win a ball from Bowling.com

Author Topic: GB3 pearl woes  (Read 5688 times)

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
GB3 pearl woes
« on: November 11, 2018, 04:41:51 PM »
Anyone put major surface on this ball yet? Something like 1000 grit. This is the most inconsistent ball I have ever thrown. Reads the lane one shot. Next shot, the ball snaps across the face. I’m adjust into it, and the ball hooks more. Or, the ball doesn’t read the lane at all and leaves a bucket. Hoping some surface helps smoooth it out and read better

 

ignitebowling

  • Hero Member
  • *****
  • Posts: 981
Re: GB3 pearl woes
« Reply #1 on: November 11, 2018, 06:50:34 PM »
What's the pin to pap on the ball?
Ignite your game, and set the lanes on fire. www.facebook.com/ignitebowling  or @ignite_bowling

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: GB3 pearl woes
« Reply #2 on: November 11, 2018, 11:43:08 PM »
Idk. Probably about 4-4.5”

Rightycomplex

  • Hero Member
  • *****
  • Posts: 1250
Re: GB3 pearl woes
« Reply #3 on: November 12, 2018, 06:15:01 AM »
sounds like its a bit too squirty for it. try 500/4000 to 1000 itself maybe too early.
James C. Jones
Orbdrillers Pro Shop Holiday Bowl
Chester, Va.

Hammer Regional/Amateur Staff Member

www.facebook.com/orbdrillers
Orbdrillers.com
Hammerbowling.com

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: GB3 pearl woes
« Reply #4 on: November 12, 2018, 10:57:53 AM »
i have already hit the ball with a used 3000 pad, and it was marginally better, if at all

On edit, our shot has not been the easiest. We have dirty back ends with inconsistent oil. This ball magnifies those tendencies more than anything else I have ever seen. I am thinking 1000 may help blend the pattern out
« Last Edit: November 12, 2018, 11:01:22 AM by lilpossum1 »

2handedrook12

  • Hero Member
  • *****
  • Posts: 1702
  • Be yourself and keep it simple.
Re: GB3 pearl woes
« Reply #5 on: November 12, 2018, 12:00:51 PM »
I've seen similar conditions and went through this with my Phenom pearl on them. I took it to a worn 1000 so it's closer to a fresh 2000. It was much better.
League: Pitch Purple, Destiny Magenta
Testing: MVP
Interests: Black Widow, Proof Solid, Idol Pearl

Bowler19525

  • Hero Member
  • *****
  • Posts: 879
Re: GB3 pearl woes
« Reply #6 on: November 12, 2018, 12:40:08 PM »
My GB2 MVP showed similar behavior.  Very inconsistent.  I tried multiple surfaces, and finally gave up on it.  When it read the lane, it was amazing.  Just not consistent enough to keep in the bag as it was impossible to gauge when to use it.

Dave81644

  • Hero Member
  • *****
  • Posts: 1662
Re: GB3 pearl woes
« Reply #7 on: November 12, 2018, 09:22:44 PM »
It just sounds like what I have been seeing, to shiny and it creates over/under hell if you don't release it exactly the same each time. Not super forgiving IMO, but when you have the right matchup for it, it seems to really go through the pins with a ton of energy. The 500/4000 idea may just work for you, I took mine to 3000 + a light polish because mine was just to early for my house shot. And then I got my hands on web tour, youza....the GB3 doesn't even come out of the bag much anymore

Rightycomplex

  • Hero Member
  • *****
  • Posts: 1250
Re: GB3 pearl woes
« Reply #8 on: November 13, 2018, 06:39:02 AM »
i have already hit the ball with a used 3000 pad, and it was marginally better, if at all

On edit, our shot has not been the easiest. We have dirty back ends with inconsistent oil. This ball magnifies those tendencies more than anything else I have ever seen. I am thinking 1000 may help blend the pattern out

a worn 3000 is useless unless you have defined friction. 500 will give you some teeth and the 4000 overlay will get it through the fronts a little better. I have found that I rarely like the out of box finish on polished releases, even on my Rhodman Pearl which is my favorite. I either knock it off with a 2000 pad or hit it with 500/2000 or 4000. practice with it a bit and let the lane shine it up and it will be much better.
James C. Jones
Orbdrillers Pro Shop Holiday Bowl
Chester, Va.

