BallReviews

Reviews => Brunswick => Topic started by: admin on December 31, 1969, 06:00:00 PM

Title: Raging Red Fuze
Post by: admin on December 31, 1969, 06:00:00 PM
The Raging Red Fuze features an Aggressive Reactive (AR) coverstock based on Brunswick's classic PowrKoil18 reactive. This new AR Material has been specially to retain the characteristic aggresive reative reaction to the dry outside boards and backends of typical league conditions, while at the same time providing increased mid-lane traction to the heavier oiled sections of the lane.


The Raging Red Fuze also features a totally new Geometrically-Balanced, medium-low RG core, which has been designed to produce heavy mid-lane roll that leads to an aggressive backend reation.  In combination with a split density outer core that provides perimeter top weight control, the total core system of the Raging Red Fuze provides exceptional mid-lane and backend strength.


The state of the art fusion of Aggressive Reactive coverstock and high-tech core work together to create a ball that will provide superior reactions for a wide variety of bowlers on typical league conditions.  Because of its ability totraction in the oil and respond quickly to high friction areas on the lane, the Raging Red Fuze will deliver outstanding performance for most bowlers on medium-dry to medium-oily lane conditions.



Specifications are as follows:


Coverstock: AR (Aggressive Reactive)

Color: Raging Red

Hardness: 77-79

Factory Finish: Polished

Core Dynamics:

   
Performance:

   
Available Weights: 12-16 Pounds



View the official Spec sheet including Drill Instructions
Title: Re: Raging Red Fuze
Post by: Dwight Albrecht on November 18, 2001, 09:56:17 PM
Hello Readers,

Thank you for reading my review. This Ball is Brunswick's latest release in the Top Line Reactive Family of balls. The Raging Red is one of the Most Richest looking Red's I have seen in a ball. Beautiful colors and graphics in this one. The AR aggressive reactive coverstock is from the danger zone family of balls, which is Powercoil 18.

The weight block is one of a Medium Rg. which should allow this still get throw the heads which a stong diff. Which means this ball should transition hard off the oil to dry.

I drilled this ball with a pin out 2" and positioned it 3 3/4 " from Axis. I placed to Cg to the right of center of grip. Weight hole on my axis.

The 1st lane condition I tested it on was at Bowlero, which has HPL panels. Oily insides and dry outsides for a lane condition. Oiled to 30' buffed to 45'. Dry backends. On this lane condition it was all power no control. If I swung the ball outside it went throw the nose. If I played more up the boards, the ball did not finish. It is very fustrating not knowing where your breakpoint is. Overall not a match for this condtion. The next day I took the ball back to my shop and sanded it duller on my Ebonite Powerhouse resurfacing machine to a grey fine scotch brite pad which sands the ball to a 800 smooth sand, or pretty much to take off the factory polish. I also took the weight hole bigger to negative statics hoping this would give me a little smoother breakpoint. It worked.

The next night at Village Bowl on Wood Lanes. Oiled heavy with little back, the ball worked wonderful. It was smooth and powerful. The factory polished caused to ball to be to sensitive to oil and dry. The light sanded gave the ball more of a banana shape reaction that still hard very hard. Ice cold nines did not upset me, I was hitting the pocket with confidence. Shot a 681 which is a season high for me at this tough wood house.

In closing, if you are going to leave it at a factory finish I would recommend drilling more of a "Arc" layout. If you want to be aggressive with drilling, a coverstock tweak might be necessary. Either way, Brunsick latest reactive definately shows some muscle with this one.

Thank you for reading this review and Best of Luck with your Bowling endeavors.

Dwight
Title: Re: Raging Red Fuze
Post by: GLC300 on November 21, 2001, 01:47:40 PM
Just got my Raging Red Fuze and its a great ball. Rolls nicely to the pocket and has great hitting power. Haven't used it much yet but the reaction and the pin carry seems pretty good. Need little drier conditions for it to hit for me. I have decent speed and good axis 45 deg. Been struggling a little lately and this is a good ball because I can read it great. Rate of 8 out of 10. Still need to find a good condition for it to perform its best. Drilled Max lev.
Title: Re: Raging Red Fuze
Post by: InternationalBowler on November 23, 2001, 11:56:58 AM
See my profile for style.

