BallReviews

Reviews => Brunswick => Topic started by: admin on December 31, 1969, 06:00:00 PM

Title: Fuze Detonator
Post by: admin on December 31, 1969, 06:00:00 PM


Coverstock: Proactive MTX-1

Color: Black

Hardness: 77-79

Factory Finish: 35-Micron Trizact

Core Dynamics:

   
Performance:

   
Available Weights: 12-16 Pounds



View the official Spec sheet including Drill Instructions
Title: Re: Fuze Detonator
Post by: BowlPro on February 03, 2002, 10:14:33 PM
The FUZE Detonator is a Good Blended Ball!

Again from Brunswick comes the next of the FUZE Series!
using the same weight block design as used in the RAGING RED FUZE,
but a new Particle/Reactive blended cover stock!

This ball out of the box is too much for most medium lane conditions but
with a little help from "Black Magic" and this ball is ready for that
fresh league condition! Oil is the answer here! Find some and your ready to score!

We label Leveraged our test ball with the pin at 1:30 4"from the PAP
This ball rolls smooth and strong! Good hit and carry!
Not a big Hooker! but predictable! Because of the blended cover stock you
will find that this ball will work well on the Medium to Heavy Oil lane conditions!
We also find this ball a good choice for Slick Plastic lanes.(Syn)
Again, the more oil you find the better this ball will work out of the box!

Of the FUZE Series we thought that the RAGING RED was the best to date!
but I think we can now say that this one is up there too!

This ball will not turn heads! Its milky black shell just does not attract attention to itself!
but for a Brunswick Ball, it will perform well for many bowlers! Just remember that shell adjustment is the key here!

We will recommend this ball to our customers and to all bowlers!

BowlPro
www.discount-proshop.com
Title: Re: Fuze Detonator
Post by: Bob Hanson on March 04, 2002, 04:02:42 PM
For you guys with plenty of hand don't even look at this ball, you will never find a place for it.  Also, if you are bowling on a 10 to 10 with plenty of dry outside you don't need it.  However if you are the kind of stroker who knows how and when to move inside, this ball should give you the hit that you haven't been getting in there since the oils took on the viscosity of molasses.  The Detonator is the ball Brunswick should have made when they came out with the navy sparkle.  I drilled this ball 4 1/2 by 3 1/2 with no extra hole.  On a 10 to 10 wall with a 40 foot buff and fresh back ends I went right to 15 and never let the ball drift outside of 8. Carry was excellent, with no flat 10 unless I really made a bad pitch.  As a comparison, my Vortex 2 would have been leaving corners before I got to 12 board, and its a strong reactive.  

Like most good Brunswick stuff the Detonator reacts best when you roll it firm off the back.  Get to the side and it will still work, but you can literally see it wasting energy trying to stand up.  The Detonator is in the class with the popular HPH, but you can tell the lower rg core right away.  We play on heavy long oil around here, and the last go to ball I had for these conditions was my Deep Violet.  I will be disappointed if this ball doesn't do the same thing for me.
Title: Re: Fuze Detonator
Post by: YeahHossNV on March 05, 2002, 12:08:09 PM
i drilled this ball with the pin over the middle finger with the cg in the center of the grip. this ball lets me play many different shotsi can throw this ball with a way outside angle but i am also able to play straight up the boards which is really unusual for me and a proactive. this ball hits harder than anything i have ever thrown.this ball also has a nice long consistant reaction. the one thing i will tell u is u might want it drilled a bit more aggressive than this. i am gonna drill a flare increasing balance hole. this ball is nearly perfect. the cover is very versital you can polish, sand, and use rubbing compound and they all change the ball to do so many different things.
Title: Re: Fuze Detonator
Post by: Dwight Albrecht on March 13, 2002, 01:54:01 PM
Thank you for reading this review.

The Fuze Detonator is Brunswick’s latest entry into the Fuze line with this one geared for oily lanes. This Black Proactive/Particle Ball is Brunswick MTX-1 Coverstock sanded at Brunswick’s 35 Micron Trizact Finish. The MTX-1 is Brunswick Middle particle load category. The weight block is similar to the Raging Red Fuze, which is a medium R.G. at 2.50—and medium Differential of .04--. This combination should give this ball strong hook and backend reaction.

