win a ball from Bowling.com

Author Topic: What's wrong with my Anomaly?(LONG!)  (Read 4329 times)

DP3

  • Hero Member
  • *****
  • Posts: 6093
What's wrong with my Anomaly?(LONG!)
« on: October 27, 2004, 05:21:58 AM »
Ok I've been waiting and waiting before I finally brought this to the attention of you guys but someone here has to have some sort of reasoning behind this.  I recieved the Anomaly about a month ago, fully plugged with about 5 games on it.  I redrilled it in the same spot.  The pin(3") is at 1 o clock in relation to the ring finger, c.g stacked.  It comes out to be about a 5 x 4 drill with my PAP coordinates.  It did not need a weighthole, static weights were 1/2oz pos finger, 1/2oz pos side.  I also nothiced that this Anomaly looks very different from other ones I've seen.  I know swiriling patterns vary from ball to ball but this one has a ton of bright blue, almost sky blue swirls.

Here's my problem.  Out of the box surface in 4 different houses, the ball would never pick up into a roll.  Since the contrasting colors make the ball easy to read when it starts flaring I would notice that the color pattern would stay the same the whole way down the lane and would give me about 1/2" of flare on a fresh condition in every house.  I took the surface down and noticed a little bit of midlane movement in two of the houses, but no continuation causing extremely flat and weak hits and alot of deflection.  I then began to think maybe this is the hook monster everyone is claiming it to be and there's just not enough head oil.  So I did a deep cleaning and polished it up with Ebonite Extender polish.  To my suprise the ball gave me a little more movement but still not much more.  About 3-4 more feet down the lane and maybe 2-3 boards more hook overall, but still no flare.  So I threw the balls side by side in two more different houses matched up with a Big Blue Pearl, Preadator Sparkle, Killer Instinct Pearl, 2 Different drilled Hot Wires with different surface preps, and a Columbia Drive.  The Anomaly still wouldn't catch a roll or flare and was 4-5 boards weaker than the weakest ball which is a 5 1/2 x 5 drilled Hot Wire with 2000 polish.  Just to make sure it wasn't burning up again, I tried it on a PBA Pattern B shot 41 feet of long oil....even less ball.

I finally got on a tournament condition last week with screaming backends and a severe dry bounce outside of the 7 board and luckily I had this ball with me.  It still never hooked a total of more than 5-7 boards, but it kept me in play and in the pocket while people were throwing high rg, low dynamic equipment and hooking the lane with it.  The problem was the super weak carry.  It was almost like I was throwing a 13lb plastic ball with a pancake block.  The only reason I kept using the ball was that it kept me in play to the pocket and didn't overreact.  So in the 6 game block on Saturday I avged 183 with a total of 14 back row taps, 2 pocket 8-10s, and 2 5pins.  In the Sunday block I stayed with the same ball, Averaged 198, left 12 tenpins, 3 8 pins, a 5 pin, and no pocket splits.  I made all of my tenpins on the weekend except for 1 but boy did it get tiring shooting them when I know I absolutely labeled the shot.

So, do I just have a bad ball or should I try another plug and redrill or what?  I'm at my wit's end with this thing and I don't know what to do.  I've seen other Anomalys run circles around this ball and everything else that I have that should be hooking much less is making this ball look like plastic.  I am not rev challenged either, about 16.4mph at the pin deck, 350rpms, pap 4 11/16ths over, 1/8th down.
--------------------
-DP3

 

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: What's wrong with my Anomaly?(LONG!)
« Reply #16 on: October 31, 2004, 08:11:28 AM »
For those of you who got rid of their ball with less than 25 games on it, did almost everyone who hated their Anomaly forget to read the Dyno-Thane posts here?

The Soaker coverstock needs 15-25 games to break-in. Thereafter, it should live for 200+ games, as near as I can tell. Some still have not found the end life of this coverstock. Please do not ask for an explanation of why it needs break-in. Unless your are both a plastics chemical engineer and a bowler with the necessary test equipment, it just is. Why ask why?

Also did you try alternative drillings? We often make assumptions about a ball before all the test results are in.

I am not saying there wasn't a bad run, but until you try several options, which some of you seem to have done, it hard to say a ball is "bad".
--------------------
"When we choose an action,
we also choose the consequences of that action.


Edited on 10/31/2004 9:16 AM
"None are so blind as those who will not see."