Drilling 5¾” 45°, box finish. By far the snappiest Brunswick ball I have. I have had trouble when trying to open the lane with my other Brunswick balls. The result would often be weak ten pins and washouts. This ball solves that problem. Good hit and mix. Needs head oil to get to the break point. Seems to handle carry down pretty well.
Title: Re: Raging Red Fuze
Post by: Paul Meyer on December 02, 2001, 12:51:22 AM
I drilled mine 5 1/2 x 5, tested on a fairly tight synthetic shot 7-7, with a small amount of backend. Almost every Brunswick ball i have drilled in the past 2 years has hooked at my feet and quit, but this ball was totally different. The first game I played the lanes straight down and in and even could yank the ball and still carry, and when i missed right to where every other ball i threw it was OB, no this ball just flipped back. As the night went on, I kept moving left and moving my eyes into the oil line, with the same results as earlier. Whenever i missed right it would recover incredibly strong. This ball never quit and certainly didn't hook early. Very impressed by Brunswicks newest reactive ball. Brunswick is being agressive with their marketing and promos, and with balls that react like this one....they are making a nice comeback, give this ball a try.
Title: Re: Raging Red Fuze
Post by: A-Z Proshop-Jeff on December 14, 2001, 10:45:53 PM
I have to thank Brunswick for this ball.  I used a 35 degree drilling and this ball flips like you would not believe.  It can handle a heavier oil pattern and still flip.  It can handle a flat pattern, and still flip.  The ball also seems to repel oil.  I threw 22 games over a weekend period and I found almost no oil on the ball after any shot.  Thank you again Brunswick for the ball and this great product!
Title: Re: Raging Red Fuze
Post by: Bob Hanson on December 26, 2001, 05:20:26 PM
I drilled this Fuze out 4x3 and didn't put an extra hole in it yet.  I wasn't sure where this would fit in my arsenal because I am already throwing a Trauma and an ER which by specs should be fairly close.  However, I like Brunswick stuff so I thought I would give it a try.  Out of the box I experienced the same thing other reviewers mentioned, that being it was a little squirley with the factory polish.  After about 10 shots I used a gray scotch bright to knock the high polish off.  This gave it much more of the Brunswick look in the midlane, but I certainly wouldn't call it early roll.  I was playing on a heavy crowned armor plate finish that was buffed to about 42 feet.  The hardest thing was finding a place on the lane to really challenge the ball. I threw a variety of shots into the dry and even more tight up about 13 board.  Swinging the dry I was able to get good length and didn't notice any real tendancy to over react on this shot.  Compared to my Trauma it still started up a little earlier, but was much more angular in Brunswick fashion when it made the turn.  As I moved farther into the oil and squared up more the differences from the Trauma became more apparent.  The Fuze doesn't squirt quite as bad in slick heads, making it a little easier to square up.  I also noticed a little more of an arcing action from the Fuze than the Trauma.  By the time I got to 13 board I started matching it up to my ER.  No real comparison here.  The ER opens up the lane in places where I am still squared up with the fuze.  Still the overall hit wasn't too bad even though it wouldn't open them in the heavy oil.

In summary if you are a Brunswick fan you probably want this one in your bag.  It edges out the Demolition Zone as being their strongest reactive in awhile, but the pearlized shell will let it play on drier stuff than you would expect.  The overall aggressiveness is close to the Trauma, but there are enough subtle differences that I am probably not going to replace the Trauma.  As a total oil eater it isn't close to the ER, but it will handle much worse heads than will the ER.  Versatile is probably the best term to describe the Red Fuze.
Title: Re: Raging Red Fuze
Post by: SKIP on December 27, 2001, 09:53:21 AM
I drilled this pup using a 4x4 w/ a weight hole on my pap and the cg kick out to the right a bit.  I left the ball in box condition.  I thought this one would be close to my Buzzsaw Cherry Peal since they both use the powercoil 18,  but no, my cherry pearl likes oil more than this one.  Bowling on synthetics 40' 10 to 10 standing on 20 out to 12to7 and the ball does not finish.  BUT WAIT, move over right and shoot the 5 board throwing 18mph and forget about it, this ball really comes alive, as soon as it reads the dry, WHAM hard left turn into the pocket and it crushes.  Throwing this line I do not leave any 10 pins just ten in the pit.  When the lanes break down then I can play a swing shot.  This ball does not over react but the move on it is very nice, a good revving stong moving ball.
Title: Re: Raging Red Fuze
Post by: YeahHossNV on December 28, 2001, 10:18:03 PM
i drilled the ball to go long in medium oil with a pin above the ring finger known as brunswick layout 2L. the ball gets great length with amazing backend and pin carry. the ball also has a very consistant break point. it can be very forgiving when needed. this ball is a bit stronger than the demolision zone. in fact this ball is taking the demolisions place.
Title: Re: Raging Red Fuze
Post by: UNObowler01 on January 04, 2002, 08:47:25 PM
This is one that Santa Claus brought me for Christmas.  He really aims to please!

This is only the second one of these that I've laid eyes on.  I drilled one for a stud lefty in town, and he loves it.  So I decided to break out of my 'Columbia Only' shell and punch it up.

I drilled it in a 3 3/8 x 5 pattern (a sort of over-the-label drill), but I offset it a bit to come out with more side weight.  The pin is next to my ring finger, and the cg is 3/4 of an inch right of the grip line.

Well, for a tame drill pattern, the ball sure is mean!  It doesn't hook out of the house by any means, but it gives good length and very strong roll.  This is one of my favorites on a house condition, because it is so predictable.  I tested it on a normal house condition (fairly dry outside 7, wet middle, semi-clean backends).  I can rev it up and never worry about over-reaction.  Just smooth, powerful hit every time.  It definitely has a spot in the tournament arsenal.  This is a ball that will cover many facets of the game-strokers will like it because it gives a strong roll without having to hit it too hard, and power players (like myself), will like it because it is very predictable, even with more rotation.  

I'm sure feeling better about Brunswick now, hope theres more like the Raging Red Fuze to come!  9 out of 10 for its control and power, loses a point because for an 'agressive reactive', it can't cover that many boards.
Title: Re: Raging Red Fuze
Post by: mtk469 on January 10, 2002, 02:38:36 PM
I purchased my Raging Red in late December. I had been bowling with a Track Enforcer but it was just hooking out of the house. I needed something with a little more length and backend snap. Had it drilled up on a Tuesday before league. I went ahead and threw during league without any practice??? It took about 5 frames to realize what it was going to do after that it was sweet. Shot 196-218-237=651 not to bad for the first night.