Hammer Regional/Amateur Staff Member

www.facebook.com/orbdrillers
Orbdrillers.com
Hammerbowling.com

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: GB3 pearl woes
« Reply #9 on: November 13, 2018, 06:00:42 PM »
i have already hit the ball with a used 3000 pad, and it was marginally better, if at all

On edit, our shot has not been the easiest. We have dirty back ends with inconsistent oil. This ball magnifies those tendencies more than anything else I have ever seen. I am thinking 1000 may help blend the pattern out

a worn 3000 is useless unless you have defined friction. 500 will give you some teeth and the 4000 overlay will get it through the fronts a little better. I have found that I rarely like the out of box finish on polished releases, even on my Rhodman Pearl which is my favorite. I either knock it off with a 2000 pad or hit it with 500/2000 or 4000. practice with it a bit and let the lane shine it up and it will be much better.

When I say a worn 3000 pad, it wasn’t very worn. I rarely ever use the 3000. I maybe used it 3 or 4 times. It is just what I grabbed to try to knock some shine off. I’ll get some new pads and try the 500/4000 next

thedjs

  • Hero Member
  • *****
  • Posts: 1017
Re: GB3 pearl woes
« Reply #10 on: January 29, 2019, 02:23:31 PM »
i have already hit the ball with a used 3000 pad, and it was marginally better, if at all

On edit, our shot has not been the easiest. We have dirty back ends with inconsistent oil. This ball magnifies those tendencies more than anything else I have ever seen. I am thinking 1000 may help blend the pattern out

a worn 3000 is useless unless you have defined friction. 500 will give you some teeth and the 4000 overlay will get it through the fronts a little better. I have found that I rarely like the out of box finish on polished releases, even on my Rhodman Pearl which is my favorite. I either knock it off with a 2000 pad or hit it with 500/2000 or 4000. practice with it a bit and let the lane shine it up and it will be much better.

When I say a worn 3000 pad, it wasn’t very worn. I rarely ever use the 3000. I maybe used it 3 or 4 times. It is just what I grabbed to try to knock some shine off. I’ll get some new pads and try the 500/4000 next


When you hit on something, please let us know.  I've got one of these and have tried several different surface changes and, so far, nothing works.  I am thinking about taking it to 500/2000 and see if it would be close to the solid version.  At least then I'd have some use for it.

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: GB3 pearl woes
« Reply #11 on: January 29, 2019, 04:27:39 PM »
The ball is now probably my favorite one in my bag. Idk what happened, but it came to life. I used either a 1000 or 2000 pad, either one worn, with polish on top. It is a super hard arc that is predictable, yet carries from steep angles. Cleanish through the fronts still

thedjs

  • Hero Member
  • *****
  • Posts: 1017
Re: GB3 pearl woes
« Reply #12 on: January 30, 2019, 03:31:58 PM »
The ball is now probably my favorite one in my bag. Idk what happened, but it came to life. I used either a 1000 or 2000 pad, either one worn, with polish on top. It is a super hard arc that is predictable, yet carries from steep angles. Cleanish through the fronts still

So you basically took it back to factory (500/1000 Polished) or maybe 2000 with polish. In any event I glad the thing started working.  Now if mine will do the same I'll be ok.

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: GB3 pearl woes
« Reply #13 on: January 31, 2019, 12:21:30 PM »
Exactly. I was about one game away from giving it away too lol. Was on its last hope

Dave81644

  • Hero Member
  • *****
  • Posts: 1662
Re: GB3 pearl woes
« Reply #14 on: January 31, 2019, 08:33:39 PM »
Its amazing what bad ball reaction looks like on THS.
Never thought I would have to "match up"
When its good, its really good, when bad, oh it sucks
I hate having to bowl my tail off to hit my average which is a regular occurrence lately
We seem to be seeing dry fronts and hang downlane all to often
I gave mine away for the very same reasons you described above, however the Rhodman Pearl is a much better piece for me with a little surface