BallReviews
Equipment Boards => Brunswick => Topic started by: xxZonexx on June 20, 2007, 12:06:30 PM
-
Here is what i have so far
My bowling style can best described as Tweener, with 15-16 mph speed and medium revs.I like to play down and in or the out side angle.
Pap= 5" over 1/2 up
Fury - 4 x 4 box finish, Flare increasing X hole Placed 5 inches over and 1" down from pap. The X hole measures 2 inches deep and 3/4"Dia.
Fury2 - 5 x 4.5 pin under 1500 grit sanded no x-hole
Radical - 5 x 4 1/2 box finish no x-hole
Orig inferno - 4 x 4 1/2 pin under no x-hole box surface
My question is what do i need next. I have nothing in the zone line also nothing particle. Any sugestions, i do travle quite a bit and run into a verity of lane condtions. Thanks
--------------------
PennState 2006-2010
Fury 1. 5 1/2 x 5 pin under bridge
Fury 2. 4 x 4 pin up to the right of ring
OI 5 x 5 1/2 Shined
Banshee 6 x 5 2000 Grit
-
Well looking at what you posted you have nothing for light/burnt lane conditions.
Maybe a Power Groove Dry/R or a punisher for the lighter patterns.
--------------------
Bowling up a storm with a punishing hammer.
-
That is a huge gap. He has all high end stuff.
xxZonexx,
What i would do is find a ball like a Rampage which would give you a decent step below without leaving a monster gap in there. Leave the ball box finish and drill the ball 4 1/2 stacked pin up since most of what you have is pin down.
--------------------
Steven Vance
Former Pro Shop Operator
If anyone out there is worried about the scores being too high, try duckpin!!
-
Any other suggestions then the rampage ? Or would that be the best bet
--------------------
PennState 2006-2010
Fury 1. 5 1/2 x 5 pin under bridge
Fury 2. 4 x 4 pin up to the right of ring
OI 5 x 5 1/2 Shined
Banshee 6 x 5 2000 Grit
-
What exactly are you looking for in another ball? You definitely need to go weaker then what you have without leaving a gigantic gap. What is good about the Rampage, is that it is weaker than what you have. It is a pearl to help get through the heads easier than what you have. It is still more controllable than most pearl reactives out there such as a Doom or Smash Time.
--------------------
Steven Vance
Former Pro Shop Operator
If anyone out there is worried about the scores being too high, try duckpin!!
-
Im looking for a weaker ball then all the others, something that will allow me to play on dryer/shorter patterns, also playing outside angles when the shot is there. I had a rampage before it was kind of over/under for me. So you suggest drilling pin 4.5 from axis ?
--------------------
PennState 2006-2010
Fury 1. 5 1/2 x 5 pin under bridge
Fury 2. 4 x 4 pin up to the right of ring
OI 5 x 5 1/2 Shined
Banshee 6 x 5 2000 Grit
-
OKAY!!!! That really narrows it down then. Just adding the "shorter/dryer" helps tremendously as you did not originally say that. If you want to stay Brunswick, just go with a normal Power Groove, not the Dry/R. Put the pin 5 inches from your PAP and no weight hole. This will give you good push through the heads but having a pretty weak core will keep this ball pretty tame on the backend.
--------------------
Steven Vance
Former Pro Shop Operator
If anyone out there is worried about the scores being too high, try duckpin!!
-
ok Great thanks for the input !! much appricated guys
--------------------
PennState 2006-2010
Fury 1. 5 1/2 x 5 pin under bridge
Fury 2. 4 x 4 pin up to the right of ring
OI 5 x 5 1/2 Shined
Banshee 6 x 5 2000 Grit