I drilled the Fuze with the Pin 3 3/8 from my axis pin down and placed the mass bias/C.G. to the right of my grip center. Weight Hole at 4:00 angle to make statically legal.

I used this ball at three different houses and saw 3 slightly different reactions. On HPL synethic lanes freshly oiled, the ball really had a hard time revving quickly, even with a pin down drilling, it labored its roll. It still scored well but did not roll as quick off my hand compared to the Brunswick Monster Purple, which came out this last year. The monster core seemed to rev or roll quicker off my hand and had an earlier reaction than the fuze. The fuze gets through the heads cleaner and back end’s harder, but seemed like its core was one of a higher torque. More hand was needed to get it rolling.
 
The hit was comparable to the Purple Monster, I left a few more solid ten’s with the fuze, which I tested on the same condition. At the 2 wood lane houses the ball rolled a little quicker and hard stronger backend, but again for my release, which is a low tracker/spinner, the ball labored its roll. The balls that rev quicker seem to match up better to my game. I have been to many tournaments recently and have seen many top players doing well with this ball. The best release for this ball is the “Up the Backer” or the Bowler that puts a lot of forward roll on the ball. For me the ball “even factory sanded” skidded and did not roll enough for me to consider it an oil ball. When polished the ball is very impressive from an inside angle on a drier lane condition actually gave me better ball reaction than my competitors bowling the same line against me.

I am not disappointed in this ball. It just does not match up to my game as well as balls from Brunswick, like to HPH’s or Purple Monster’s. After throwing this ball I feel a higher Pin Out with a strong pin distance, “Flip Leverage” would work quite nice on this ball. I will be writing a second review on this ball and will update the review in the near future. The best game for this ball would be either the “Up the Backer”/”Down in Inner”, or the Cranker looking for a ball that they can over power the lanes. This ball would not be intended for spinners or low revved players at least on oil.

Thank you again for reading my review and best of luck to you and your Bowling.

Dwight
Title: Re: Fuze Detonator
Post by: Brad Basart on March 18, 2002, 01:45:17 PM
The Detonator I received wasn't the best to work with.  The pin was 1" from CG and the top weight was over 4oz.  Knowing the cover would probably make it hook too soon, I took some rubbing compoung to the surface, and the Storm "clean an polish" stuff.  This filled in the shell a little, but far away from shining the ball up.  Being right handed, I turned it to stack the pin and CG under my ring finger.  I ended up shifting 3/4" to the left as well to ensure the pin was under my ring finger.  Quality control bit me in the butt on this one though.  When I took the ball to the scale to confirm it would pass at ABC's, it had over 2oz. positive side.  After putting a big hole into it to get down to about 3/4oz, I took it to the lanes.  My home lane conditions are pretty well walled up.  Massive amounts of oil in the middle, down the lane about 42ish feet.  Outside 10, the oil is pretty thin.  Anyway, first 3 games out of the box, you knew when the ball came off the oil.  It moved left in a smooth strong hook to the pins.  Flaring was smooth.  Performance was good enough that it made the excursion to Billings.  Used it for the entire weekend.  Ball reaction was continuous.  My home house has wood backends.  I didn't notice any distinct difference in the backend reaction between home and the HPL lanes at Nationals.  Both gave me very good carrying power.
Now seems to be the discouraging part.  20 games are on this ball now, and the backend aggression seems to be fading.  Actually, this is reminding me of the ball reaction I got from the original proactives.  Since I've been out of the pro shop industry for about 3 years now, I haven't kept up on all the product changes w/ Brunswick's line.  I'm beginning to think things haven't changed that much though with their coverstocks.  My Danger Zone HPH seemed to hold it's consistancy much longer.  If you already have Brunswick proactive equipment, you probably already have something similar to this ball.  If you want a ball with a durable coverstock, this ball appears to be holding up very well.  Very little visible track marks for me so far.  If it fits your needs, give it a try.
Title: Re: Fuze Detonator
Post by: BigART on March 21, 2002, 10:59:12 PM
I had this ball drilled powerfull for maximum backend reaction 3" PAP and 3 ounces of top weight.  The ball is basically drilled 1L on Brunswicks guide with an added weight hole.  

