win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Custom Thumbs....what material do you use?  (Read 2571 times)

chadsproshop

  • Jr. Member
  • **
  • Posts: 56
Custom Thumbs....what material do you use?
« on: April 25, 2006, 05:28:38 AM »
This is to anyone using Custom Thumb or Vise's system for thumb molds.
What material are you using to make the inserts...I am using Ultimates Wizard Quick Plug, it works very well as far as hardness but the all around feel can be a little tacky compared to conventional urethane slugs.  Just curious what you all are using and how you like it.

Thanks
--------------------
owner/chads pro shop
storm amateur staff
Logged

 

TheDude

  • Hero Member
  • *****
  • Posts: 3170
Re: Custom Thumbs....what material do you use?
« Reply #1 on: April 25, 2006, 01:49:23 PM »
We use the Wizard too, no problems always comes out smooth and easy to cut when we have to. I use the mold for myself and about 20 customers. I have even made Slugs from just wizard using the molding cylinder. The Slugs came out great. They were softer and using fine sandpaper they are really easy to make smooth.
--------------------
Timothy @Juniors Pro-Shop
Staff Writer 7-10 Split Magazine,EGO Communications
Montreal, Quebec.
Logged
Timothy @Juniors Pro-Shops
LaSalle, Quebec-Located inside Pont Mercier Lanes.
Keep them honest!

Ebay store updated very often: http://stores.ebay.com/gumby3170?refid+store

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Custom Thumbs....what material do you use?
« Reply #2 on: April 25, 2006, 02:04:38 PM »
Custom Thumb material...I order from the proshop at Alamo Bowl in Orlando Fla.

Great stuff!  Always predictable.

REgards,

Luckylefty
--------------------
Open the door...see what's possible...and just walk right on through...that's how easy success feels..
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

Slick300

  • Full Member
  • ***
  • Posts: 227
Re: Custom Thumbs....what material do you use?
« Reply #3 on: April 25, 2006, 08:07:36 PM »
I use vice products to make custom thumb molds and it works great
--------------------
Ray Lathrop
Bsuproshops.com
Track Advisory Staff
Logged
Raymond Lathrop
Better Bowling Concepts

TheDude

  • Hero Member
  • *****
  • Posts: 3170
Re: Custom Thumbs....what material do you use?
« Reply #4 on: April 26, 2006, 01:32:09 AM »
has anyone used the actual plugging that came with the kit?
--------------------
Timothy @Juniors Pro-Shop
Staff Writer 7-10 Split Magazine,EGO Communications
Montreal, Quebec.
Logged
Timothy @Juniors Pro-Shops
LaSalle, Quebec-Located inside Pont Mercier Lanes.
Keep them honest!

Ebay store updated very often: http://stores.ebay.com/gumby3170?refid+store

BrunsNick

  • Brunswick Rep
  • Hero Member
  • *
  • Posts: 7306
Re: Custom Thumbs....what material do you use?
« Reply #5 on: April 26, 2006, 02:05:18 AM »
I use Ultimate Wizard Plug.

Best stuff on the market for making molds!
--------------------
Nick Smith ... A.K.A. Les Badderâ„¢
Brunswick -=- PBA 03-06
http://www.BrunsNick.com
¡Viva la nación de Brunswick!
Logged
Nick Smith
Digital Media Manager - Brunswick Bowling
http://www.brunswickbowling.com
http://www.youtube.com/c/brunsnick

BrunsNick

  • Brunswick Rep
  • Hero Member
  • *
  • Posts: 7306
Re: Custom Thumbs....what material do you use?
« Reply #6 on: April 26, 2006, 02:06:35 AM »
quote:
has anyone used the actual plugging that came with the kit?
--------------------
Timothy @Juniors Pro-Shop
Staff Writer 7-10 Split Magazine,EGO Communications
Montreal, Quebec.


VISE plug was crud for me, a little too soft. Sometimes, the mix didn't harden enough.
--------------------
Nick Smith ... A.K.A. Les Badderâ„¢
Brunswick -=- PBA 03-06
http://www.BrunsNick.com
¡Viva la nación de Brunswick!
Logged
Nick Smith
Digital Media Manager - Brunswick Bowling
http://www.brunswickbowling.com
http://www.youtube.com/c/brunsnick

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Custom Thumbs....what material do you use?
« Reply #7 on: April 26, 2006, 02:36:36 AM »
I use the Brand...Custom thumb!

