BallReviews

Equipment Boards => Dyno-Thane => Topic started by: Sir Bowl-A-Lot on July 27, 2004, 08:12:44 AM

Title: Good choice for shorter patterns/drier conditions?
Post by: Sir Bowl-A-Lot on July 27, 2004, 08:12:44 AM
What Dyno-Thane would be best suited for shorter oil patterns/drier conditions with no carrydown?  I just want something that clears the heads better and isn't as aggressive as my VP & VPP.

Any ideas?
--------------------
*Don't swing it if you can't bring it.*
Title: Re: Good choice for shorter patterns/drier conditions?
Post by: TheBowlingKid25 on July 27, 2004, 11:13:43 PM
Thing Returns. Long and strong man.
--------------------
16 years and still going strong! 16 years old that is! The names Warrior Princess, Xena..Warrior Princess
And why would I "saw" pins in half, THATS A WASTE OF PINS!
Title: Re: Good choice for shorter patterns/drier conditions?
Post by: a_ak57 on July 27, 2004, 11:22:24 PM
Well, if he's gonna get that, he'll have to not drill it too strong, since it's already a strong ball.
--------------------
-Andy
Title: Re: Good choice for shorter patterns/drier conditions?
Post by: WSUstroker on July 27, 2004, 11:24:16 PM
The TR isn't a bad ball for drier stuff, but some would argue that the Crisis will fit that bill a little better, the TR might be too much on real dry conditions.
--------------------
Dan Chambers
Winona State University Bowling
Title: Re: Good choice for shorter patterns/drier conditions?
Post by: Sir Bowl-A-Lot on July 27, 2004, 11:27:44 PM
I had The Thing Returns and that som of a beeyatch hooked a ton!  Seriously.  I've also had the Anomaly and The Thing.  All very good bowling balls but they cannot seem to handle the drier/shorter stuff.  Since I only bowl in one house and the shot was always around 41 or 42 feet (until recently) I didn't think I needed a ball for this gawd awful mess they got goin' on now!  They shortened the pattern and are using less volume and as a result, tonight was my 3rd consecutive week under 600.  Before they screwed with the shot, I went almost 20 consecutive weeks over 600.
--------------------
*Don't swing it if you can't bring it.*

Edited on 7/27/2004 11:29 PM
Title: Re: Good choice for shorter patterns/drier conditions?
Post by: jimensminger on July 28, 2004, 08:58:43 AM
I like the Crisis, polished, and drilled mine with the pin over the bridge, and the cg about a 1/2 right of the center of the span...I think that the new Vendetta Pearl may also work on this condition, with the same type drill, and a little sheen,..although I haven't drilled one for that type condition yet..
--------------------
www.dynothane.com
Title: Re: Good choice for shorter patterns/drier conditions?
Post by: Sir Bowl-A-Lot on July 28, 2004, 11:29:06 AM
Would the Barrage be a good choice?
--------------------
*Don't swing it if you can't bring it.*
Title: Re: Good choice for shorter patterns/drier conditions?
Post by: jimensminger on July 28, 2004, 11:53:26 AM
I believe in being honest, and even though I'm a D/T staffer, I'm not a fan of the Barrage. All balls are not built for all bowlers, and I can't get the Barrage to hit like I can a Crisis polished. The Barrage will play great on dry surfaces, and I can hit the pocket, but I sure get a lot of 9 counts...I don't seem to match up well with the Barrage...jim
--------------------
www.dynothane.com
Title: Re: Good choice for shorter patterns/drier conditions?
Post by: Sir Bowl-A-Lot on July 28, 2004, 01:15:43 PM
Thanks, now I just need to decide between the new Vendetta Reactive Pearl and the Crisis...

What is the box finish on a Crisis?  The Dyno-thane website says the Crisis is a 2000 grit polished pearl.  Is that correct?  Is it really a polished pearl ball out of the box?
--------------------
*Don't swing it if you can't bring it.*

Edited on 7/28/2004 1:13 PM
Title: Re: Good choice for shorter patterns/drier conditions?
Post by: charlest on July 28, 2004, 01:53:05 PM
quote:
What is the box finish on a Crisis?  The Dyno-thane website says the Crisis is a 2000 grit polished pearl.  Is that correct?  Is it really a polished pearl ball out of the box?
--------------------


I think that may be a misprint. If it's the same as the original Crisis, it is a highly polished solid. I believe DT is thinking about bringing out a pearl Crisis.

The Vendetta Pearl will probably go slightly longer than the Crisis, with a more pronounced backend, if both are drilled similarly. The Vendetta core is stronger from the point of view of RG and differential. That said, I am inclined to believe that they may be able to handle similar amounts of oil, with the Vendetta having the potential to handle more thru stronger drillings plus the potential to have more of a skid/flip ball reaction.


--------------------
"We get old too fast, and too late, smart."