Author Topic: Ok Ebonite staffers need Striking Motion help (Read 7944 times)

mrbowlingnut · « **on:** November 24, 2008, 02:52:25 PM »

Ok got the ball had it punched 4 1/2 pin to and 5 inch mb to pap, threw the ball 2 sets and so far it is pretty straight with not much backend.

I am thinking it needs polish and the cover is burning up, I am able to use a Sauce with same pin to pap on same exact lane conditions.

Btw it has the recommended drilling just thought to add that, pin over ring and mb just right of the thumb.

What have you done different surface wise with this ball than other balls??? Going to call my driller and peck his mind out of his head over this ball, balls seems to look like it going to hook and just makes a funky move and does not hit well.

Btw the Sauce is one of the best balls i have threw in awhile, think of a better Diesel with more pop on the backend. Reminds me of my prized Diesel Particle Pearl from the old days, dang I loved that ball and shot big with it many times.

Ok help me figure out why Eddie would make this his Hi-Po ball, I know you are smart Eddie so help me see what is going on here. Too much surface or needsmore surface which is it???

Edited on 11/25/2008 0:24 AM

batbowler · « **Reply #16 on:** November 28, 2008, 10:16:24 PM »

From the guys that I've seen using this ball, it's the same thing. 1st game on fresh oil is ok not very impressive and the 2nd game it gets worse. I bowled a SASBA tournament and several guys got into trouble with it and one guy went to a Maxxx Zone and shot really good and I ask him why he changed and he said that it couldn't get a good read with it so he put it up. Another guy went to the Complete NV and shot better and the ball seem to read the lane and hit better.
--------------------
"Train a child up in the way he should go and when he is old he will "BOWL UP A STORM AND BE KING OF THEM ALL" and not turn from it."

DP3 · « **Reply #17 on:** November 28, 2008, 10:48:25 PM »

quote:
quote:
This ball grabs extremely early and needs tour like oil volume in the heads and midlane to get up the lane without expending energy. I've seen this ball in the hands of 4 local guys that throw it really well, and it's certainly a big hooking piece front-to-back. I'm not sure what you guys are bowling on or what type of rotation/revrates you have but I've seen this ball look very strong on a heavier volume house shot, Shark on proanvilane and Scorpion on proanvil lane.
--------------------
-DJ Marshall
...The Twelve In a Row Pro Shop. AMF Bowie Lanes -- Bowie, MD

DP3 did you see that this ball is being sold by Buddiesproshop.com for $124.99 online. My distributor told me about this tonite. I see Ebonite's floor pricing policy is working real well. Boy I am sure glad I bought the first 4 at $105. But I will not be reordering any from my distributor at the regular price of $132. Thanks again Ebonite.

Edited on 11/28/2008 11:08 PM

Edited on 11/28/2008 11:25 PM

Yes I did see the pricing, and I did have to pay a double digit number in the low teens higher than buddies price to order the two that I have in stock. I think it's a great ball that alot of bowlers could benefit from, but I'm at the point now where I just don't care. Knowing you're getting BOHICA'ed is just an acceptance now so I just try to sell whatever product I have to keep the lights on and my bills paid. Won't be long for us small guys though to stay around and unfortunately the bowling business is so cut-throat not enough guys will man up and come together to make something happen. They'll just keep staying quiet and struggling until another good shop goes down and they get more customers in the door. All I know is I'm not gonna sit around and starve anymore waiting for that to happen.
--------------------
-DJ Marshall
...The Twelve In a Row Pro Shop. AMF Bowie Lanes -- Bowie, MD

mrbowlingnut · « **Reply #18 on:** November 28, 2008, 11:43:28 PM »

Hey you guys go post the map stuff somewhere else J/K

I shelled down but no dang oil to get anything down the lane, was swinging 4 th arrow plus with anything i had. Added the weight hole will throw it again Sunday Morning, I did hear the higher rev player now has his fixed and likes the ball finally.

He shelled down and went low hole also, so I am hoping it will have increased back end reaction now. I also shelled down an NVD with same exact drilling just for kicks, hated that ball also from too much hook maybe it will burn up front some and smooth it out.

ramimac · « **Reply #19 on:** December 01, 2008, 02:58:52 PM »

During the Demo of the SM I to noticed that it did not move very much my driller then took the ball i was using a put a hole in it around the thumb area and it came alive...

Same driller that had the same massive amount of striking like it did with it one demo day can not get the one in his bag drilled identical to the one he threw at the demo to move...

he believes that is may be a dud as well..

I am leaning towards a momenum swing or a sauce.. will try them both out at the ebonite demo on the 13th.. to go with my red/black Bash and Playmaker.
--------------------
In the Bag
Playmaker 14lb
Bam Blue/Black 14lb

For sale all 15lb
Blast Zone 2000 Sand Heavy Polish
Red XXXL 2000 polish
White Dot
Carbide+ 2nd Drill
Blue Slate gargoyle 2nd Drill
Blue Slate gargoyle 1st Drill
Fury NIB

Viper R.I.P (Cracked all the way arround ball)

Available for trade or sale

Edited on 12/1/2008 4:02 PM

mrbowlingnut · « **Reply #20 on:** December 01, 2008, 04:33:17 PM »

Do yourself a favor and go with a Sauce, cannot go wrong with that ball at all. I have been instructed to put Ebonite Factory finish back on top of the 1k now, backed did pickup but nothing special so far.

