win a ball from Bowling.com
« previous next »
Pages: [1] 2

Author Topic: Flare Rings and surface prep in certain directions?  (Read 7555 times)

2handedrook12

  • Hero Member
  • *****
  • Posts: 1702
  • Be yourself and keep it simple.
Flare Rings and surface prep in certain directions?
« on: January 26, 2014, 08:54:15 AM »
On some of the reviews about boeling balls, they say stuff about sanding the "back rings" and I also hear about sanding a ball in a different pattern increases friction. How does this work? I am totally lost.
Logged
League: Pitch Purple, Destiny Magenta
Testing: MVP
Interests: Black Widow, Proof Solid, Idol Pearl

 

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: Flare Rings and surface prep in certain directions?
« Reply #1 on: January 26, 2014, 02:21:45 PM »
Sanding the back rings only is not legal in USBC competition, the entire ball must be sanded the same.  Check the link below for information about other sanding techniques.  --  JohnP

http://www.jayhawkbowling.com/Pro_s_Corner/Resurfacing_Tips/resurfacing.html
Logged

J_Mac

  • Hero Member
  • *****
  • Posts: 6778
Re: Flare Rings and surface prep in certain directions?
« Reply #2 on: January 26, 2014, 04:53:37 PM »
One way of legally attempting to mimic the "sanding the back flares only" would be to only use a gel type of ball cleaner in the area of the back flares.  This tip appears on an old bottle of Clean and Dull I have...
Logged

2handedrook12

  • Hero Member
  • *****
  • Posts: 1702
  • Be yourself and keep it simple.
Re: Flare Rings and surface prep in certain directions?
« Reply #3 on: January 26, 2014, 09:14:41 PM »
That's why I am confused. Too many legal issues with that regard. But what about danding in a certain direction?
Logged
League: Pitch Purple, Destiny Magenta
Testing: MVP
Interests: Black Widow, Proof Solid, Idol Pearl

J_Mac

  • Hero Member
  • *****
  • Posts: 6778
Re: Flare Rings and surface prep in certain directions?
« Reply #4 on: January 26, 2014, 09:31:53 PM »
Quote from: 2handedrook12 on January 26, 2014, 09:14:41 PM
That's why I am confused. Too many legal issues with that regard. But what about danding in a certain direction?

I really don't think there is a  reason to continue these  "old school" methods in the modern bowling environment. 

Synthetic lanes are harder than wood, lane oil seem to be "slicker" and there is more of it on the lane because coverstocks are far more aggressive than they ever were in the past.

Keep things simple and easy to repeat...
Logged

Impending Doom

  • Hero Member
  • *****
  • Posts: 6288
Re: Flare Rings and surface prep in certain directions?
« Reply #5 on: January 26, 2014, 10:13:50 PM »
Grit lines perpendicular to the initial track = earlier read in the heads with a smoother back end.
Grit lines parallel to the initial track = less read in the front, with a stronger move in the back.
Crosshatch (both of the methods above) most aggressive overall.

You can also try to put the bow tie of the flare straight up in the spinner and then flip it for a different reaction.
Logged

BallReviews-Removed0385

  • Newbie
  • *
  • Posts: 0
Re: Flare Rings and surface prep in certain directions?
« Reply #6 on: January 27, 2014, 07:20:07 AM »
Quote from: Impending Doom on January 26, 2014, 10:13:50 PM
Grit lines perpendicular to the initial track = earlier read in the heads with a smoother back end.
Grit lines parallel to the initial track = less read in the front, with a stronger move in the back.
Crosshatch (both of the methods above) most aggressive overall.

You can also try to put the bow tie of the flare straight up in the spinner and then flip it for a different reaction.

+1
Logged

Impending Doom

  • Hero Member
  • *****
  • Posts: 6288
Re: Flare Rings and surface prep in certain directions?
« Reply #7 on: January 27, 2014, 07:33:44 AM »
Also, allow me to amend my post. This works most effectively with balls that flare a bunch. The less it flares, the more prevalent the first trait will be, due to the ball not flaring enough to fully exploit the benefit of changing the direction of the sanding lines.
Logged

tc300

  • Hero Member
  • *****
  • Posts: 518
Re: Flare Rings and surface prep in certain directions?
« Reply #8 on: April 07, 2014, 08:00:54 AM »
Quote from: Impending Doom on January 26, 2014, 10:13:50 PM
Grit lines perpendicular to the initial track = earlier read in the heads with a smoother back end.
Grit lines parallel to the initial track = less read in the front, with a stronger move in the back.
Crosshatch (both of the methods above) most aggressive overall.

You can also try to put the bow tie of the flare straight up in the spinner and then flip it for a different reaction.

+2
Logged

kidlost2000

  • Hero Member
  • *****
  • Posts: 5789
Re: Flare Rings and surface prep in certain directions?
« Reply #9 on: April 07, 2014, 07:51:25 PM »
My question in regards to legal or illegal is this, who will enforce it?

Even if you shoot an honor score they typically give the bowler the form to fill out. Look how many balls are found illegal at nationals and given back as is for continued use in legue and tournaments.
Logged
…… you can't  add a physics term to a bowling term and expect it to mean something.

Urethane Game

  • Hero Member
  • *****
  • Posts: 1304
Re: Flare Rings and surface prep in certain directions?
« Reply #10 on: April 08, 2014, 09:08:50 AM »
I've had an Innovative spinner for a couple of years and now I feel more ignorant than ever.  I've been using the method outlined here:  http://www.donkee.com/Images/tippict.jpg

Would this be considered cross hatch?
Logged

kidlost2000

  • Hero Member
  • *****
  • Posts: 5789
Re: Flare Rings and surface prep in certain directions?
« Reply #11 on: April 08, 2014, 09:35:15 AM »
Thats my preferred method to use.
Logged
…… you can't  add a physics term to a bowling term and expect it to mean something.

Impending Doom

  • Hero Member
  • *****
  • Posts: 6288
Re: Flare Rings and surface prep in certain directions?
« Reply #12 on: April 08, 2014, 11:48:31 AM »
For me, crosshatch is top, bottom, side, side. I always felt that 6 sides was a bit of overkill.

I need a spinner. My surfaceprep-fu is out of practice.
Logged

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: Flare Rings and surface prep in certain directions?
« Reply #13 on: April 08, 2014, 03:25:54 PM »
Quote from: kidlost2000 on April 07, 2014, 07:51:25 PM
My question in regards to legal or illegal is this, who will enforce it?

Even if you shoot an honor score they typically give the bowler the form to fill out. Look how many balls are found illegal at nationals and given back as is for continued use in legue and tournaments.

Honestly, probably no one.  Things like this have to rely on the honor of the bowler.  --  JohnP
Logged

kidlost2000

  • Hero Member
  • *****
  • Posts: 5789
Re: Flare Rings and surface prep in certain directions?
« Reply #14 on: April 08, 2014, 03:44:54 PM »
That applies to the vast majority pf USBC rules when applied to equipment. Includding unapproved balls.
Logged
…… you can't  add a physics term to a bowling term and expect it to mean something.
Pages: [1] 2
« previous next »