I wasn't comepletly satisfied with the out of the box finish so I threw it on the spinner hit it with some quick sand and then wet sanded it with 1000grit. This was a much better match for my game. Smoother Reaction and it hits like a Mack Truck. I have only used it in 2 shifts so I will post a more detailed review when I have more info.
MK
Title: Re: Raging Red Fuze
Post by: Precision on January 12, 2002, 12:00:20 PM
The Raging Red Fuze is an excellent addition to the Brunswick line. The Ball has a fairly high differential and medium/low RG core wrapped up in an aggressive pearlized reactive coverstock. In addition to the pearlized raging red coverstock looking good I've also found that it tunes very well to adapt the ball to varying lane conditions. The match of core/coverstock creates a ball that reads the midlane very well while providing exceptional backend strength and hitting power. I've drilled this one up for bowlers of different styles and each has loved the reaction the ball has given them, this one makes the weaker bowlers look strong and gives the strong bowler all of the power, control and predictability they need. In my opinion, Brunswick has hit a homerun with the Raging Red Fuze making it one ball you must have in the bag for league and tournament competition.
Title: Re: Raging Red Fuze
Post by: hammerbowl on January 13, 2002, 04:17:44 PM
This is a fantastic ball that hooks a ton and then more.  I stand way left and throw the ball out and in and the ball still hooks.  I can put the ball 15 feet from the head pin on board 12 and the ball races to the pocket hard and demolishes the pins.  It is the hardest hitting ball I ever have thrown.  I shot a 569 and 655 with this ball and I am a 170 average bowler.  You need this ball in your arsenal.
Title: Re: Raging Red Fuze
Post by: brunswickcomplete on January 13, 2002, 07:55:57 PM
out of the box= 224-279 (first 7)-237=740,normal league oiled shot on  synthetics
 good mixing hit, clears heads well with a good mid-lane read
to a strong move thru the pindeck.(anything wide still made it back to the pocket)
drilled #2 on brunswicks drill sheet by S & B PRO SHOP W/
the ball choice a recommendation from Ed Rondot (see his reviews & profile,
he explains in a very detailed manner whats going on.)
overall the red fuse is a 9/10 by brunswick.
Title: Re: Raging Red Fuze
Post by: IHateThe6thFrame on January 19, 2002, 04:18:39 PM
WOW!!!!!
I got this ball wiht a 3" pin drilled with the 2L drilling on the Brunswick sheet. This ball comes back with authority. i Haven't bowled with it on a sport condition yet but on a top hat it over hooks. Aggressive really does describe this ball. It doesn't snap but it hooks but then continues to hook. Definetly another great Ball from Brunswick.
Title: Re: Raging Red Fuze
Post by: jkaiser on January 30, 2002, 03:53:37 PM
Layout:
PIN- placed just below the ring finger
CG- placed on midline below the pin

The ball goes through the front part of the lane with very little effort.  It is very predictable, and when you need to move in, this ball will get around the corner.  The ball really reads the dry portion of the lane.  It is a great ball for when you need too open up the lane and project it away from the pocket.  The ball gives great versitillity.  You can play up the boards or you can get in and swing it.  When there is a little more oil on the lanes i would put the ball away and go with something else.  This ball does need some dry boards  for it to work really well. This ball is a must have for any tournament players arsenal.
Title: Re: Raging Red Fuze
Post by: Greatness on March 06, 2002, 06:15:27 PM
This was another damage special at my work i had to fix.  This ball is set up almost the same as the demolition zone, pin 3/4" from ring finger and cg kicked out 1/4" to the right.  The raging red fuze is almost identical to the demolition zone.  The only difference i could tell is the fuze went 5-7 feet farther down the lane before it made the turn.  It has the same deck clearing power as the demolition zone.  I prefer the demolition zone because of the hard arc, it was a little more forgiving but both are fantastic balls.

Greatness
Title: Re: Raging Red Fuze
Post by: Charlie Lacy on March 07, 2002, 09:38:36 AM
Excellant aggressive reactive by Brunswick; ball has hook at
break point of a solid but in a pearl cover. I drilled mine
4 1/2 by 3 3/8 and got medium length with a dramatic move
but I was elated with the hitting power of this ball. I have
been able to use it on fairly heavy oil and still get a decent
reaction. Ball seems to work great from all parts of the lane.
Title: Re: Raging Red Fuze
Post by: Ryan Peebles on March 14, 2002, 09:37:58 PM
First of all, I would like to thank Michael Cimba (The Pro Shop at Nesbits' Lanes, Inc. in Plumborough, PA) for this ball that I won in auction on this very website!

I used the 2E drill pattern (CG below midline + X-hole in lower right quadrant = a pin-down setup for early roll and strong hook).  I was looking for a reaction similar to the reactive Danger Zone series.  Well, this ball has a much sharper entry angle to the pocket.  I took the advice from a couple other reviewers and sanded the surface to a 1500-grit sheen to moderate the over/under reactions of the box finish.

The Raging Red has seen ABC league play only once: a respectable 640 series.  However, I have rolled a few practice games, all of them above 200.

Fresh oil (about 40" in length) suits this Fuze just fine.  This ball will jump on the dry, but when it hits the hole, watch out!
Title: Re: Raging Red Fuze
Post by: drillwizard on April 26, 2002, 12:27:28 PM
Had this abll for some time now just never had any extra time to review


This ball to me is a control ball unless the backens are flying.

I have mine drilled 4 1/2 x 4 1/2 hole on PAP

I love to use it on drier conditions or spotty conditions,
i get a very true roll out of it not as snappy as you would think of this ball.