Hammer3003

  • Sr. Member
  • ****
  • Posts: 474
Re: What's wrong with my Anomaly?(LONG!)
« Reply #17 on: October 31, 2004, 09:51:36 AM »
For me the 1 o clock drill just gives me a skid hook die. There is a driller in town how loves to put that drill on peoples balls. That drill will have tamed the ball a lot. Then if you put extender polish on it all that is going to do is make it go farther down the lane before it checks up.

What I would do is plug it and give your self like a 10:30 look. Here is what I would suggest you do. Drill the ball with the pin above the bridge and cg kicked out (under ring finger) on the Grip line. I have a shock zone I had to shine up with extender polish and can not tame it on most shots. The only shots that tamed it on was on 50-55ft flate patterns. I could still play 10 out to 5 and still got great angle for carry. Blasted a tournament with this ball (I was 300 pins up on second place on a 12 game sweeper).
--------------------
Bowl To Win!!!

Ric Clint

  • Hero Member
  • *****
  • Posts: 1681
Re: What's wrong with my Anomaly?(LONG!)
« Reply #18 on: November 01, 2004, 03:06:21 AM »
quote:
For those of you who got rid of their ball with less than 25 games on it, did almost everyone who hated their Anomaly forget to read the Dyno-Thane posts here?

The Soaker coverstock needs 15-25 games to break-in. Thereafter, it should live for 200+ games, as near as I can tell. Some still have not found the end life of this coverstock. Please do not ask for an explanation of why it needs break-in. Unless your are both a plastics chemical engineer and a bowler with the necessary test equipment, it just is. Why ask why?


All I can say, is if the SOAKER balls need that 15-25 game break in time before they start getting stronger... then my Thing Lives is gonna be so strong that it will hook on 60 feet of oil... SERIOUSLY!!! It's strong now... and if it gets stronger... oh honey, I'm gonna like this ball!!!





Edited on 11/1/2004 4:10 AM

russdog

  • Jr. Member
  • **
  • Posts: 89
Re: What's wrong with my Anomaly?(LONG!)
« Reply #19 on: November 01, 2004, 02:37:05 PM »
I'm having a very similar experience with my Anomaly.  It never seems to pick up a roll and doesn't really hook much on the slick pattern I bought it for.  It has a 3 3/8 X 3 3/8 drilling and is in close to out of the box surface.  I think it has more than 25 games, but I'm not certain - I bought it used and the guy had only had it a few weeks.  I was considering polishing it tonight and trying it out, and if that didn't work, was going to a drastically different drilling.  After reading this post, I might just cut my losses and try to unload it.

I have an Element and love it, and it covers more boards than the Anomaly on every type of condition I can find.  If I decide to redrill and it makes a big difference, I'll let you know.

Jeromie

jchosea

  • Jr. Member
  • **
  • Posts: 31
Re: What's wrong with my Anomaly?(LONG!)
« Reply #20 on: November 01, 2004, 03:50:30 PM »
For what it's worth I have an Anomoly that won't hook either. I probably do the same thing I did  with my X-Factor. Plug it up and put the pin above the fingers and drill the thumb in the Anomoly logo. It worked on the X-factor and didn't even have to use a balance hole.

DP3

  • Hero Member
  • *****
  • Posts: 6093
Re: What's wrong with my Anomaly?(LONG!)
« Reply #21 on: November 01, 2004, 04:24:17 PM »
I've put out the "conditions" myself just to see if this ball works on what it was intended to.  As a matter of fact here is a rundown:

5 fresh typical house patterns ranging from 33 feet in length to 40(various lengths in buffing)
4 Sport/Challenge shots(33" heavy volume, 42" CBUSA Intercollegiate Championship shot, 2003 ABC Masters Pattern, 39 foot flat pattern)
3 PBA Patterns(B, E1 and E3)

Same reaction, skid....skid....rollout 5 boards at 50 feet, hit and deflect to the right.  Maybe the bad drilling(with two different drillings tried I'm still puzzled) or maybe there's just a style/drilling clash(I'm still having a hard time figuring this out, as I've experiemented with many different hand positions and releases to try to make this ball do something).  I've even let a teammate throw it who is a very high tracker(PAP 5 1/2 over) with a very high revrate(450range) and this ball inverted his track and his bowtie was in the middle of the bridge and he got no hook at all.

