win a ball from Bowling.com

Author Topic: Drilled up my Ultimate Inferno  (Read 2569 times)

BT808

  • Sr. Member
  • ****
  • Posts: 306
Drilled up my Ultimate Inferno
« on: February 29, 2004, 09:08:07 AM »
I just drilled up my Ultimate Inferno tonight. I only threw it about a game or two. The lanes I believe already had 2 leagues on them, so the shot wasnt really the best to test this ball on. I dont know if it was the drill, the condition of the lanes or what, but I was suprisingly not impressed. I'll post a pic of how its drilled tomorrow, but it doesnt do near as much as I had planned.

I'll give it a couple weeks maybe, it I cant get anything out of it, I might just trade it on here. :/

Edited on 3/1/2004 1:06 AM
-BT
Co-Owner/Operator of 10 Back Pro Shop
Storm Staff
Terre Haute, IN

 

mrepps-24

  • Jr. Member
  • **
  • Posts: 68
Re: Drilled up my Ultimate Inferno
« Reply #1 on: March 01, 2004, 09:08:22 AM »
i drilled mine over the weeeknd too and i didnt get the reaction i was lookin for. it was the end of the night so i think the conditions were fairly dry. the ball would hit the pocket and die or whenever it hit there wasnt thats much pin action. im wondering how can i get that pin action that everyone was talkin about. do i have to polish it if ill be on dryer lanes? will that make a difference. it was very frustrating

mrepps-24

  • Jr. Member
  • **
  • Posts: 68
Re: Drilled up my Ultimate Inferno
« Reply #2 on: March 01, 2004, 09:08:54 AM »
mine was an inferno  . not ultimate. i forgot to put that

Old Coach

  • Full Member
  • ***
  • Posts: 163
Re: Drilled up my Ultimate Inferno
« Reply #3 on: March 01, 2004, 09:18:49 AM »
As Nick is trying to say, this ball needs OIL to perform.  Dry condition and this ball will burn up half way down the lane.

mrepps-24

  • Jr. Member
  • **
  • Posts: 68
Re: Drilled up my Ultimate Inferno
« Reply #4 on: March 01, 2004, 09:27:54 AM »
so what do i need to do to get my ball to perform? what do i do to it?

TheBowlingKid25

  • Hero Member
  • *****
  • Posts: 6133
Re: Drilled up my Ultimate Inferno
« Reply #5 on: March 01, 2004, 09:30:25 AM »
First off, how is it drilled? Second, it could be burning up on the dry, so I would wait to do anything until you have thrown in on a little more oil. If it still is not moving, I would scuff it up to like 800, maybe 600, give that a shot.
--------------------
15 years and still going strong! 15 years old that is! The names Warrior Princess, Xena..Warrior Princess
AM not A CHICK OF BOWLING but I wanted to be in Manda's clique And why would I "saw" pins in half, THATS A WASTE OF PINS! I'd rather blow it over with my storm, and 21mph ball speed on dry shots.

mrepps-24

  • Jr. Member
  • **
  • Posts: 68
Re: Drilled up my Ultimate Inferno
« Reply #6 on: March 01, 2004, 10:53:03 AM »
i dont know the specs on it but i had him to drill it to go long and arc into the pocket. it pretty much does that but it breaks to hard at the end and it seems like it just dies and slows down.

Strider

  • Hero Member
  • *****
  • Posts: 6751
Re: Drilled up my Ultimate Inferno
« Reply #7 on: March 01, 2004, 10:31:34 PM »
quote:
And for those that chose an aggressive layout with this ball.....

WHY?!?!?!?


Ummmmmmmm... Maybe they wanted a ball for oil and don't like particles?

quote:
How does a ball go long and arc?


Pin 5" from PAP, MB in track.  Not that that will turn an Ultimate Inferno into a medium oil ball or anything.
--------------------
Penn State Proud

Strider

  • Hero Member
  • *****
  • Posts: 6751
Re: Drilled up my Ultimate Inferno
« Reply #8 on: March 02, 2004, 02:21:46 PM »
quote:
If a ball goes long, IT IS NOT ARCING! Geez.
--------------------
Nick Smith ... A.K.A. Les Badderâ„¢
Brunswick -=- PBA 03-04


I don't think anyone is taking a modern high end reactive and trying to make it hook like an 80's urethane.  That's the only true arc IMO.  I meant length and arc as opposed to snap.  I was trying to answer what I thought he asked.
--------------------
Penn State Proud

BowlersAidProShop-Wells

  • Sr. Member
  • ****
  • Posts: 343
Re: Drilled up my Ultimate Inferno
« Reply #9 on: March 03, 2004, 12:42:46 AM »
Actually N_Smith, a ball can go long and ARC.  Whoever said swinging the mass into the track was exactly right.  A ball can store energy and not be flippy.  No, it wont as long as a flippier drill pattern, but "long" is a pretty broad term that was used rather loosely in the post.  By drilling it with the mass in the track, it just doesnt unload all at once at the break point, but I'm sure you already knew that.

BowlersAidProShop-Wells

  • Sr. Member
  • ****
  • Posts: 343
Re: Drilled up my Ultimate Inferno
« Reply #10 on: March 03, 2004, 11:42:28 PM »
Then explain that previous post....lol ?

BowlersAidProShop-Wells

  • Sr. Member
  • ****
  • Posts: 343
Re: Drilled up my Ultimate Inferno
« Reply #11 on: March 04, 2004, 01:42:55 AM »
No, lol, I meant the part about not being able to drill a ball to go long and arc...you made it sound as if it didnt exist. And as for the other part, is it POSSIBLE to drill an ultimate to be weak?!? lol