Carry is above average but not spectaular

For me it seems it was advertised incorrectly as a big snap ball I find that is just not true, if you try this on heavy oil its great for straight spares.


hook-6
carry-7
predictability-9.5
Title: Re: Raging Red Fuze
Post by: tburky on April 30, 2002, 10:43:14 AM
Axis coordinates are: 4-3/4" right and 1/2" up.
Pin distance from cg: 3"

Ball Layout: Pin 4" from axis and c.g. 3" from axis. C.G. is approximately 5/8" above grip midline. Weight hole 6" across.

I had this ball since March 22, 2002 and I have been testing and experimenting with the ball.  This ball is a lot stronger than I thought. This ball checks up on me really quick on the lane.  I lightly stripped the polish off this ball as well as polish with storm diamond gloss polish.  And...the ball still checks up on me. I have tried this ball on numerous patterns with the same result.  I am not saying this ball is bad at all. Had I known how strong this ball was I would have done a different layout. I believe the layout I used was wrong and that is why I have the reaction I see.  I do think this is a good ball for a lot of individuals. This is the strongest pearl I have seen since the Black Ice.  I do plan trying another red fuze in the near future.

Title: Re: Raging Red Fuze
Post by: chango on May 10, 2002, 10:36:41 PM
Ball specs:  15lbs., 3oz., Pin:  2-3", TopWeight:  3oz.
Pin:  1" above & slightly right of ring finger, CG:  below ring finger half way to thumb hole.
Me:  Righty, tweener with medium ball speed & revs.
I've been using this ball since November in league and tournaments. GREAT BALL!  This ball "TOTALLY REEKS OF AWESOMENESS"!!!
My favorite "go-to" ball when the Firehawk's leaving splits or not carrying. Best for medium-oily conditions. This ball revs hard and hits hard in the pocket!  A beautiful reaction-very smooth & revving on the lanes and at the pins! Forgiving and can carry the "off-hits"(light & Brooklyn).  The coverstock (PowerKoil18) seems to be very lively as it can really make the pins move & dance around horizontally!  A reaction, I believe is very unique to this ball.  Also polished up to save energy and hit for the backend.
Good control and hitting power! Effective on all lanes as long as not too dry or too much carrydown.  One of my favorites and very versatile ball! If I only had one ball to use, this would be it.  A winner from Brunswick!!!  GO FUZE!!!
Title: Re: Raging Red Fuze
Post by: Russ1 on June 01, 2002, 11:42:52 AM
Hi,
My name is Russell Boynton. I've been bowling since I was 5 years old and I'm seventeen now. During my sothmore year in high school, I joined the high school team at the varsity level. Right then, I knew that I was going to need a high performance ball. So, I went online and found this one. As soon as I looked at the ball's characteristics, I knew that this ball would be the right one for me. Following that decision, I got the ball for my birthday, which the ball was new at the time. After going through the season having a lot of practice with it and learning how to use it correctly by my coach, I now have been bowling beter than ever. Also, I started excercising and that's made me an even beter bowler too. With this ball, I threw my first 600 series ever,my highest average ever, and my highest game ever. Right now, I'm in a summer league and my current average is high. Since I got this ball, My average his rised from 145 to 176, and my high game rised from 214 to 243. So, this ball is awseam and I would reccamend it for everyone.
Title: Re: Raging Red Fuze
Post by: Bob Hanson on July 10, 2002, 10:34:05 AM
This is my second review, but it is for a different red fuze.  My first review was for a Fuze drilled 4x3 that I ultimately found to be my best strong reactive ball, edging out the Trauma and the ER.  This review is for one that I drilled 2x2 for some early roll and control.  I used a pin out, low top weight ball and only needed a small balance hole to make it legal.  I first tried this ball on the difficult 36 foot pattern at Tucson in the Senior Masters.  It took me all of 2 shots to realize it wouldn't work.  However I brought it back home and tried it on a heavily crowned anvil lane shot and was very pleased.  Many people have mentioned the over under they experience on a box condition Red Fuze.  While that is easily tweaked with a surface adjustment, I found the 2x2 drilling to be an equally good remedy.  With this drilling I was reminded very much of the old Danger zone.  The 2x2 started up much quicker than the 4x3, but I was still able to get in around 15 board and get nice hit if I didn't swing it too far.  Definitely a condition ball with this drilling, but very effective if I have a little back end.

I want to thank Ray for comping me this ball in Tucson.
Title: Re: Raging Red Fuze
Post by: BowlingGuy31 on July 12, 2002, 01:34:35 PM
Bought it this past Decemeber or January.  When I first got it, loved the reaction, went down the lane then made a strong arc finish.  Hit like a Brick.  The best ball i had as long there was oil through the heads.  Within 30-40 games, i started to notice a loss of backend and hitting power. I've tried lots of things to fix its reaction, nothing's worked.  it's very over/under now.  It's a great ball if u can keep it in "like new" condition.
Title: Re: Raging Red Fuze
Post by: TheDude on July 20, 2002, 04:37:42 PM
My style is in my profile, and i have used alot of ebonite in the last year or so. I have become tired of the roll of ebonite, and have gone looking for something new and exciting.

The Red Fuze Is that ball, This is without a doubt the strongest pearl ever! Pearl Particle or Reactive, it is the strongest!I haven't changed the cover like alot of reviewers have, i didn't have any problems with over/under.

