which enhances its appearance and reduces hooking action in the oil. High gloss finishes can sometimes cause over/under reactions, too little hooking action in the oil, then too much hooking action off the dry, which can be hard to control. To increase hooking action and smooth out the ball reaction dull the surface, first with a fine 800-1000 grit abrasive or grey pad. If more hooking action and a smoother reaction is desired dull the surface of the ball with a coarse 320-400 grit abrasive or red pad.

Bring your Blazing Inferno back to its original Factory Finish with Brunswick’s new High Gloss Polish. Available at your local proshop.

Coverstock
Activatorâ„¢
Color: Red/Orange pearl
Hardness: 77-79
Glow Engraving
Factory Finish
High Gloss Polish
Core Dynamics
RG Max: 2.564”  
RG Min: 2.531”
RG Diff: 0.033”
RG Avg: 4.3
Performance
Hook Potential 110
Length 115
Breakpoint Shape 90
Available Weights
11-16 Pounds


 

BlazingAssassin88

  • Newbie
  • *
  • Posts: 4
Re: Blazing Inferno
« Reply #31 on: February 27, 2005, 04:43:39 PM »
I've owned this ball for about half a year now.  It's the best ball I've ever bought.  Personally, I think the only reason that Brunswick took this ball off the market is that it gave the bowler an unfair advantage.  Make sure you wash the ball, and it'll stay consistent and deadly.
--------------------
The future of bowling is here...And I'm only the half of it.

Sofloridarevs

  • Jr. Member
  • **
  • Posts: 6
Re: Blazing Inferno
« Reply #32 on: March 02, 2005, 12:19:45 PM »
Drilled my Blazing with the pin just right and below the ring finger.  CG pretty much in the center of the grip.  Box surface.  Having not thrown a Brunswick ball in nearly 5 years, I have to say I am impressed with this ball.  Gets down the lane with ease and does not make a jerky move, but covers a lot of boards.  The hit is spectacular, ball carried everything and from different angles too.  Great ball for when the lanes break down or if you bowl a 2nd shift. I have to give this ball an 8 out of 10.
--------------------
NEVER FOLLOW

bOwLiNgPiMp243

  • Jr. Member
  • **
  • Posts: 24
Re: Blazing Inferno
« Reply #33 on: March 15, 2005, 01:13:03 PM »
LOVE IT!
Lane Conditions: Dry
Typical Conditions: Variety of Shots
Type of Lane: Combination
What part of the lane did you play? Second Arrow
Did the ball track out? Normal
Weight of bowling ball: 15
Surface of bowling ball: Polished
What grit was the surface of the ball? 600
Likes: GOES LIKE LONG!!!!!!!
Dislikes: Oil...

This ball is what someone would use on a bone dry condition! or a short sportshot/PBA pattern. I got this from my boss Dave! and the pin is underneath the ring and the cg is kicked to the right... with a weight hole on the right. If there is a heavy amount of oil, this ball just glides... but once it hits a dryspot, it jets off!!!!!!great carry! love it! i cant wait till i get a short pattern on saturday morning sport shot! but it will stay in the tote for tourneys only. its one of my "extremes".

--------------------
I LoVE BOWLING! i just can't seem to bowl good....
***********************************************
Come to Dave Olm's Pro Shop @ Crown Lanes,Tampa Fl! Were the BEST!
***********************************************
cuz ima... []D [] []\/[] []D

Gene J Kanak

  • Hero Member
  • *****
  • Posts: 3005
Re: Blazing Inferno
« Reply #34 on: March 29, 2005, 12:47:49 PM »
Specs:
15lbs
Pin 4-5"
Drilled pin above bridge (RH), cg on negative side of grip center, no weight hole
Box finish

Pros: Gets down the lane with ease, receptive to changes in hand position, hits like all Infernos--Nasty hard

Cons: Sensitive to speed, not user friendly

Overall: This is a nice piece of gear, but you have to know when and how it wants to be used. This is not a go long and rip back ball for dry lanes. At least, that's not what mine does with this drilling and my style. For me, the Blazing is a good option when there is dry to bounce the ball off on the outside. It seems to like being rolled more than cranked. That works perfectly when the heads are gone and there's a nice dry bumper up the outside. Under those conditions, I'm able to stay right and fire it up the outside. As soon as it touches the dry it digs in and makes its trek toward the pocket. Once there, it tosses pins like a bandit.