Oh well it seems as if this argument got nowhere, but on the flipside I do have a nice pretty blue/sky blue spareball.
--------------------
-DP3

Phillip Marlowe

  • Hero Member
  • *****
  • Posts: 2554
Re: What's wrong with my Anomaly?(LONG!)
« Reply #22 on: November 01, 2004, 05:02:23 PM »
DP3,
I am not a huge fan of the Anomaly, but I know why -- and I had substantial success with mine, when I used it on the correct conditions -- medium plus oil with strong carrydown.  I will give you my best understanding after throwing the Anomaly, seeing a buddy throw mine (his equipment was stolen and I GAVE him some of mine) and seeing a variety of folks throw this ball.

1.  For the forward roll bowler, this is not a huge hooking ball.  You have to have substantial side roll to get the ball to move.  For the forward roll bowler, it burns up trying to turn over even when it doesn't.  

2.  It is a very good control ball for heavier oil with carrydown.  Still not a huge hooker for forward roll bowlers.

3.  It works better for slower speed players than for higher speed players.

4.  It works better with a 800 grit sand resurface.

5.  It works better after about 30 games.

My favorite Dynothane ball for medium heavy plus house conditions is the original Element, dulled slightly.  The Anomaly was never, for me, a heavy oil ball.  But for slower speed bowlers who have 45 degrees or more of rotational angle, this ball has been a hook monster -- needing substantial polish to keep on the lane.  Why this is so, I cannot say.
--------------------
"I don't mind if you don't like my manners. I don't like them myself. They're pretty bad. I grieve over them on long winter evenings."
"Some men get the world.  Others get ex-hookers and a trip to Arizona."

Sir Bowl-A-Lot

  • Hero Member
  • *****
  • Posts: 2981
Re: What's wrong with my Anomaly?(LONG!)
« Reply #23 on: November 02, 2004, 06:24:50 AM »
I have almost 250 games on my Vendetta Particle Soild and love it so much that I just recently bought another NIB before they discontinue it.  I couldn't bear to bowl with that Anomaly any longer because it was really giving my average a beating.  Also, I refused to sink more money into it to plug and redrill it to see if a different drilling would help.  Besides, my Vendetta Particle with about 150 games on it at the time, hooked about 5 or 6 boards more than my Anomaly and they both had the same drilling.  Are you sure the Soaker cover isn't on the Vendetta line Phil?  Man that ball has held up like you wouldn't believe!
--------------------
*Don't swing it if you can't bring it.*

DP3

  • Hero Member
  • *****
  • Posts: 6093
Re: What's wrong with my Anomaly?(LONG!)
« Reply #24 on: November 02, 2004, 09:29:10 AM »
That helped a bit more, thanks.
--------------------
-DP3

AllAirForceTwice

  • Sr. Member
  • ****
  • Posts: 461
Re: What's wrong with my Anomaly?(LONG!)
« Reply #25 on: November 09, 2004, 08:52:46 AM »
For what it's worth, I agree with Brunwick300... I have a 10:30 drill on mine and it justs arcs like there is no tomorrow... My home house just installed new Murray lane beds and they're a little harder than the AMFs they replaced. There is a more pronounced transition/carry down period. This plays into the strength of the design/coverstock of the ball in my opinion... New Guy, best ball I ever thrown... Just punched up a Thing Lives so after all is said here, this post may be obsolete...
Dave Ingraham, Major, USAF (Ret)

crankncrash

  • Hero Member
  • *****
  • Posts: 967
Re: What's wrong with my Anomaly?(LONG!)
« Reply #26 on: November 13, 2004, 08:28:34 PM »
I don't wanna be mean, but i will confirm that this is bowler error on DP3, I bought the ball when he put it up on the forsale forum. Got a chance to throw it tonight, my hand doesn't fit it very well, so accuracy was an issue. However, I was getting no less than 4 inches of flare, the ball was burning up like he-double-hockey-sticks, but i was getting turn out of it.  If i threw 6th arrow with my feet against the ball return, and kept it in the oil, only letting it out to around the 3rd arrow at the farthest, the ball would pick up roll at about 35ft turn and burn into the 7 pin. The ball was useless on that shot and i can see it burning out big on anything light to medium. This is with it polished! I won't see the light of day with that ball. My Vendetta particle will be in play before it, and I really don't know if I will use this thing at all, unless i see some extreme conditions.. then again i have a tourney in mind for it.  I will have to have the thumb moved so i can throw it perfectly, but from what i see its gonna be a winner on rediculas shots.. If the Thing Lives is more ball then I guess I'm out.. o well. I can't say i'm dissapointed with what i see from the Anomaly.