Ball is drilled simple hook stop. Or 3 3/8 X 2. It is smooth and arcing and has great continous roll right through the pins. Ball has better carry than anything ebonite has, and can match any storm for carry too. The Red Fuze can handle alot more oil than first believed, also i don't use a spareball, and i normally just try to kill the ball's reaction with speed and wrist adjustment. That is almost impossible. I have seen a few tweeners and one cranker use this ball and it was strong for both of them..

First condition, House shot, light though. Lanes are wood, with guardian heads. Strong backends. Ball was flying in the backends, really strong, too strong for this shot, i was standing on the 35, out to the 15, ball breaks on the 3 about 44ft down and just makes a direct turn to the pocket.

Second condition, Sport shot, med( 20 outside, 40 inside) was able to play my most comfortable line, standing on 31, out over the 3rd arrow to the 3or 5 board and back to the pocket. Ball recovered very well on the sport shot, it recovered stronger than my Apex Adrenaline, and everything else in my bag.
I was playing against a storm rep and he was using an X-It and i was having no problems but the rep,(a power tweener with cranker revs like me) struggled all night, switching from his X-it to his response, and never getting comfortable,
End of story beat him, 653 to 533

Last condition. synthetics, house shot, lots of grab in the backend. second shift, with carrydown. ball again recovered where others wouldn't and was strong, and never early rolling.ball is great and almost perfect with the right cover prep and drill pattern. Enjoy!
--------------------
The distance between Insanity and Genius is measured in success.
I thank god everyday that i was not born with the name Steve.
Title: Re: Raging Red Fuze
Post by: Michael on August 02, 2002, 02:44:15 PM
I just recently had this ball give to me! We layed it out 4x4 (3-4 in. pin ended up right beside my ring finger, and cg just below) and put a x-hole below my pap. Polished with ebonite's factory finish. This ball had a get down the lane type of roll to it. I expected raging backends, but it more less rolled through the break for me. Haven't tested it on a sport shot yet, but you can assume that it will be very squirty. This ball flares quite a bit also! I would recommend this ball for a tweener or a powerful stroker. We will continue to give this ball a try. Until next time!

Good Luck and Good Bowling,
Michael
Title: Re: Raging Red Fuze
Post by: TheDude on September 05, 2002, 12:34:06 PM
Got this ball for a regional tournament and it was set up with a simple 4X3 drilling. Hook set normally but this ball reacts so strong on fresh backends you can't tell it has that type of drilling.

Ball Carries better than anything else from brunswick in the past.I use this ball on a heavy house shot that right now has no dry area on the outsides. It is a 42ft crown pattern. Backends are clean and move well. This pattern for me is difficult to find and be able to maintain a line without having to adjust almost constantly. I only had two lines to play, on was standing on the 35, sending the ball out the 25 and it would roll to the 5to 7 and charge back to the pocket. the other line avaible was down and in. this ball can't play down and in. the ball will roll to early and it need to be swung out to sit long enough. This ball is strong plain and simple. If you have a high rev rate. drill this control drilling patterns and not strong becauase the ball will be too much. those with less hand will love this ball cause it will make you feel confident enough to move more left and swing it more.

Overall ball carries very well and it is a strong bench mark ball.


--------------------
The distance between Insanity and Genius is measured in success.
I thank god everyday that i was not born with the name Pchee2 cause then i would be too great to be a simple bowler. I would be a GOD."We're Not Worthy, We're Not Worthy"
Title: Re: Raging Red Fuze
Post by: OLD SCHOOL 23 on September 07, 2002, 08:44:26 PM
JUST A LITTLE REVIEW ON A VERY GOOD BALL FROM BRUNSWICK.ITS THE FIRST BALL OUT OF MY BAG MOST NIGHTS.GETS THROUGH THE HEADS VERY CLEAN AND HITS LIKE A TRUCK,CARRYS THE LIGHT HITS BETTER THEN ALOT OF BALLS. WHEN IT HITS DRY BOARDS IT SNAPS HARD.I GOT IT AT ALMOST THE END OF LAST YEAR AND I'M GLAD I DID...GOT A FEW GAMES ON IT NOW AND ITS MORE EVEN HOOK NOW,WAS A LITTLE SKID-SNAP WHEN I FIRST GOT IT.HAD A 299&754 WITH IT LAST YEAR.HOPE IT WORKS WELL THIS YEAR AND HOPE THE REVIEW HELPED.HAD 711&269 LAST WEEK WITH IT.KEEPS THE PINS LOW AND FLYING.....SO....... "LIGHT ONE UP".......  
Title: Re: Raging Red Fuze
Post by: Da Truth on September 15, 2002, 10:17:18 PM
Weight: 14

I have my Raging Red Fuze drilled with a 4x4 layout. The pin
is under my ring finder. I left the ball in box condition. I tested this
ball on a couple of conditions.

One condition was a 38 foot pattern on wood lanes. The ball cleared the
heads nicely and made a hard snappy backend. I really had to move with the
oil because of the Aggressive Reactive coverstock. On this shot, I played
deep inside around the 22 board and swung the ball to 5. The reaction was
strong and the ball finished hard.

Another condition was the same 38 foot pattern, however the lanes were
Brunswick Pro Anvilane synthetics. I played inside near 25 and swung the ball to the 10 board. It rolled nicely into the pocket, but overreacted if it got
out past 10. I did not have to move as much on the Brunswick synthetics as
with the wood lanes and the other.

The other condition was about 40 feet with less oil around 10 board. The oil
was thick with the surface being wood. I played a little more direct swinging
the ball from about 13 to 4. The ball went long and snapped hard.