I am currently using the Raging Red and Purple Pearl Fuzes, both great balls.  This ball reminds me of when I had my Red Alert and Pro Azure ball combo its like I have my old combo again with the Red Fuze and the Detonator.  The Detonator is just like the Pro Azure in that when the Raging Red doesn't make the turn because of to much carry down the Detonator will.  I never did like my Pro Azure that much because the lanes had to be just right to use it.  I did shoot 300 with both my Pro Azure and Red Alert, but the Pro Azure just wasn't what I was looking for and it is apparent to me that the Detonator isn't either.  I wanted this ball for heavy oil to replace my worn out Chaos and it just isn't enough ball.  I thought about roughing up the cover, but I would rather buy a ball that is more aggressive in oil then the Detonator.

I read a review in one of the bowling mags that says this ball is a "Superhuman Big Boy Bowling Ball".  I would have to disagree.  

If you have average speed and slower this ball might be great for you, but if your like me and throw 19+ it wont make it back unless there is a clean backend or dry outside.  I could see the ball trying to rev up and turn but it just kept sliding out!  If you like the Pro Azure then this ball will be great for you.  

Good luck and good bowling!
Title: Re: Fuze Detonator
Post by: nk on May 10, 2002, 11:18:26 AM

The detonator is a wonderfull ball. It dose the best on oil lanes. The more OIL is out there the better it does.
I got the drilled for the most hook. I can stand at 25 and throw at 15 at a angle and the ball come rowing back into the
pocket.  The ball is good for people that do not have alot of reves on there balls.
Title: Re: Fuze Detonator
Post by: Huddersfieldybc on June 27, 2002, 08:19:23 AM
Hey everyone
Got this ball last week as i wanted a BALL ON OILED LANES as my rock on had started to loose its reation. I am inpressed with the results my first series was 620 with a high of 210 and a low of 202 (pritty consistant). I will see what its like in weeks to come but i will say that from the games i bowled it does a hook a lot, a very lot!!!
overall 8/10 not bad at all!!!!
Title: Re: Fuze Detonator
Post by: RonBeuoy on November 09, 2002, 10:37:47 AM
This is a great ball that cuts threw the oil and carries great as well. I just shot my first 800 with it last night. out of the 3 games I left two 7 pins, two 10 pins, an eight pin, and a pulled shot that left the 3,6. the rest carried, out of 36 possable I had 28 strikes.And by the way I only had 2 strikes in my 3 10th frames. So I think it is safe to say this ball gets the carry.
Title: Re: Fuze Detonator
Post by: GKPNavy on November 25, 2002, 08:02:50 AM
I am a high speed medium rev bowler.  I had my detonator drilled very aggressive in order to get through a heavy oil condition.  This ball is fantastic in a heavy oil condition.  Even with my speed it breaks through the heads and drives hard into the pocket.  It hits with explosive power and is very forgiving if I get to far outside.  The only drawback is when the lanes begin to dry out.  You might as well put it away.
Title: Re: Fuze Detonator
Post by: MIrons - SF bay on January 24, 2003, 11:30:27 PM
After all of my friends told me that they love their fuses, I had to try one for myself.  I definitely was not dissapointed!  I have this ball drilled with the CG 1" right of the midpoint of my grip, with the pin 3.5" out towards 1:30.  I did have it drilled with a balance hole about 5" out, on the centerline of my grip.  This ball has a surprising grip on backends, whether they are oily or spotty.  That is the strong point of this ball.  It seems to be able to cope with spotty conditions very very well.  It seems to store up the oil on the track and use it where needed.  It rarely jumps left, and has a very consistent break point and angle.  I do recommend that you use some polish with this ball, because if you are like me (good amount of turn and lift, lots of speed), you will definitely need it.  
I have read quite a few reviews on this ball, and all of them seem to point out how good this ball is on oil.  I tend to have better luck with mine on conditions that have a lot of carrydown.  
Overall, I would have to give this ball a grade of 93%.
Title: Re: Fuze Detonator
Post by: Brian Green on February 04, 2003, 10:34:06 PM
got this baby drilled stacked leverage.... i use this for extremly heavy oil or when their is no backend.....   this ball is the most underrated heavy oil ball in my area  in my opinion......  the detonator just explodes on the backend  where no other ball in my bag will carry a corner pin because the ball dies on the back  this ball carries everything...........  This ball is a definately winner from Brunswick
Title: Re: Fuze Detonator
Post by: Bouwens on July 08, 2003, 10:06:42 PM
I bought this ball simply because of the reviews here at ball reviews.com.  I was looking for a ball that I might use once or twice a year on extremely heavy oil.  I am a high speed, high track, and high rev rate bowler.  I had it drilled 4 1/2 x 4 1/2, basically the the same as my V-2 sanded.  I wanted to use my V-2 sanded as the bench mark.  I have thrown it on two different conditions, practicing on the everyday house shot (swing 15 to 10) and in our local "PBA condition" league.  The Detonator was right out of the box (no surface modification).  The amount of hook was less then what I was expecting.  The Detonator surprised me by not over finishing on the fresh back-ends, this can be a problem with the V-2 sanded.  After four games the detonator was still finishing strong, I expected to start losing the back-ends and was surprised with the consistency that the Detonator showed.  It is not the hooking ball that I was looking for, but I that think that it definitely has earned a place in my bag.  Overall I give it a 9 out of 10.
Title: Re: Fuze Detonator
Post by: Tallaght kingpin on July 09, 2003, 09:16:19 PM
I have to say that im a fan of brunswick but this ball was a disaster.I bowl on heavy oil week in week out and it just doesn't do the job it skids right down the lan. Im a fast medium rev bowler and when theres oil it just doesn't move. ON medium lanes its a god sent but just not what im looking for. Ill stick with the X-Factor Reloaded as its top notch when it gets tough.
Title: Re: Fuze Detonator
Post by: krislacson on November 09, 2003, 10:03:18 PM
I just got this ball drilled up about two weeks ago.  I dont know much about pin layouts but this ball is drilled with the pin above my ring finger and the cg in the palm of my hand.  i dont know if its me, but i cant get this ball to react well for me consistently.  Usually it rolls out to early or overreacts and hits the pins brooklyn.  i think i just need to get used to the ball a little more.
Title: Re: Fuze Detonator
Post by: tonygee on November 13, 2003, 03:35:52 PM
15lb
105 degrees
1/2 neg, 0 finger

