win a ball from Bowling.com

Author Topic: OPTYX Formula 1  (Read 13145 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
OPTYX Formula 1
« on: December 31, 1969, 06:00:00 PM »
Specs: Coverstock: Reactive; Finish: Factory Polished; RG: 2.51 (medium low); Differential: .050 (medium high) Flare: High; Length: 5.1; Backend: 12; Hook Potential: 21; Available weights: 14 - 16lbs

 

GJACKSON

  • Jr. Member
  • **
  • Posts: 16
Re: OPTYX Formula 1
« Reply #16 on: February 19, 2002, 11:23:37 PM »
I must start by saying what a night and what an awesome ball!

My Optyx is 1200 grit and polish to 1200.  It's drilled 4x2 (pin over the ring finger)  The lane conditions I bowled on was medium oil 10 to 30 and light 10/30 to the gutter and down to about 38 feet.  I started out standing on 27 placing the ball around 16 and going to 5.  WOW what a backend reaction.

The first game was a 257. The second was an identical, another 257.  The last ball of the second game and the first of the third the ball went a little high but still struck.  I move one board left and there I was back in the pocket.  I finsh the last game with a 248.  Finish the night with a 762!  That my highest yet! (Last September I rolled 755 in the same house with the same ball.)

I can't say enough THANKS EBONITE for your great equipment!  Keep up the good work!

Feel free to email me with your questions at JACKSON4LIFE@MSN.COM

you can only bowl one frame at a time...relax and concentrate on KICKING BUTT!

STORM/ROTOGRIP AND VISE STAFF MEMBER
GIOVANNA JACKSON
GQ BOWLING SERVICES
PROSHOP IN CHARLOTTE, NC

lafbowler

  • Newbie
  • *
  • Posts: 1
Re: OPTYX Formula 1
« Reply #17 on: August 07, 2002, 11:48:08 AM »
I must say I was a little optpmisitc about buying a ball, but this is the best ball I have ever had. I bought the ball last week and used it for the first time in a industry wide tournament in New Orlans, Louisiana. My first series with this ball was 247,237,211. Great back end on the ball. I also wound up bowling my first 300 with this ball in the same weekend. I am very pleased with my purchase. Great ball at a great price.

cursedinvt

  • Jr. Member
  • **
  • Posts: 8
Re: OPTYX Formula 1
« Reply #18 on: August 12, 2002, 02:42:29 PM »
When i first saw this ball advertised i thought that although it had a reactive coverstock it would hook as much a say a gyro because it had a polished clear appearance.  I said what the hell and found one an x-out on ebay and drilled it will the pin under the bridge and cg out 3/4 of an in.  I will tell you this doesn't hook like a gyro at all.  On medium to heavy oil this came back into the pocket from deep with the best in my arsenal, i was suprised.  I also was getting more revs because the x-out was 14lb and i throw 15.  If i had the money i would get the spider or perhaps this 1st quality in 15lb.  This ball is only x-out for problems with the color (white spots along the checkers that aren't supposed to be there) so if anyone dropping weight wants to trade drop me a message.

ACE300Bowler

  • Jr. Member
  • **
  • Posts: 7
Re: OPTYX Formula 1
« Reply #19 on: October 02, 2002, 11:56:18 AM »
This ball i had drilled also as 4x4 with a leverage hole. This was the last ball i expected to have a huge hook.  I came out throwing it 24 swinging out to the five board and coming back like there was no oil on the lane.  Driving hard and not stoping for simple bowling pins, it smashed right trhough them.  This is also one of the only balls that was very consistant through heavy oil. I recomend this ball to anyone who plays a large hook and needs power through the heads.  Great ball!

cocamidoproply

  • Jr. Member
  • **
  • Posts: 11
Re: OPTYX Formula 1
« Reply #20 on: October 19, 2003, 04:53:29 PM »
Had this ball for about a month and a half, and i think it is finally time to post a review on it.

Top weight = ???
Pin = 3 inches
15#'s
Pin is above and right of ring finger, CG directly below, parallel to holes.
THS

This ball fitted the niche in which i had inteded it for perfectly.  A lane condition where my Cold Fusion wasn't enough, and my Assault was too much.

HEADS:  This cover here seems to be weaker than a solid, but stronger than a pearl.  Clears the heads pretty well, but that is also aided on by the high RG core.