I like this ball because it clears the heads and H.I.T.S. However, it
is really sensitive to the oil breaking down, especially on wood lanes.
This ball needs head oil or it will roll out at the breakpoint.
Good ball, I rate it a 9 out of 10!!
Title: Re: Raging Red Fuze
Post by: john_kleist on November 19, 2002, 10:12:15 PM
I am a high speed, high rev bowler.  This ball is a house bowlers dream.  One of the most forgiving balls on a house condition that I have ever thrown.  I have my 16lb Red Fuze drilled up 5 1/4 X 5 which puts the pin right above the ring finger and the CG in the center of the grip.  This ball gets down the lane very well and produces an EXTREMELY angular move to the pocket.  I have never seen a ball flare more than my Red Fuze.  Didn't have very much success on tournament conditions because of how much it flares I would say.  As long as there is a decent amount of oil on the lane this is the ball to throw to generate the most amount of area.  Hooks too much on the dry and not quite enough on the flood.  If you are looking for a great house condition ball this is it.
Title: Re: Raging Red Fuze
Post by: YeahHossNV on November 19, 2002, 10:51:43 PM
This ball has a pin 1-2. It is drilled low track rev leverage with the cg kicked out 45 degrees with a weighthole off the axis. This ball roll extremely early for a pearl cover and on drier lanes burns way too much energy in the heads. On a condition with a fair amount of oil(not heavy) it gets medium length with a strong backend. The ball hits really hard and carries well. I tried to sand it to 1000 but it made it burn way too much energy. The ball is best when polished. This ball is not for everybody. Crankers will find that this ball burns up way to much energy with thier rev rate. This ball is mainly for strokers and tweeners.
Title: Re: Raging Red Fuze
Post by: Michael on November 21, 2002, 09:26:14 PM
Hey guys I quoted in another review of this ball that we would continue to give this ball a try. Well I am continuing up my review of this ball. We redrilled it and put the pin under the ring finger and kicked the cg out about 3 in. from my center of grip. Polished the stew out of it with storm's xtra shine. This ball just didn't roll good for me. On the majority of the house shots here if I get right it hooks out and when I move in to like 21,22,23 it makes the trip to the 1-3 but hits like crap. I saw quite a few of the pros using this layout and thought there might be a message in that, but thought wrong. When I take some the hand out of it and play a little straighter it rolls pretty decent, but nothing special. I would recommend this ball for a stroker, crankers and tweeners look for another ball.
Good Luck and Good Bowling,
Michael
Title: Re: Raging Red Fuze
Post by: BowlersAidProShop-Randy on November 30, 2002, 12:24:29 AM
I drilled this ball 4 and 1/2 with the mass bias kicked towards my axis line (similar to a 4 1/2 by 3 or so)....no weight hole needed.

I was very surprised at how early this ball read the lanes for a pearl reactive ball.  Don't get me wrong it is nowhere near as early reading as a Detonator but it still starts grabbing pretty quick.  This ball has really grown on me after a rocky start.  I have never seen a ball that I can open up a pair of lanes better with.  This is not the ball if you need something for lanes that are hooking a bit.  This ball needs a smidge in the heads to really have a whole lot left for the pins.  If you have noticed the first few weeks of the season on the pba shows many of the pros have been throwing this ball on the shows.  I wouldn't call this the most versatile ball on the planet, but it is definitely a goody for those looking for something to open the lane up when there is a little juice up front.
Title: Re: Raging Red Fuze
Post by: TC Solovic on December 03, 2002, 11:37:32 PM
OK...this ball rules.  Drilled stack with the pin above the ring finger.  I've had it for a month, and it has already gotten me my first 300.  This ball is the ball for anyone who has trouble with leaving ten or seven pins on oily conditions.  At first, I had a problem with unusual leaves if I even just went a little high into the pocket...but after getting a few games on it, the ball plows through anything.  

I have yet to throw it on a genuine sport condition but when I do I will update this.

In essence, this is the best Brunswick ball I've thrown, and is always the ball I throw my first practice shot with.
Title: Re: Raging Red Fuze
Post by: Ryan Peebles on June 07, 2003, 02:16:11 PM
I got a second Raging Red Fuze through a summer have-a-ball league (15#, 3" pin, 2.7 oz. top weight).  Drilled this one low-RG strong:  2 1/2" X 3 1/2" with an X-hole 1 3/4" below the axis point on the vertical axis line.  I kept the box finish on this ball as well...  

The first opportunity to use this Fuze was on a 41-foot Sport shot... doing a little post-league jackpot bowling!  I wanted a little stronger reaction in the wet-dry and carrydown than my Fuze Navy Sparkle (see review).  Again, I want to thank Bill Orlikowski at Brunswick for both ball and drilling suggestions for the patterns and conditions I questioned.

I played a tightrope near the third arrow:  yank it and the ball rolled out early, float it and the ball would hang.  Nevertheless, the early roll and strong, smooth arc make this Raging Red Fuze perfect for the wet-dry.  It does have a stronger backend than the Navy Sparkle with superb mix and carry.  I think the slightly stronger drilling on the Raging Red made it possible!