Good ball, no complaints, fits right in as an arc ball.  Lively pin action.  


I think I'm gonna quit.  Practice practice practice then WHAAA??? ball is dead... learn a ball's characteristics then HUUUUHHHHH???? ball's a marshmellow...  Practice and bowl for twenty years then ARRGGHHHHH bowler with the cash or a sponsorship for a ton of new balls, but is also a good bowler, and he crushes me.  I'm caught in a spiral, UGHHHH I'm dizzy I'm going to bed, this games too expensive...
Title: Re: Fuze Detonator
Post by: BornToBowl on November 16, 2003, 12:53:02 AM
Hi Everyone!! How are everybody doing??? Well, this is my review for the Fuze Detonator. I got it drilled Brunswick Layout Sheet's 1L. And let me tell you this. This ball's hitting and carrying power is ABSOLUTELY INCREDIBLE!!!!!!!!!!!!! This ball is also EXTREMELY FORGIVING!!!!!!!!! Whenever I miss my strike target, I thought it would just go into the gutter. But it surprises me every time. It looks like the ball knows where the pocket is. When I send it wide and off target it rushes back to the pocket and punishes the pins!!!!!!! It sends a lot of messengers whenever it hits the pin. When I accidently throw the ball to the left it doesn't over react and it goes into the brooklyn and still give me a strike!!!!!!!!!!!! It's unbelievably controllable!!!!!!!!!!!!! I love my Fuze Detonator!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! If you are looking for a good ball, then look no further!!!!!!!!!!!!! I mean with the hit, control, forgiveness, and power the Fuze Detonator possesses. It's impossible to not get at least a 200 when you are doing your stance and follow through correctly. Just remember, if you do your part (stance, pendulum swing, lift and follow through) then the ball will do it's job to help you knock all those pins down. Well good luck everyone!!!! Have a fantastic day!!!!!!!!! Peace!!!!!!!!

