win a ball from Bowling.com
« previous next »
Pages: 1 [2]

Author Topic: scotch brite pad info needed also  (Read 5750 times)

voidkid89

  • Full Member
  • ***
  • Posts: 226
scotch brite pad info needed also
« on: September 20, 2003, 08:33:25 AM »
what coler pad would add more hook??? less??? what do the grits mean. thanks to all who reply.
--------------------
well if you leave a 5 pin it's a strike in germany
Logged

 

Brickguy221

  • Hero Member
  • *****
  • Posts: 9918
Re: scotch brite pad info needed also
« Reply #16 on: September 21, 2003, 10:45:56 PM »
JohnP, you can get a larger variety in 20 per pack of each grit or you can buy a sample kit for $16.95, which I think is a little high, but I bought them anyhow. Go to www.aircraft-tool.com, click on "download ecatalog", then in catalog, click on "3M products," then scroll about half way down the page and you will find them. Let me know if you don't find them. I have an extra sample kit that I might considering selling for the $16.95 they cost me plus shipping if you can't find them. The sample kit consists of:

7440 -- 50 grit - heavy duty pad - Tan/Brown  
7446 - 150 grit - blending pad - Gray
7447 - 400 grit - general purpose pad - Maroon
8447 - 600 grit - production pad - Maroon (different shade of maroon than 7447)
6448 - 800 grit - light duty - Dark Gray
7448 - 1000 grit- ultra fine - Light gray
7445 - 1200 grit- light duty - White

Some of the higher grit pads when rubbed with your fingers, feel coarser then the lower grit pads, but the numbers I have listed is what came off the box they are shipped in.

--------------------
In the old days, they used axes to chop up wood...Nowadays, they use Buzzsaws.
Logged
"Whenever I feel the urge to exercise I lie down until the feeling passes away"

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: scotch brite pad info needed also
« Reply #17 on: September 22, 2003, 02:48:55 PM »
charlest -- One good use for the white pads -- if you have customers that like a drilled thumb instead of an insert, you can cut a square of the white pad about 1 1/2", punch a hole in the middle of it and use it in your butterfly sander (add a small washer on both sides of the square) to make a drilled hole that is as smooth as an insert.  --  JohnP

Brickguy221 -- I can't get the link you posted to work.  I get the "This Page Cannot Be Displayed" message.  Please recheck and repost if there's an error in it.  I've tried deleting the "-"  and adding another one between air and craft and neither worked.  Thanks  --  JohnP
Logged

MI 2 AZ

  • Hero Member
  • *****
  • Posts: 8152
Re: scotch brite pad info needed also
« Reply #18 on: September 22, 2003, 03:17:01 PM »
quote:
Brickguy221 -- I can't get the link you posted to work. I get the "This Page Cannot Be Displayed" message. Please recheck and repost if there's an error in it. I've tried deleting the "-" and adding another one between air and craft and neither worked.



I think you have to remove the comma he accidently put in after the .com

Try this:

http://www.aircraft-tool.com/
--------------------
I am the SGT Schultz of bowling.
Logged
_________________________________________
Six decades of league bowling and still learning.

ABC/USBC Lifetime Member since Aug 1995.

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: scotch brite pad info needed also
« Reply #19 on: September 22, 2003, 05:39:43 PM »
MI 2 AZ -- Thanks, that works.  I didn't notice the comma and didn't try typing the site name.  --  JohnP
Logged

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: scotch brite pad info needed also
« Reply #20 on: September 23, 2003, 04:41:50 PM »
quote:
charlest -- One good use for the white pads -- if you have customers that like a drilled thumb instead of an insert, you can cut a square of the white pad about 1 1/2", punch a hole in the middle of it and use it in your butterfly sander (add a small washer on both sides of the square) to make a drilled hole that is as smooth as an insert.  --  JohnP


Not having sanded any butterflies lately, btu being a little bit of a woodworker, I wonder what you call a "butterfly sander"?

Is it what some call a "Bevel Sander" -
http://www.bowlersparadise.com/shop/bm/tj/index.shtml#bevel-sander ???



--------------------
"Those who do not remember history are doomed to repeat it."
Logged
"None are so blind as those who will not see."
Pages: 1 [2]
« previous next »