I won two games (and $75) with scores of 224 and 255... with no washouts, splits, or opens of any kind!  It was definitely better than I expected!
Title: Re: Raging Red Fuze
Post by: Gene J Kanak on June 09, 2003, 02:26:43 PM
Only had this ball for about 2 weeks before trading it, and I never did get it sized correctly. However, from what I saw in that limited time, this is a fine ball. I'm not a fan of big B, as I find most of their stuff rolls up too early and hits fairly soft. However, this ball breaks that mold completely. It can be used on everything from light oil to heavy oil (provided the backends are clean) and the hit is very strong. This is one of those stand left, throw right skid-flip balls that people love to throw. The recovery is fantastic and it carries the corners very well. I would have kept it had I had room in the bag for it. 8.5 out 10.
--------------------
Bowling is without a doubt the dumbest, most pointless, most idiotic excuse for a game that has ever been invented. So, what time are we bowling tomorrow?
Title: Re: Raging Red Fuze
Post by: albertsjj on October 29, 2003, 12:00:22 PM
I love this ball.  Wet or synthetic lanes this is a great ball.  It has a great backend snap which leave the deck swept clear. This is the hardest hit ball I have used. Did have some problems keep in the pocket on dry or wood lanes.
Title: Re: Raging Red Fuze
Post by: Garcia on December 13, 2003, 10:53:16 PM
Drilled - Pin over Middle Finger, Cg kicked out,
X-hole on PAP (6x4.5)
Coverstock - Grey scotchbrite, reshined w/NeoTac #2

This ball is discontinued but I know it was a favorite on Tour. I found a blank and drilled it. Since my Inferno reads so hard in the midlane, it sometimes lacks the backend pop I need sometimes. So I drilled this strong pearl with a high pin to delay its reaction and get the kick on the backend. This ball is very strong, even with the weaker drill it has no sign of squirt on longer patterns. Most longer sport patterns are playable inside of 3rd arrow, this ball is right at home. It holds line easily and has a strong but controllable change of direction. A great Brunswick ball, I know Brad Angelo had much of his success on Tour with it.

Too bad its discontinued, but I know the Inferno would be a suitable replacement with a similar drill pattern.
Title: Re: Raging Red Fuze
Post by: BigJ300 on March 07, 2004, 06:06:51 AM
One of my favorite balls. Works great on medium and medium-dry lanes. Thought it was more aggressive but in fact it is not. Goes very long and comes back with a nice powerful hook!
I averaged 221 over the whole league using only the Fuze AR and a Brunswick Spaceball (I did not need the Spaceball very often but anyways....).
Very versatile ball. Great Job Brunswick!
10 out of 10


Big J
Title: Re: Raging Red Fuze
Post by: dizzyfugu on December 20, 2004, 02:33:25 AM
Hum, seems that it has been some time that somebody took notice of this great ball? Well, once more a lucky shot for me at Ebay . I always had an eye on one of these, and I finally ended up with a used 15 lbs. pin-out Raging Red Fuze from a lefty in very good condition for EUR 50,- (about $ 60,- at the moment), plus plugging, drilling and inserts.

Some Raging Red Fuze balls are (end of 2004) still on sale in Germany, but they are in closeout these days. New balls are available for less than EUR 150,-, and the ball is (update July 2006) still a common sight in league bowling and a favorite ball with serious players.

About me:
Style = Stroker/mild Tweener, right-handed
Speed = 13,5-14,5 mph
PAP = 5" & 7/8"^
Axis tilt = 18,7°
Revs = 250-300 RPM at release
For more details, check out my profile, please.


Ball setup:

To make it a complement to my Trauma (pin-in, drilled for wide arc), my 3 3/4" pin-out Fuze got Brunswick's layout 2L for high-differential balls for a later reaction, just by the book:
Pin from PAP ~4 1/2", pin ended up 1" directly above of ring finger hole. CG placed at 90° from PAP, ending up 3/4" to the right of midlane on the midline. No X-hole necessaery, a urthane thumb slug and silicone finger inserts completed the ball.

=====*===
===o=o===
=========
=====#===
=========
====O====

* = Pin
# = CG


Ball picture: http://www.putfile.com/pic.php?img=3527890

This drilling matches well with the ball's main characteristics and the juiced-up PK 18 pearl coverstock called "Aggressive Reactive": strong midlane recovery, smooth breakpoint, lots of traction on dry boards (especially on a THS) and even in the oil. The core provides a rather early roll tendency, but it is very powerful. All in all, this results in a terrific back end performance on medium-dry to medium-oily conditions.


The testing program

First tests on 30' and 40' left me immediately with very satisfying results between 180-200 pins (I am averaging ~165 at the moment). Due to the strong, rather arcing motion and the almost violent roll of the low-RG core, this ball forced me to move quite deep:

On a 30' pattern with dry backends I had to stand at 25 with the right shoe tip (add 2 boards for left shoe inside), aiming at 12/13th board area, and it moved screaming across the lane into the pocket with thunderous roll and very good carry. And I am just a stroker! Even with my Trauma I rarely have to stand farther than 23rd board on the same conditions, although the Trauma moves differently, with longer skid phase and a sharper backend move. Amazing!

On an oily 40’ sport pattern with no dry outside boards I had to play it fast and straight (Normal hook release was inconsistent), with an end over end release. This worked very well, and pin carry stayed the same as if playing on the easier 30’. Stood at 22, aiming at 3rd arrow, raising speed through a higher starting position. Although I tried to kill the hook, this was not possible. After reaching its breakpoint at about 35’, the ball made a recognizable arcing move to the left (covering 5 boards, I guess), with a good angle into the pocket directly to the 5-pin. And with consistency!


Conclusions

The Raging Red Fuze is a great all-round ball on medium oil. With its tendency to roll due its low RG and great midlane performance, it is ideal for strokers on longer medium oil or short heavy oil patterns with some dry boards at the end: good for big Hollywood hooks and consistently high results. I think it would be difficult to make this a real skid/snap ball. You will need speed and revs to move sharply.