REgards,

Luckylefty
PS I had same problems with Vise that BrunsNick had...hey where did you get yours.....I wonder...same batch?
--------------------
Open the door...see what's possible...and just walk right on through...that's how easy success feels..
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

BrunsNick

  • Brunswick Rep
  • Hero Member
  • *
  • Posts: 7306
Re: Custom Thumbs....what material do you use?
« Reply #8 on: April 26, 2006, 02:39:33 AM »
Dunno... I order direct thru VISE.

Maybe a bad batch, but I'm not paying 80 bucks for something iffy! Ultimate RULES!
--------------------
Nick Smith ... A.K.A. Les Badderâ„¢
Brunswick -=- PBA 03-06
http://www.BrunsNick.com
¡Viva la nación de Brunswick!
Logged
Nick Smith
Digital Media Manager - Brunswick Bowling
http://www.brunswickbowling.com
http://www.youtube.com/c/brunsnick

chadsproshop

  • Jr. Member
  • **
  • Posts: 56
Re: Custom Thumbs....what material do you use?
« Reply #9 on: April 26, 2006, 01:00:11 PM »
Lucky Lefty....have you used wizard, in comparison of the two as to what you like the best about the Custom material?  It seems that most everyone prefers the wizard im already using but I wouldnt mind trying something diffrent.  Is it sold through distributors at all?

thanks
--------------------
owner/chads pro shop
storm amateur staff
Logged

TheDude

  • Hero Member
  • *****
  • Posts: 3170
Re: Custom Thumbs....what material do you use?
« Reply #10 on: April 26, 2006, 03:52:02 PM »
I read the instructions about the plugging that came with the custom thumb system and still didn't understand how the hell to measure it out right. it's a 1 to 1 mix but it doesn't come with a measuring cup or anything.
--------------------
Timothy @Juniors Pro-Shop
Staff Writer 7-10 Split Magazine,EGO Communications
Montreal, Quebec.
Logged
Timothy @Juniors Pro-Shops
LaSalle, Quebec-Located inside Pont Mercier Lanes.
Keep them honest!

Ebay store updated very often: http://stores.ebay.com/gumby3170?refid+store

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: Custom Thumbs....what material do you use?
« Reply #11 on: April 26, 2006, 05:21:16 PM »
TheDude -- As long as it's a one to one mix, you can use any volume as long as you use the same volume of each component.  Go to WalMart and buy a set of metal measuring spoons for around $1.00.  Then use one tablespoon of each, or two tablespoons of each, or one 1/2 tablespoon of each, etc.  But be sure the correct mix is one volume to one volume.  If it's one pump stroke to one pump stroke, the two pumps may be set up to give different volumes, such as three to one for one pump stroke of each.  --  JohnP
Logged

CORDOG

  • Sr. Member
  • ****
  • Posts: 364
Re: Custom Thumbs....what material do you use?
« Reply #12 on: April 26, 2006, 06:02:16 PM »
yeah, but they could at least give you a goddam cup!!
--------------------
The Cyrness: Member -Fellowship of The Saws
Owner- Limestone Bowling Supply
Logged

azguy

  • Hero Member
  • *****
  • Posts: 8364
Re: Custom Thumbs....what material do you use?
« Reply #13 on: April 26, 2006, 06:59:12 PM »
I may be out of line here, never used this stuff, but on the lines of something to measure it with, again, I've never used it, but IF you have a nice Wal Mart Pharmacy, ask for child's measuring tube, it's 7 ml, has a scoop easy to read. I work there, I get those all the time for paints etc. I'm sure they'll give you a couple.

If I don't understand what you guys are doing, I'll shut up. But those are some great measuring devices, and they are FREE !!! Hard to beat , FREE !
--------------------
AZ Guy aka: R & L Bowlers Pro
rlbowlerspro@cox.net
www.rlbowlerspro.com

Logged

BowlerKidR

  • Hero Member
  • *****
  • Posts: 2024
Re: Custom Thumbs....what material do you use?
« Reply #14 on: April 26, 2006, 07:52:12 PM »
We also use Ultimate Wizard most of the time. We also at one point had a plug that was made locally by someone that we know at the shop which had the most smooth feel ive ever seen for a thumb hole. Too bad it was over priced.
--------------------
"Strike for show, spare for dough"
I LIKE TO BOWL
Im A Hammer Head 100%
Logged
Pages: [1]
« previous next »