BallReviews

Equipment Boards => Dyno-Thane => Topic started by: A_P_K on October 25, 2009, 12:58:10 PM

Title: What is the OOB surface of.....
Post by: A_P_K on October 25, 2009, 12:58:10 PM
The Thing Returns...???

After getting it plugged and redrilled my operator managed to sand the top half of the ball dull.  I'd like to bring it back to OOB.
--------------------
The original Pin Krusher


Title: Re: What is the OOB surface of.....
Post by: scotts33 on October 25, 2009, 09:06:56 PM
1000 grit polished Anthony.

http://www.dynothane.com/index.php?option=com_content&task=view&id=29&Itemid=13
--------------------
Scott

Title: Re: What is the OOB surface of.....
Post by: Aloarjr810 on October 25, 2009, 09:07:56 PM
Dyno-Thane site says 1000 grit polished

http://www.dynothane.com/index.php?option=com_content&task=view&id=29&Itemid=13
--------------------
Aloarjr810
----------
Click For My Grip (http://"http://i174.photobucket.com/albums/w89/aloarjr810/bowlingxtras/mygrip.gif")
Title: Re: What is the OOB surface of.....
Post by: charlest on October 25, 2009, 09:11:12 PM
1000 grit FEPA or 1000 grit US/CAMI?
--------------------
"None are so blind as those who will not see."

Edited on 10/25/2009 9:15 PM
Title: Re: What is the OOB surface of.....
Post by: A_P_K on October 25, 2009, 09:16:55 PM
Bah, how did I miss that I only have the site book marked to my favorites.

Thanks for the info,
--------------------
The original Pin Krusher


Title: Re: What is the OOB surface of.....
Post by: LaneHammer20 on October 25, 2009, 11:00:50 PM
I wouldguess 1000 grit us, then polish
--------------------
What is sandbagging???

Title: Re: What is the OOB surface of.....
Post by: scotts33 on October 26, 2009, 03:53:49 AM
I'm with LH20.  Since, the Thing Returns was made before the FEPA grades were used it would be 1000US polished.

Check with newguy to know for sure.

--------------------
Scott

Title: Re: What is the OOB surface of.....
Post by: charlest on October 26, 2009, 08:15:40 AM
quote:
I''''m with LH20.  Since, the Thing Returns was made before the FEPA grades were used it would be 1000US polished.

Check with newguy to know for sure.
--------------------
Scott



I would guess so normally also, EXCEPT I learned that the "1500 grit" to which Track''''s Clean and Smooth finishes balls is FEPA grade and that compound came out a long time before Abralon and long before the Thing Returns was released!!
--------------------
"None are so blind as those who will not see."

Edited on 10/26/2009 8:48 AM
Title: Re: What is the OOB surface of.....
Post by: A_P_K on October 26, 2009, 08:44:11 AM
I'm just going with a light sanding with a gray pad and Resurrection to finish it off.  I like the way it rolls now and don't want it to be much different.  I'll just polish it with Snake Oil afterwards.

For me this is the strangest, earliest rolling pearl I have and I thought the Awakening was early.
--------------------
The original Pin Krusher