win a ball from Bowling.com

Author Topic: black u dot surface  (Read 12770 times)

r534me

  • Hero Member
  • *****
  • Posts: 936
black u dot surface
« on: June 03, 2012, 07:15:22 PM »
does anyone know the grit of this thing?. I hit it with 320 grit to get out the scratches and need to finish it up.

thanks

 

StrapperJohnMD

  • Jr. Member
  • **
  • Posts: 95
Re: black u dot surface
« Reply #1 on: June 03, 2012, 08:46:03 PM »
I remember looking this up a few years back, and I'm pretty sure it was 1000.

tommyboy74

  • Hero Member
  • *****
  • Posts: 1826
Re: black u dot surface
« Reply #2 on: June 03, 2012, 09:10:37 PM »
I looked it up a few minutes ago and the majority of people that have reviewed it used 1000 as the finish. 
Current Ball Arsenal
Heavy:
MOTIV Jackal Legacy
MOTIV Mythic Jackal

Med-Heavy:
MOTIV Trident Odyssey
MOTIV Forge Fire
MOTIV Covert Revolt

Medium:
MOTIV VIP ExJ Sigma
MOTIV Sigma Sting
MOTIV Pride Solid

Medium-Light
MOTIV Venom Shock
MOTIV Tribal Fire

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: black u dot surface
« Reply #3 on: June 03, 2012, 09:30:00 PM »
Darn, I was watching this thread because I don't remember. Would have thought it was that old Columbia standby 600 grit US/CAMI (the green Scotch-Brite pad).
"None are so blind as those who will not see."

Urethane Game

  • Hero Member
  • *****
  • Posts: 1304
Re: black u dot surface
« Reply #4 on: June 03, 2012, 10:04:25 PM »
600.  Quite dull out of box.

r534me

  • Hero Member
  • *****
  • Posts: 936
Re: black u dot surface
« Reply #5 on: June 03, 2012, 11:25:24 PM »
600 is pretty dull.  I don't think I have any green pads.  I can hit it with a 500 ab pad and use a gray pad to bring it to 800 to see what it does?  Basically, I need it a step or two below my blue hammer which is around 500.  I tried the blue at 800 and it works better on the fresh 40 feet ths at 500 but not so good when there is a little burn.

Aloarjr810

  • Hero Member
  • *****
  • Posts: 2149
  • Alley Katz Strike!
Re: black u dot surface
« Reply #6 on: June 04, 2012, 07:16:35 AM »
Darn, I was watching this thread because I don't remember. Would have thought it was that old Columbia standby 600 grit US/CAMI (the green Scotch-Brite pad).

I believe your closer to being right at 600 grit charlest for the O.O.B.

The Black U-Dot came out back in the late 80's with a Matte surface (matte or sanded was all they called it), which I think was about a 600 grit wet sand did with a cross hatch pattern at the time.
Aloarjr810
----------
Click For My Grip

Aloarjr810

  • Hero Member
  • *****
  • Posts: 2149
  • Alley Katz Strike!
Re: black u dot surface
« Reply #7 on: June 04, 2012, 07:21:33 AM »
600.  Quite dull out of box.

Back when that ball came out 600 wasnt considered that dull, not when you had balls at coarser grits than that out.
Aloarjr810
----------
Click For My Grip

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: black u dot surface
« Reply #8 on: June 04, 2012, 07:37:37 AM »
600.  Quite dull out of box.

Remember that's 600 grit US/CAMI grading system (old fashioned, black, wet/dry sandpaper) which, in terms of our current sanding reference, Abralon pads, is equivalent to P1200 grit (FEPA grading system). That is not really dull, when balls like the Lane#1 Agent Orange come P500 grit.
"None are so blind as those who will not see."

Urethane Game

  • Hero Member
  • *****
  • Posts: 1304
Re: black u dot surface
« Reply #9 on: June 04, 2012, 09:29:26 AM »
My reference to quite dull refers to using a 600 grit ball on 24 feet of short oil.  Hammers may have been a bit more sanded compared to the U-Dot but still a bunch of surface for short oil.

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: black u dot surface
« Reply #10 on: June 04, 2012, 11:32:04 AM »
My reference to quite dull refers to using a 600 grit ball on 24 feet of short oil.  Hammers may have been a bit more sanded compared to the U-Dot but still a bunch of surface for short oil.

Sorry, I misunderstood. Yes, I agree totally. I'd think that P2000 - P4000 grit might be better, depending on your rev rate and ball speed.
"None are so blind as those who will not see."

r534me

  • Hero Member
  • *****
  • Posts: 936
Re: black u dot surface
« Reply #11 on: June 04, 2012, 06:22:00 PM »
I used my blue hammer on a short ths and I was standing 25 and swinging to 8 at 8-10 at the break and it was barely holding.  I can safely state that 500 grit on a blue hammer does not work well on short patterns on high friction lanes.  I tried up the 2-3 board and it hooked before the arrows!

I ended up having better luck(but not much) with my tropical storm. 

My goal is to use the black u on 40 foot THS when the blue hooks too early. 


kotm

  • Jr. Member
  • **
  • Posts: 54
Re: black u dot surface
« Reply #12 on: June 05, 2012, 05:44:23 AM »
does anyone know the grit of this thing?. I hit it with 320 grit to get out the scratches and need to finish it up.

thanks

a 30 micron sanding pad was the box factory finish.

600 is pretty dull.  I don't think I have any green pads.  I can hit it with a 500 ab pad and use a gray pad to bring it to 800 to see what it does?  Basically, I need it a step or two below my blue hammer which is around 500.  I tried the blue at 800 and it works better on the fresh 40 feet ths at 500 but not so good when there is a little burn.

i would try p1000 and go smoother if necessary.
Good Luck & Good Bowling!

Ron Machniak
www.Precisionbowlingproshop.com

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: black u dot surface
« Reply #13 on: June 05, 2012, 06:39:24 AM »
30 micron is equivalent to P500 FEPA grade or between 320 and 360 grit US/CAMI grade.
"None are so blind as those who will not see."

r534me

  • Hero Member
  • *****
  • Posts: 936
Re: black u dot surface
« Reply #14 on: June 05, 2012, 09:28:15 AM »
Sounds like I will try a 1k pad and go from there.  Thanks everyone.