BallReviews
Equipment Boards => Brunswick => Topic started by: bigearv14 on March 21, 2006, 04:13:11 PM
-
I just got a Vapor zone and gave it my experimental Sarge Easter drilling. I drilled it pin above bridge, MB right of thumb and OH MY GOSH!!!!
No offense Nick, but i make your hook look like nothing!!!
No, but seriously, my line closely resembled the line on his Smokin' Inferno video, if anybody caught that.
I was playing left gutter to the 2 board at about 21-22 mph!!! Came back at about 48 feet everytime and a couple of times, came in face. I couldn't believe it, so I think I am switching to the Sarge Easter full time, but maybe should drill something a little less aggressive. I'm getting a Punisher soon, and I think I'll lay it out the same way. Hope it works!!
Thanks
Edited on 3/22/2006 2:35 AM
-
Oh...and another thing. My ring finger hurts quite a bit. Any tips on how to prevent this or will my fingers adapt after enough use?
-
quote:
Oh...and another thing. My ring finger hurts quite a bit. Any tips on how to prevent this or will my fingers adapt after enough use?
What's your pitches in the ring and span?
Also, how much bevel are you using?
Sounds like not enough reverse in the ring finger, or too much span.
--------------------
Nick Smith ... A.K.A. Les Badderâ„¢
Brunswick -=- PBA 03-06
http://www.BrunsNick.com
¡Viva la nación de Brunswick!
-
the pitches on both fingers are 0,0. a decent amount of bevel in the ring, was thinking of adding more, but would rather consult someone who throws it more often.
i drilled my actual span on the middle finger and about 7/8" less on the ring finger.
-
When I drilled a Sarge grip, I pitched the ring finger away 3/8ths.
Andrew
--------------------
FUFU
Join us @:
www.bowlingballexchange.com
www.bowlingkingdom.com
www.fullsizechevy.com
www.fitday.com
www.soonersports.com
www.dallascowboys.com
-
ahh, maybe that's the problem!!! i thought about it, but i was afraid i would dump it if it was away.
-
0, 0 in BOTH fingers??
I'm glad you're not an experimental doctor!
--------------------
Nick Smith ... A.K.A. Les Badderâ„¢
Brunswick -=- PBA 03-06
http://www.BrunsNick.com
¡Viva la nación de Brunswick!
-
lol, 0,0 in the MF feels fine, but no one in town throws the SE grip. Me and my friend are the first we know of, so no pro shop owner knew what to do, so we had to even measure it ourselves!!! the span is fine, but i do need to change the pitch.
what do you use nick? 3/8" away sounds good, but just not sure.
-
You also need some right pitch in the ring, go 5/8th right.
For the reverse, if you're around 3 1/2, go 1/4 rev. If you're 3 3/4ish go 3/8th.
--------------------
Nick Smith ... A.K.A. Les Badderâ„¢
Brunswick -=- PBA 03-06
http://www.BrunsNick.com
¡Viva la nación de Brunswick!
-
yeah, i'm about 3 3/4" so i'll try thr 5/8R and 3/8R
thanks for the tip. i think i'll test it on a junker at home, then punch up the punisher. thanks everyone
-
Left gutter to 2 board at 22mph? Either you bowl on the sahara or your rpm rate is well over 600....
--------------------
- Andy
-
quote:
Left gutter to 2 board at 22mph? Either you bowl on the sahara or your rpm rate is well over 600....
--------------------
- Andy
The other more likely option is the Great Wall of CHINA. You'd be amazed what kind of line you can throw if the backends are clean and the outside 5 boards are sandpapered like some house shots.
/hijack off
--------------------
Penn State Proud
Ron Clifton's Bowling Tip Archive (http://"http://www.bowl4fun.com/ron/roncarchive.htm")
-
dont mean to be insulting but you talk about your revrate/ability to hook the ball like your special. your average shows that its really workin for ya. I dont know why but you guys(hook braggers) really get on my nervs.
--------------------
Go MaxBob, Chris Barnes, Tommy Jones, Patric Allen, and Jason Couch!!!!!
--------------------------------------------
bowling is my way of telling pins some times they just need to lay the fu*k down
------------------------------------
ancient chineese proverb:
"I'm not as think as you drunk I am"
Edited on 3/23/2006 5:23 PM
-
dont mean to be insulting but you talk about your revrate/ability to hook the ball like your special. your average shows that its really workin for ya. I dont know why but you guys(hook braggers) really get on my nervs.
Im sorry rofl or is your screen name Monster CRANK... i guess your a meth user
-
can someone tell me wat a sarge easter drill is?
--------------------
I Dont have a mark juss throw the ball in an area BUT I STILL STRIKE
Arsenal: Storm Diablo, Storm Hot Rod Super Sport Pearl, Storm Paradigm(Cracked
), Storm Fired Up,Morich Seek & Destroy
-
quote:
can someone tell me wat a sarge easter drill is?
--------------------
I Dont have a mark juss throw the ball in an area BUT I STILL STRIKE
Arsenal: Storm Diablo, Storm Hot Rod Super Sport Pearl, Storm Paradigm(Cracked
), Storm Fired Up,Morich Seek & Destroy
Go to www.brunsnick.com and look at the arsenal picks.
--------------------
www.bowlingballexchange.com
Saturday Youth League
http://bowlingtracker.no-ip.org:2222/personalstats/ViewStats.asp?PS_LeagueID=6610
-
quote:
dont mean to be insulting but you talk about your revrate/ability to hook the ball like your special. your average shows that its really workin for ya. I dont know why but you guys(hook braggers) really get on my nervs.
Im sorry rofl or is your screen name Monster CRANK... i guess your a meth user
my name is a joke, Im a power tweener at best but I dont bo around wering my revrate as a medal. nor do I go around posting my revrate is so big or well my revrate lets me play 1-1-1 no prob. its all good if you have it but dang you dont need to have a parade about it.
and sarge easter is full finger tip in middle finger and conventional in the ring.
--------------------
Go MaxBob, Chris Barnes, Tommy Jones, Patric Allen, and Jason Couch!!!!!
--------------------------------------------
bowling is my way of telling pins some times they just need to lay the fu*k down
------------------------------------
ancient chineese proverb:
"I'm not as think as you drunk I am"
-
oh my bad
-
I do have an above average rev rate, heck, I'm 20, I'm supposed to aren't I?
Anyway, I have been told that I have a good tilt axis tilt among other things, that allow me to get a ton of hook on the backends, with balls that most people can't get to flinch, whatever that means. Gutter to 5 board at 18-19mph was always easy with the right ball, but the additions of the new drilling and the Vapor Zone made hooking the ball a piece of cake. Normally, I don't care about hook so much, but the carry off the 2 board is amazing. Strong entry angle with high speed...FEAR ME!!!!
