win a ball from Bowling.com

Author Topic: Brunswick Ball for Cheetah  (Read 4641 times)

renoatpikeville

  • Hero Member
  • *****
  • Posts: 753
Brunswick Ball for Cheetah
« on: June 09, 2008, 06:46:56 PM »
Tonight in my PBA Doubles league we bowled on the Cheetah pattern. This is the second year the house has held this league...last year on this pattern I averaged 228 for the two weeks we bowled on it. I've also won on this pattern a few months ago. So I feel confident when we bowl on this pattern.

Usually, I play around 8 at the arrows out to 3-4...up the twig is a no go in our house.

I start out with a clean 196 throwing an Inferno with the pin under my middle finger cg below. It is also at 2000 grit + polish. Good, not great ball reaction so I switch to my red zone with pin above my ring mb in thumb with a flare decreasing hole. Still too much ball.

Game two clean thru the first 6 frames with one strike. finish 142...dismal! Game three 244 throwing a total drilled pin under middle finger cg in palm. Great! Forth game...160 too much ball again!

I did throw a vapor but it gave me more over under than anything in my bag.

Not to go on forever but what is a better choice, the avalanche pearl or a power groove to combat this lane condition. Thinking of drilling either one, pin above middle finger or next to the track. 5.5-6.5' to PAP.

Oh, vitals. Speed 16.5-19+ (on cheetah) 300+rev rate inverted track 4 3/4> 3/8 down. Tilt can vary depending on what release I use.

Your opinions are appreciated.
Thanks for reading!

 

BeansProShop

  • Hero Member
  • *****
  • Posts: 3144
Re: Brunswick Ball for Cheetah
« Reply #16 on: June 12, 2008, 10:51:44 AM »
quote:
Chris....

I would do a Avalanche Solid. Pin under with no hole. That'll be sooooooo money.
--------------------
JG
We're all Livin in a BRUNSWICK World!!!
Bowlers are PFG!!!





On what surface???
--------------------
www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Lane#1 Ball Drilling Expert
Thanks for reading and be sure to check us out at the Lane#1 booth in Albuquerque. Check out current eBay auctions at:
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=bowling_with_leah
Official Pro Shop of "ALL" F.O.S. Members!!!
Looking for a great place to sell your bowling equipment?? Auction style,Fixed Price and FREE For A Limited Time! Try www.bestintheworldauctions.com and to Purchase The "Secret Sauce" visit www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Pro Shop Own

renoatpikeville

  • Hero Member
  • *****
  • Posts: 753
Re: Brunswick Ball for Cheetah
« Reply #17 on: June 12, 2008, 09:36:17 PM »
quote:
Chris....

I would do a Avalanche Solid. Pin under with no hole. That'll be sooooooo money.
--------------------
JG
We're all Livin in a BRUNSWICK World!!!
Bowlers are PFG!!!





Jason,

How are things going? Are you in Albuquerque drilling balls for Big B?


renoatpikeville

  • Hero Member
  • *****
  • Posts: 753
Re: Brunswick Ball for Cheetah
« Reply #18 on: June 12, 2008, 09:40:18 PM »
quote:
the best way to approach this situation is to have an arsenal of equipment. the bowling balls themselves aren't that much different but their surface preparation is vastly different. when i stopped bowling regionals this is what my arsenal looked like:


brunswick bvp mammoth.....always kept it very dull( between 220 grit and 500 grit) great choice for heavily oiled lanes especially on newer brunswick synthetics.

morich awesome hook.....always kept it dull( 500-1,000 abralon ). great for oily lanes

brunswick fury.....usually kept it 4,000 abralon

brunswick total inferno......4,000 abralon plus rough buff

brunswick bvp rampage......4,000 abralon and highly polished

brunswick power groove reactive.....4,000 abralon, rough buff, and highly polished

brunswick target zone.....4,000 abralon, multiple coats of rough buff and polish.


Again, I agree with you. Monday night I brought an aresenal for the pattern but found that all my balls had a tendancy to hook too much. I need a weaker ball for this pattern--which one of Brunswicks' current and upcoming balls would fit under the balls I already have.

Fury>Fury Pearl>Inferno>Red Zone>Total Inf.>Vapor Zone>X>Y>Z.
I also have a Wizard>Ultra Zone>Progres ISM>Inferno #2

sunsetlefty

  • Sr. Member
  • ****
  • Posts: 351
Re: Brunswick Ball for Cheetah
« Reply #19 on: June 12, 2008, 09:56:32 PM »
quote:
All the users around here can do is give suggestions - I hope no one here is REALLY so naive to believe that there was a system "Cheetah = ball XY" (Do we see a pattern here? Elite balls?), even with a specific drilling or surface that would create a winner out of the box. If there was such a solution, I think we would not be here.

As many bowlers you ask, the many (different) opinions you will receive. Even at a pro shop, where a keen eye might observe and your game in real life, such a suggestion would be futile - there are so many factors involved, that the best you can get here are either hints into a certain direction, or experience reports about what worked and what not for a certain player. But you cannot generalize this, just try to puzzle together a vague picture
--------------------
DizzyFugu - Reporting from Germany

Confused by bowling?
Check out BR.com's vault of wisdom: the unofficial FAQ section
Secrets revealed: What's a fugu?



--------------------

My vote for most honest BR post of the year so far.......I would add that the vague picture may become more clear for those that actually are in the know of their own style of game. That's when the comments and suggestions might help....

Gary Palma
X-act Reaction pro shop at Ideal Lanes
PBA Member
2008 Hammer Pride Staff Member

Edited on 6/12/2008 9:59 PM
Owner of X-act Reaction pro shops
www.xactreaction.com
Brunswick and DV8 Advisory Staff
Brunswick VIP Pro Shop
Ebonite International Gold Pro Shop
Rotogrip Star and Militia Pro Shop
Storm VIP Pro Shop
PBA Member
VISE Staff Member

bruns4life

  • Full Member
  • ***
  • Posts: 182
Re: Brunswick Ball for Cheetah
« Reply #20 on: June 12, 2008, 11:27:50 PM »
Not in ABQ......thank god, I heard it sux this year. I would go back to Reno in a heartbeat. Have you made any choices on the ball yet???
--------------------
JG
We're all Livin in a BRUNSWICK World!!!
Bowlers are PFG!!!