                               ~Patrick~
Title: Re: Fuze Detonator
Post by: SAR1stuNNa1 on November 16, 2003, 09:45:42 PM
This is the most versatile ball in my lineup. It doesn't matter if the lanes are
flooded or if they are bone dry, this ball reacts the same. However this ball
tends to burn up energy fairly quick. I have this ball drilled with the pin under
the ring finger with the CG under that about three inches away.
Title: Re: Fuze Detonator
Post by: LuckyLefty on December 05, 2003, 04:23:48 PM
Sweet!!!  Or as Kate S. used to say to me, Sweeeettt,
Oh Lucky so SWWWWWEEEEEEEEEEEETTTTTTTT! But that's another review!

On to the boring details that make this so SSWWWW, er um exciting!

Picked this heavier oil gem up from Liquid Hero, perfect specs, good price and fast shipping!!  And a lot of patience with me!  Pin out almost 4 and top weight 3 ounces!!  

Laid on one of my new drillings that are becoming my favorites on this heavy load backend snapper and it is a 3 3/4 X 4 1/2 with the cg down about 1/2 inch below grip center and the pin up about an inch above ring finger and just a bit to the side.  Just slightly to the label side of stacked or about a 90 degree drilling.  This setup seems to give me the lefty troika, early read, lots of revs in the midlane and a stronger than arc look in the back with tons of punch and drive at the pocket.  Remember Mike Tyson at 21!  

Note the particulars of this setup (long pin outs never worked for me before is the cg down).

This ball has a beautiful motor!  Seen it, thought it looked great and wonder what took me so long to own one!  

Not really a true heaviest of oilers in my mind(but maybe it could be), but it is fairly straight in the heads and then, rev rev rev near the breakpoint, grab, charge!  There is no doubt where the pins are going.

I could see grabbing 3 of this core, putting this drilling on all 3 Detonator, Eliminator and Igniter and making some serious hay!  Thanks to this fantastic core.

I compared this ball to my Big hooking heads and backend Reaction Roll(drilled stacked 3 3/4), and this ball is about 3 to 4 boards straighter with foot placement(I attribute that to the higher rg core compared to the Roll)and has every bit of the same ability to turn the corner from inside and mash and trip out all 10.  Say the Roll was played 17 to 9 this ball was played 14 to 8 to strike).

Whether it is the strong motor or the dynamic top weight and pin position I don't know but this ball can bring it!

A great deal of space compared to my Walter Ray and Blade Pearl and this ball which I think I will narrow by applying some Black Magic or if I don't like I may try one of finer grit trizacts.

As to heavy oil when left out of box, This ball may actually work as one will be forced to tighten up much more immediately than say Reaction Roll which one may still try to loop in the heads.

Final is this ball can bring it!  It's immediately in the bag though I'm not sure if it is going to end up being more of an Eliminator with Polish or end up taking the heavy oil spot and then an Eliminator picked up!

Count me as impressed!  I love the motion of this core coupled with this drilling!

REgards,

Luckylefty
PS saw a buddy of mine shoot about 789 with this drilling on this ball and I said hey I'll try that!  Agrees with me!
Title: Re: Fuze Detonator
Post by: MikePruis on December 18, 2003, 09:36:09 PM
I really love this ball, it hooks, and is a good ball on lanes with a little oil on them. I recomend this ball to anyone looking for a real good ball. Drill it any size, and trust me this ball is good don't listen to any of those "bad" reviews, those people must have gotten a different ball???

THIS BALL ROCKS


ps. if you could give me some tips on how to through a good hook[half the time I can't get it to hook it just spins like a top] Email me at seaworthy_5@hotmail.com         Thanks MIKE
Title: Re: Fuze Detonator
Post by: AznFlameY2K on March 21, 2004, 12:21:32 PM


This ball is a great ball, compared to my colubia super beast, primal rage, and messager... this ball carries really good... creates powerful pin action.... great for oily lanes but on wood or anything that's near dry... you'll need a pearlize ball... pro actives tend to over hook as i know... but for a first time user from resin balls to particle balls... this ball is great... it's strong and hits hard..... i have to stand 2 spots from the left gutter for this ball.... so it hooks a hell of a lot but the way it comes in creates a lot of pin action.... i'm an off and on bowler ... i can bowl 200's on some days but i usually bowl in the 150's with this ball i can consistently bowl 170's .... increased from 2 strikes a game to 5... the way i release the ball now i need a plastic ball to convert the 10 pins, i haven't been able to convert all of the spares even using a pearlized super beast... if this would be my only ball i wouldn't recommend it unless you're always bowling on medium to heavy oil.... ----by the way... the roll of this ball is very predictable... you'll know it'll definately come back---
Title: Re: Fuze Detonator
Post by: tonygee on September 02, 2004, 01:59:26 PM
Some balls just hit great no matter what you do to them.  The Detonator is one of them.  Remind you I'm just reviewing MY Detonator which may have different Pin and Tops than other Detonators. My first drill was a 1:30 with negative side weight.  It hit good on the right shot, otherwise it went long and snapped too late (probably due to the high top after drilling), but very good hit.  