High-rev players will also be able to play the Raging Red Fuze with more oil, since the pearl cover goes cleanly through the heads and saves energy for the back end where it grips like hell and creates a strong move, delivering the core's energy to the pocket. IMHO, crankers should seriously consider a moderate drilling layout, since the Raging Red Fuze might prove uncontrollably strong on dry or broken-down lane conditions.

Lane utility for tested ball (pattern length vs. oil volume):

|S M L
|h e o
|o d n
|r . g
|t
_______
|0 + X| Light volume
|0 X X| Medium volume
|X X 0| Heavy volume

Legend:
X = Best suited with effective control & carry
+ = Fairly suited (works, somehow, but lacks control)
0 = Unsuited (ineffective, either slips or burns up)


The chart concept is borrowed from Storm's 2003 catalogue. Surface prep and drillings may change the results, it is just personal experience with my style

Although Brunswick recognizes this ball in their Ball Comparison Chart to be the same as the Monster Bruiser (M13 position), I consider the Raging Red Fuze from league bowler observations with the Bruiser to be the overall stronger ball. The Aggressive Reactive shell is impressive, even after some years, and the high flare/RG differential adds to the ball's versatility. I think it is quite close to the Original Inferno on comparable conditions, just a touch rollier and generally reacting a bit earlier and smoother. When you play these balls side by side, you will notice the slightly more aggressive reaction shape of the OI.

Pin carry could be better, this is the only critics I can apply so far. Make a flush hit, and it seems as if the pins were imploding with a cracking noise. You will hear "good" pocket hits for sure...
Light hits tend to be left open, and lack of oil can cause burnout and splits.

In direct comparison, my Trauma shows, with its ACCU-Tread pearl coverstock and a similar core, more impact action on a wider range of hits and half-hits. I can confirm this through my friend/bowling pal who has the same pair of balls in his assortment - they show pretty much the same performance characteristics (although they move differently due to style and drilling).
But please do not misunderstand me: the Raging Red Fuze IS a hard hitter! There are simply better benchmarks, even among older balls.

Nevertheless, I give it an overall 8,5 out of 10. I had great expectations, and my Raging Red Fuze fulfilled them from the start, even though newer balls and coverstocks evened this out in the course of the 2 years I own this ball now.

The Raging Red Fuze really IS a strong ball - maybe underestimated by today’s standards, but not out-dated. Even the core lives on in overseas balls like the Dynamic Zone II (with a particle pearl coverstcok), the Majestic Zone II (with a solid PK 22 shell) or the Mega Zone H [re-edited in July 2006>.

If you find one in good shape or even NIB at reasonable price, it is worth having in the arsenal as a main ball for medium conditions. It is also a good Inferno alternative, when you can live with that lightly softer hook shape. It even looks good! Classy style among some modern balls which tend to be a bit intrusive to the eye .

--------------------

DizzyFugu --- Reporting from Germany

"All that we see or seem, is but a dream within a dream..." - Edgar Allen Poe
 
Edited on 26.09.2011 at 7:41 AM
Title: Re: Raging Red Fuze
Post by: Oskuposer on June 22, 2005, 02:21:29 PM
Wow got this ball in a trade with a friend and this ball is really smooth, off the dry.  The layout is this


----o-o
-----*

-----&
-----O

no weight whole the ball goes long and then the break that is makes is a tame arc to the pocket it has a really heavy roll. I used it on a sport shot in league monday night and this ball was the only ball that wouldnt go coast to coast. The shot was a 44 foot patter just like the TOC this year a long pattern with a very little amount of oil and this ball was perfect on it once it hit the dry it just walked right to the pocket.  The only problem that i had with it is that like all Big B balls they hit to hard.  And when it is very dry because then it just rolls out but other than that a good ball.
--------------------
Good bowlers use the big B and when they do they create a Storm
Kiall Hill
A.K.A.
The Chipmunk
"Its a trip 4 fest"
"Thanks Randy"
"Yea but the Brunswick ones get all ten down"
Title: Re: Raging Red Fuze
Post by: LeoAnalyn on August 23, 2006, 12:44:30 PM
This is a very hard hitting ball. I've used it on a 6pm league with a fresh +Medium oil. It has a nice Arc then roll very hard toward the target. I called it Kabooooom!

Updated 11/20/06 Bowled 300 on Medium Light lane.  
Title: Re: Raging Red Fuze
Post by: leftyinhawaii on February 11, 2007, 01:00:15 PM
Pretty happy overall with this ball.  Reacts well in medium to medium/heavy oil.  Can even be used after things dry up a good bit without burning out by just picking up the speed a little.  Handles the mid-lane well, and snaps into the pocket with authority once it hits the dry.  As the lanes I bowl on almost always start flooded I rarely use this ball in the first or even second game.  As it reacts well in third game, I must assume that carry down is not a problem.  The RRF is fairly forgiving when missing inside which is rare trait for any ball, but it also recovers okay when I miss outside...it may not strike but it usually makes it back to the head pin.  The RRF stays remarkably oil free and needs very little maintenance other than just regular cleaning.  I resurfaced it once when the track became very noticeable and the ball handled it well.  It was a touch flat at first but started hooking again after about 10 - 15 throws.  I would highly recommend this ball.
--------------------
I'd rather have a bottle in front of me than a frontal lobotomy.