MIDLANE:  This is where the ball starts to expend its energy.  Has a great midlane read that hardly ever causes an erratic breakpoint.  Very consistent on where it releases its energy.

BACKEND:  This is where this ball really shines.  When that Matrix core stands up, watch out!  The backend on this ball is absolutely insane!  It easily outbackended an EMB pearl, Messenger Ti BSP, and a Wicked (original).  Just absolutely amazing.

ROLL/HIT:  Again, another strong point.  Every Ebonite i have ever thrown has a very distinctive roll characteristic to it.  Gets into a very stong roll which equates to pin punishing power.  Carries very well, in fact, this is the ball i used to shoot my first 300.

SENSITIVITY:  The ball has a couple of weakpoints that i've noticed.  It seems to be more than sensitive to carrydown.  After about the second game, i have to move farther outside, and sometimes, I have to come up the back of the ball more to aid in geting it into an earlier roll to get it through the carry down.  It also doesn't too well when tugged.  Even on THS, this ball will overpower the oil lane and go Brooklyn.  It also doesn't like to hit low in the pocket, the lower it hits, the more 4,7,and 8 pins i saw.

SUMMARY:  Very good ball so long as you have some head oil to get it to the backend.  Once it gets to the backend, if its on the right side of the lane, it will find the hole.  VERY adaptive to release change.  I can make this a spare ball just as soon as i can make it my strike ball.  Seems to know what you want it to , and then accomplishes it.  When the oil carries down, you either need to play more direct, or find some dry midlane.  Serves as my current benchmark ball.  Reads the oil aptetrn very well, and i can use it with alot of luck in tournaments.
--------------------
Clay

Pink and purple polka-dotted elephants are really cool, but i haven't seen any yet...



I need ignorant people like i need an inoperable tumor at the base of my spine.  


JessN16

  • Hero Member
  • *****
  • Posts: 3716
Re: OPTYX Formula 1
« Reply #21 on: June 28, 2008, 07:59:20 PM »
The ball: 16 pounds, 4-inch pin
The drill: pin above ring, CG under ring, BOMBS Away leaves MB strong, down and just inside the VAL and below right of the thumb. Works out to 3.75 x 3.5 x 4 drill for me. No weight hole. Finish is box.
Me: PAP 4 over 3/8 up, tweener revs, good speed, good circumference coverage

---

I've had this ball since it was a new model but have never used it as my primary piece of equipment. Still, after some recent testing I thought it might be interesting to review this older, unique piece of equipment on today's oils.

For testing, I rolled in on a modified THS that has decent oil volume outside 8. Two lengths were used, 37 and 40 feet.

When I first bought this ball around 2003, I was amazed with its performance given that I thought it was a bit of a gimmick. For those who have never seen one, the outside inch or so of the shell is clear, but reactive. There is debate over whether it's a pearl or a polished solid. Ebonite calls it a polished solid, but its performance characteristics are more like a strong pearl.

What's interesting about this ball's performance is that it is strong, strong, strong. The core is out of the Matrix, strong for its time but now one of Ebonite's weaker offerings. Still, the combination of that core and this cover make for a ball that is a midlane monster, with great continuation off the spot.

It also carries exceptionally well, owing to its strength.

Many people bought this ball thinking it was a dry-lane ball or even for medium-drys, but that is not the case. This ball, even today, needs medium oil to shine, and can actually handle more than that.

Its shortcomings can be summed up thusly: When it stops working, put it up. This is one of the least versatile balls I've thrown. It works great within a very narrow range of conditions, but it doesn't take changes in input well and if you try to force it, you'll be battling over/under all night long.

As for surface changes, I have not tried any. I'm a bit scared that I can't get the surface to come back up to box finish so that the underlying graphics can show through.

Another plus for this ball that I must mention is that it defies, somewhat, Ebonite's reputation for quick ball death. I now have about 60-80 games on this ball and it's performing like new, even though I've done very little maintenance to it.

These balls are very rare but do show up on eBay from time to time and, for some reason, tend to be sold at very low prices. If you can find one, pick it up. Even if you don't use it, it's a great conversation piece. The summary:

Positives: Stronger than you'd think, great on mediums, above-average carry even when compared to current-day offerings.

Negatives: Very narrow range of effectiveness, not a dry-lane piece, not what you want for a benchmark ball.

Overall: For what it does, it does very well. For what it's not designed to do, it won't do at all.

Jess