Second Drill, I added a 1 1/4 Hole in the middle of my span to take out all the top weight, the ball moved when it encountered dry then sat when it re-entered the oil quadrant and finished with a Smash similar to a marble hitting a National Park Redwood.  The pins laughed at me, I was humiliated.

Third Drill, Rev Leveraged, with the big hole filled I was not able to get back the top weight so I wasn't expecting miracles but the ball hit pretty good, it rolled early and finished pretty strong, definitely did not expect this.

So what did we learn today children? (Mr. Robinson in Mr. Robinson's Neighborhood...Eddie Murphy in SNL)  We learned that a Marshmellow is not always SOFT...and Turds are not always Brown...and that Osama is not Saddam... and that Michael is not Janet... and that a Democrat can speak in a Republican Event...and that it is wrong to be accused of taking drugs if you don't inhale...and that bowling should not be labeled a blue colored sport...at least not until blue colored workers get that second mortgage to buy thier Fall Season equipment.
Title: Re: Fuze Detonator
Post by: b_long4133 on February 26, 2005, 10:39:28 PM
My Dad gave me this ball because he is a cranker and it didn't work for him...so if you're a cranker you might want to think twice about this, but then again I'm not a cranker and my dad thinks that if a ball leaves a 7 or 10 pin that the ball sucks...Now how I feel about the ball: I love this ball. It's definitely the best ball I've ever thrown(i'm only 17 so i haven't owned too many balls but you get the point). I had a messenger before I got my detonator and this ball is far better. It's also very versatile. I usually stand on the 15th board and shoot at the 2nd arrow, but when the lanes are dry I can move over to around the 25-30th board, go at the 3rd arrow and the ball still hits hard and strikes. Or when ever i'm mad I don't even move and just start winging the ball down the lane and it still strikes. The ball is forgiving too, if i miss my mark a couple of boards to the right, it flares back nicely and still gets into the pocket, if i miss it a couple of boards to the left it'll stay right on line and not over hook, but when it does move over a little too much it will strike in the brooklyn pocket as well. I have a plastic ball to shoot the 10 pins and i've never really tried to go at 10 pins with it so i can't help you with that, but with how perfect this ball is i don't think there should be a problem with it...
Conclusion
This is a great ball, works great on all conditions unless the lanes are super super dry...then i get into some trouble trying to keep the ball under control. but other than that small problem, I can't think of anything bad to say about this ball.
Title: Re: Fuze Detonator
Post by: giedonas on October 13, 2005, 12:21:50 AM
Aside from being a black ball (which is my favorite color), this ball has been a "bomb", "C4", "dynamite", whatever...coz it really detonates the pins (not literally of course. So much for the creative review.

I'm not sure how my ball was drilled, I always tell the pro shop to give the ball maximum settings. Anyway, back when I was still bowling at 20 MPH ball speed, it already rocks! It really has that late vicious hook, making it good for lanes with a good back end. When I learned to slow down to 18 MPH ball speed, it even got better, having a steady back end finish, with me having plus or minus 2 boards allowance. The ball really rocks whether you are a smooth bowler or a power bowler like me.

It had few backdowns though...
It is steady at the back end...but not that steady.
If you have a lane with heavy oil on the sides and dry on the center, well...
...I'm not so sure...coz if I miss a board to the left, the ball snaps like crazy at the back end leaving me probably a 3-6-10, or any 3-6 combination, or worse, any 4-6 split combination.

Overall Rating:
I'd say it is a 9 out of 10.
Keypoints:
Great impact at break point.
Great hold for good back end lanes.
It's BLACK! (...just kidding...)
Good stable hook.
--------------------
"I am Alpha and Omega...the beginning and the end...your FIRST and your LAST..."