win a ball from Bowling.com

Author Topic: Dropping weight, differences in Rg  (Read 11861 times)

lefty50

  • Hero Member
  • *****
  • Posts: 1821
Dropping weight, differences in Rg
« on: June 08, 2021, 02:19:00 AM »
For any given ball, when dropping from say 15 to 14, and in the case where (most balls) have a significantly higher Rg in the lower weight, would you say that it does or does not matter? Is it still the same ball?

 

Bowler19525

  • Hero Member
  • *****
  • Posts: 879
Re: Dropping weight, differences in Rg
« Reply #1 on: June 08, 2021, 07:53:05 AM »
The difference between 15 and 14 is negligible, and is going to be the "same ball". 

The difference between 15 and 12, for example, is a whole different matter.  Some companies are better at engineering their lower weight equipment than others.

3835

  • Hero Member
  • *****
  • Posts: 733
Re: Dropping weight, differences in Rg
« Reply #2 on: June 08, 2021, 08:17:16 AM »
I would disagree with “be the same ball”.

I just dropped from 15 to 14 and drilled up my beloved Hyroad X and IQ Tour Solid and IQ Emerald. The Hyroad has less punch as the diff is lower and the IQs are completely different as the RGs are much higher.

Further - when Marshall Kent was a Storm staffer he had 16# and 15# Hyroads drilled because the RGs and Diffs were so drastically different. It’s essentially 2 completely different balls that aren’t related yet they are.

So - not all are going to be the same or close. Do some research and consult with your pro shop operator as well.


lefty50

  • Hero Member
  • *****
  • Posts: 1821
Re: Dropping weight, differences in Rg
« Reply #3 on: June 08, 2021, 08:25:08 AM »
19525, i think you may have missed the Rg difference part of the question. I agree that 15 vs 14 weight wise have little difference, but the Rg diff is what I suspect will be an issue.
3835, i am both happy and sad to hear your report. It is what I feared. Happy I may be right, sad my favorites might be so adversely affected.

3835

  • Hero Member
  • *****
  • Posts: 733
Re: Dropping weight, differences in Rg
« Reply #4 on: June 08, 2021, 08:29:00 AM »
For me - I also liked the Web Tour Hybrid in 15#. When I dropped to 14 same deal - different reaction. Not bad - but not what I wanted either.

Now for the good part - Obsession Tours are low rg in 14# and are excellent. To me it’s an IQ tour with a Hammer logo. So good I have a couple of them.


CoorZero

  • Hero Member
  • *****
  • Posts: 1245
Re: Dropping weight, differences in Rg
« Reply #5 on: June 08, 2021, 12:20:46 PM »
Yeah, you really have to pay attention to the numbers with 14 lb. equipment. Luckily for those that do throw that weight the Zen is still really, really good. And a solid version is coming out too. That's where I would start with a new aresenal.

Bowler19525

  • Hero Member
  • *****
  • Posts: 879
Re: Dropping weight, differences in Rg
« Reply #6 on: June 08, 2021, 01:04:55 PM »
19525, i think you may have missed the Rg difference part of the question. I agree that 15 vs 14 weight wise have little difference, but the Rg diff is what I suspect will be an issue.
3835, i am both happy and sad to hear your report. It is what I feared. Happy I may be right, sad my favorites might be so adversely affected.

No, I get it.  But when you are talking about 2.49 vs 2.53 that is going to be barely noticeable.  The differential is where you will get burned potentially.  That is why you really need to look at the specs of what you are thinking you want to try in the lower weights.




star

  • Hero Member
  • *****
  • Posts: 823
Re: Dropping weight, differences in Rg
« Reply #7 on: June 09, 2021, 07:40:56 AM »
Be careful about the differential change too, especially in 2 piece balls.

My Honey Badger has a diff of 0.020 in #14 where the #15 was 0.041. Quite a big difference.
Happy go lucky bowler from the UK.
Specs. 430rpm,18mph off hand. 11-12deg Tilt, 50-60 deg Rotation. PAP 5 1/4 by 3/4 up.
                   R.I.P.
Mo Pinel. The Guru.
Larry Matthews “The Bowling Professor”
Sawbones.
Thong Princess.
Thanks for the FUN times.

lefty50

  • Hero Member
  • *****
  • Posts: 1821
Re: Dropping weight, differences in Rg
« Reply #8 on: June 10, 2021, 05:36:41 AM »
Agreed, thanks...

bergman

  • Sr. Member
  • ****
  • Posts: 355
Re: Dropping weight, differences in Rg
« Reply #9 on: June 10, 2021, 03:51:36 PM »
The idea behind the different specs rests with the notion of trying to keep the ball's performance relatively the same, despite the weight variance. 

A heavier ball will necessarily have a lower RG value than its lighter version. This is due to the fact that
more torque needs to be applied to the heavier ball (with the hand) than with its lighter version. It makes it easier to provide "lift" ( or revs) with a 15# ball by lowering its RG . on the other hand, in order to try and replicate the effort to impart the same revs on its 14# version, the RG is raised.  It's a balancing act.
 