After throwing this ball a little, I can see why some people didn't like it. As I stated above, you have to know when and how to use it. If you are patient enough to figure out its place, however, you won't be disappointed. It's a very good ball for lighter conditions. I would say a solid 7.5 out of 10.
--------------------
I can't bowl 300, but I can bench 320 : )

sparebowler138

  • Jr. Member
  • **
  • Posts: 6
Re: Blazing Inferno
« Reply #35 on: April 23, 2005, 04:12:16 PM »
Weight:15lbs
Pin:3-4


I have had this ball for one day so far and I love it, it goes very long with predictable backend and big hook.  I am impressed with this ball, i didn't think it would hook this much and my ball driller didn't even drill it the most agressive.  The pin is to the right of the ring finger with cg pretty much in the palm with no balance hole.  I hope to see great success with this ball!
--------------------
I use

Brunswick Nemesis
Brunswick Blazing Inferno
Storm Vertigo
Storm Fear Factor
Ebonite Maxim

jutterbowl

  • Jr. Member
  • **
  • Posts: 13
Re: Blazing Inferno
« Reply #36 on: June 03, 2005, 10:27:33 AM »
Great ball when heads burn up. Gets down lane nicely and still makes strong move on backend. If not used on right conditions, you may run into issues with carry.

lorin_23

  • Jr. Member
  • **
  • Posts: 7
Re: Blazing Inferno
« Reply #37 on: June 18, 2005, 11:15:55 PM »
Weight: 14 lb 12 oz

I recently recieved this ball from D Pat (by the way, great transaction) and I've fallen in love with it. I'm a tweener with medium-high revs and am most comfortable throwing over ten with my breakpoint at around the 3 board. Well, this ball has really helped me develop a much bigger arch in my ball.

After taking care of some timing issues, I began throwing this ball regularly in league. On my sport shot, I have been able to throw it over 15 and out to about 7, and get it to shoot into the pocket. Trust me, this thing definately has some hitting power. I would recommend it to just about anyone.

Oh, I'm not to up in the know on the entire drilling thing, but the pin is under my ring finger. Don't know if that helps anyone...

Dyno-Joe

  • Sr. Member
  • ****
  • Posts: 449
Re: Blazing Inferno
« Reply #38 on: June 19, 2005, 05:31:45 PM »
I got this ball for $50.00. Ball had the pin up and to the left of my middle finger. This ball goes long and arcs really nicely on the backend. I tried to keep the ball in box condition. Great addition to my arsenal. Can be a little jumpy if the backends are too dry, but that was expected.
--------------------
***SLAYER***

cjbballplaya07

  • Newbie
  • *
  • Posts: 3
Re: Blazing Inferno
« Reply #39 on: July 08, 2005, 01:43:53 AM »
THIS BALL BLOWS

thehead

  • Newbie
  • *
  • Posts: 1
Re: Blazing Inferno
« Reply #40 on: July 20, 2005, 03:42:06 AM »
16lbs 1oz
2.9 top
2-3 pin
drilled
pin 1/2 in off ring finger
stacked
not sure of where my cg is
box finish

righty
18-20 mph
mid high revs
power stroker

drilled the ball two days ago and threw it about 15 games last night. so far i utterly LOVE THIS BALL. i wanted it to go long and snap and from what i can tell it is gonna work just fine. The ball starts this massive roll at about 25-30 feet and, like a sniper rifle, i can predict where the ball will hit the second it leaves my hand. Except for the numerous smash 8 and 9 pins i left last night this ball carrys VERY well.

I was throwing the ball on what started out to be a nice amount of oil actually and I had to slow it down some to make it work at first. once the lanes started braking down the ball was quite viscious.  I started out playing up 8 and ended up 15-8 with full, normal, speed.

I picked this ball up on ebay for 46 bucks shipped NIB and am considering a couple more for the closet or for different drillings. If you are in need of a longer ball with some good snap on the back end, and with the power to completely DESTROY racks, you might want to pick up one of these last lot balls on ebay. It's a VERY GOOD ball for the money!!!

nikvik

  • Newbie
  • *
  • Posts: 1
Re: Blazing Inferno
« Reply #41 on: December 09, 2005, 11:09:19 AM »
Bought the Blazing Inferno on-line, had it drilled with pin straight up between
index and middle finger.  I tryed it the first night with out-of-box polished
finish.  After a few practice shots, I moved left 8 boards and started to nail
the pocket consistantly.  Carry was tremendous compared to the Hammer I was throwing.  Had a 670 the first night, can't wait until next week.  We have a very
short pattern, with very little oil down.  Even on the dry, this ball held off
busting until the very end.