To a lesser degree, this principle also applies to the variance in differential as well.  It's easier to impart revs on the lighter weight ball, therefore justifying an increase in its RG, while simultaneously decreasing its differential value. 

milorafferty

  • Hero Member
  • *****
  • Posts: 11152
  • I have a name, therefore no preferred pronouns.
Re: Dropping weight, differences in Rg
« Reply #10 on: June 10, 2021, 10:08:38 PM »
The idea behind the different specs rests with the notion of trying to keep the ball's performance relatively the same, despite the weight variance. 

A heavier ball will necessarily have a lower RG value than its lighter version. This is due to the fact that
more torque needs to be applied to the heavier ball (with the hand) than with its lighter version. It makes it easier to provide "lift" ( or revs) with a 15# ball by lowering its RG . on the other hand, in order to try and replicate the effort to impart the same revs on its 14# version, the RG is raised.  It's a balancing act.
 
To a lesser degree, this principle also applies to the variance in differential as well.  It's easier to impart revs on the lighter weight ball, therefore justifying an increase in its RG, while simultaneously decreasing its differential value. 

So you are saying the difference is intentional?

I've always been under the impression it was due to the density of the core material being the easiest place to change weight in a ball.
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

Bowler19525

  • Hero Member
  • *****
  • Posts: 879
Re: Dropping weight, differences in Rg
« Reply #11 on: June 11, 2021, 08:32:46 AM »
The idea behind the different specs rests with the notion of trying to keep the ball's performance relatively the same, despite the weight variance. 

A heavier ball will necessarily have a lower RG value than its lighter version. This is due to the fact that
more torque needs to be applied to the heavier ball (with the hand) than with its lighter version. It makes it easier to provide "lift" ( or revs) with a 15# ball by lowering its RG . on the other hand, in order to try and replicate the effort to impart the same revs on its 14# version, the RG is raised.  It's a balancing act.
 
To a lesser degree, this principle also applies to the variance in differential as well.  It's easier to impart revs on the lighter weight ball, therefore justifying an increase in its RG, while simultaneously decreasing its differential value. 

So you are saying the difference is intentional?

I've always been under the impression it was due to the density of the core material being the easiest place to change weight in a ball.

+1

The difference in specs is definitely related to the density of the core. Since the coverstock and filler material (especially in 3-piece balls) has a certain weight, the manufacturers have no option but to make the cores in the lighter weights less dense to reduce overall ball weight.

In the case of 2-piece balls like the Storm Hy-road, it would be surprising if the 12 and 13# versions are actually 2-piece balls.  I would bet that the 14-16# Hy-roads are 2-piece balls, and the 12-13# are 3-piece since they have the same RG&Diff as Storm's other 3-piece 12-13# symmetrical balls.

bergman

  • Sr. Member
  • ****
  • Posts: 355
Re: Dropping weight, differences in Rg
« Reply #12 on: June 16, 2021, 11:11:45 AM »
I think the main question was, why is the RG increased in a lighter version of the same make of ball.  A higher Rg ball requires more effort to rev than one with a lower RG.

First, RG is defined as the distance from a ball's axis of rotation to a point where the total mass of the ball is actually concentrated. For a sphere of uniform density, the total mass is concentrated right at the geometric center of the sphere. For a bowling ball, its total mass can be shifted away ( and more towards its shell) in several ways.

One way is to just decrease the the mass of the core. This will shift the center of mass towards the shell, increasing RG. In reality, there are a number of ways to increase RG. Decreasing the ball's core mass ( but not necessarily its density) is one way. RG increases, the farther away the ball's mass is shifted from its geometric center. For those of you who are interested in the "math", the GENERAL formula for calculating RG is :

  K (RG) = ( the square root of 2/5) X (the radius)

If a 14# ball had the same RG as its 15 # version, its performance would not be quite the same. In order to TRY and replicate the amount of torque applied by the hand in a 15 # ball  v a 14# ball, it becomes necessary to raise the RG value in the 14-pounder. 




lefty50

  • Hero Member
  • *****
  • Posts: 1821
Re: Dropping weight, differences in Rg
« Reply #13 on: June 18, 2021, 09:01:04 AM »
Hmmm. Thanks Bergman, you are correct in the intent of the original question. I can see several problems with this if it is the answer, but it is logical. I can also see why it "might" mean my favorite ball will no longer be my favorite....

bowling_rebel

  • Full Member
  • ***
  • Posts: 159
Re: Dropping weight, differences in Rg
« Reply #14 on: June 18, 2021, 11:29:28 PM »
There are some exceptions, such as the Purple Hammer in 16 lbs with a .03 diff compared to the .015 and .013 in 15 and 14 lbs,

But in most cases is the small change in numbers really going to matter? Of all the variables to worry about.