LeoAnalyn

  • Full Member
  • ***
  • Posts: 105
Re: Blazing Inferno
« Reply #42 on: July 27, 2006, 07:51:13 PM »
I have this 15lb ball since 2004 and still my first choice on any league. Of course Always drained the oil out every 60 games or if start leaving 10 pin. Drilled the ball 2L and Cg is slightly toward between two fingers with Balance hole. For High RPM bowlers. Got My Second 300 on this ball
..........o
.....O..O
.........
.........o.
.........
.......T.
I used it on a Medium Oil lane then if still to much oil then I switch to Intense Inferno.

SteveAustin2808

  • Hero Member
  • *****
  • Posts: 1417
Re: Blazing Inferno
« Reply #43 on: June 08, 2007, 10:05:51 PM »
Brunswick Blazing Inferno
Weight: 15#
Pin Placement: 0.5-1"
Top Weight: N/A

Layout:
4 1/4" Pin Below the Ring Finger. CG slightly kicked out. No Weight Hole.

First Impressions:
For the high performance ball category, you would think this one performed like a mid price ball. I couldn't get a consistent read with the OOB finish so I scuffed it with 1000 Abralon and put Factory Finish polish on it. With a duller surface and some fresh polish, I started getting a better look from the Blazing.

General Thoughts:
Very amazed at how much length the Blazing provided me. I was even more shocked that my AMF300 Orbit Xtreme 5 1/2" Pin from PAP layout gave me an earlier roll than the Blazing.

Comparison/Contrast:

Blazing Inferno vs. Orbit Xtreme

As said above, quite shocked that a negative layout on the Orbit Xtreme would give me more backend than the Blazing. Even with the 1000 Abralon finish and Factory Finish polish, the Orbit Xtreme OOB was more ball. The Blazing is a better piece to play straighter angles with though, more predictable on this line than the OX.

Conclusions:
For the medium side of dry and heavier side of light oil, the Blazing Inferno, if you can find one is the ball of choice.
--------------------
McCorvey's Pro Shop Staff
http://www.mccorveysproshop.com/http://

--TRACK & TAG TEAM COACHING--
"Building Success Stories, One Bowler at a Time!"

Evolution Tag Team Member # 1
Michael Price - Office Manager
McCorvey's Bowling World Staff - Phone: (256) 539-1560
Hammer Amateur Staff
michaelp@mccorveysproshop.com

noturcuzin

  • Hero Member
  • *****
  • Posts: 1529
Re: Blazing Inferno
« Reply #44 on: February 13, 2008, 10:22:31 PM »
I'm going to start this review by saying WOW!!!!!!!! The Blazing Inferno is the best bowling ball I have ever used on a broken down house shot. I could throw the ball out and it would make a violent and extremely controllable move into the pocket. If you can come across one of these buy it, you won't be disappointed. Blazing Inferno rating-10/10!!!!!!!!!!!
--------------------
I'm a pyro, I play with inferno fire without getting burned.

jestep

  • Newbie
  • *
  • Posts: 2
Re: Blazing Inferno
« Reply #45 on: February 23, 2011, 09:16:39 AM »
Ball is great for medium to dry conditions, or trashed house lanes. Goes very long, and has a very strong, forgiving finish provided the conditions are right. May not have enough/predictable traction for low rev or high velocity bowlers. I bowl medium speed, high rev, and this ball provides a ton of control all the way through. Took a while to get used to as I had to move about 12 boards to the right to compensate for the distance. Had my first 600 series the 3rd time I used it.
 
This ball is bad to unusable in heavy oil. Get some decent shots every once in a while, but the ball becomes unpredictable. Skid through the pins one time, gutter next, strike after. Just not worth the effort.
 
Overall I think it is a great ball on the right conditions. I always had problems putting the ball on the left of the head pin, even with supposedly low hooking balls. This cured the problem instantly. Ton of control, ton of length, but again, not on a lot of oil.