I am willing to keep trying surfaces and have came on here seeking other outside help, we will go through the changes and see where it goes.

Btw i have one offer to buy it so far if cannot get the surface correct, i would prefer for Ebonite to just give me another ball if the west coast rep will allow this.

My pro shop has worked closely with me on this not slamming them at all

Jeff has come through time after time helping me so will keep on plugging away or get rid of it somehow some way.

Still think it is a bad batch like your driller has stated to you, I know ball motions and like every other recent ebonite balls in fact have 2 of many of them.

On edit ball is now shiny over 1k will report tomorrow if dog still or now the hi-po ball Ebonite says it is. Trust me I am one of you with medium revs and slightly higher ball speed to revs, I am neither good nor bad as bowler but do consider myself a ball reaction expert.

Warmup tonight here we come if promising it gets used otherwise NOT!!! Bowling against Palumbo the West Coast Visionary Rep for league bragging rights of best team in the league

quote:
During the Demo of the SM I to noticed that it did not move very much my driller then took the ball i was using a put a hole in it around the thumb area and it came alive...

Same driller that had the same massive amount of striking like it did with it one demo day can not get the one in his bag drilled identical to the one he threw at the demo to move...

he believes that is may be a dud as well..

I am leaning towards a momenum swing or a sauce.. will try them both out at the ebonite demo on the 13th.. to go with my red/black Bash and Playmaker.
--------------------
In the Bag
Playmaker 14lb
Bam Blue/Black 14lb

For sale all 15lb
Blast Zone 2000 Sand Heavy Polish
Red XXXL 2000 polish
White Dot
Carbide+ 2nd Drill
Blue Slate gargoyle 2nd Drill
Blue Slate gargoyle 1st Drill
Fury NIB

Viper R.I.P (Cracked all the way arround ball)

Available for trade or sale

Edited on 12/1/2008 4:02 PM

Edited on 12/1/2008 6:00 PM

mrbowlingnut · « **Reply #21 on:** December 02, 2008, 04:29:21 PM »

Ok here we go the ball is now shiny with factory finish and 1k abralon underneath now it is an ok 2 nd or 3rd game ball. It did finally hook ok on the fresh shot but compared to a Sauce it is not even close but better than it was.

Used it game 3 for a 210, it was pretty straight still but got there and hit not bad not great. It might be better with 2k no polish I suspect but is a useable the way it is so i will keep it and stop whining.

At an easy house like South Point it probably will actually hook alot but what doesn't is the real question. So between South Point and some late block games you have there Hi-performance ball.

I love ball reviews it gives me somewhere to post your true thoughts good or bad, sometimes the truth just hurts so it goes i guess.

Just being honest with other BR members get a playmaker or Sauce over this ball and just save some money. Ebonite will get over it and so will I lol

I am sure the powers that be at Ebonite are monitoring this thread or so i think, lurk away instead of actually helping someone out.

dpetty · « **Reply #22 on:** December 03, 2008, 06:55:41 PM »

I concur that this ball needs shine to perform close to it's specs. The cover is just sooooooooooo strong for this ball. It does still work well when the lanes fry out (with polish), it's just not as strong on all fresh or oily patterns.

The next version may be a bit more versatile.

Ebonite Staffer
VA

Ragnar · « **Reply #23 on:** December 04, 2008, 08:16:50 AM »

I'm not sure what you guys are talking about. I just drilled a Striking motion. OOB finish (4000 abralon), drilled with the last layout on the drill sheet (Jason Couch trick layout, except I'm right handed) Place Pin: 1Â½ inches away from the Vertical Axis Line and 5Â¼ inches away from the PAP
Center of Gravity: The center of gravity placement may or may not fall inside the CG area. If it doesnâ€™t then the balance hole location may need to be adjusted. Mass Bias Placement: Mass Bias Placement at 60 degree angle to the left of the thumb hole. If needed place balance hole approximately 4 inches to the left and up 1 inch, drill back to statically legal.

I needed the weight hole as described.

This ball hooks as much as my Cell, in fact I was playing exactly the same line I do with the Cell. If this ball is like all new balls, I expect it to tame down a bit after 50 games, as my Cell did, so it will end up with a bit less hook than the Cell. It starts up fairly early, has great continuation, and hits like a bomb. My main complaint: in 3 games (662) I left 6 9 pins (but I am on Twister pins). I'm suspicious that Mrbowlingnut has a bad layout for his style.

mrbowlingnut · « **Reply #24 on:** December 04, 2008, 09:52:31 AM »

It is easy too agree the layout for this certain ball is wrong, not that i have used this this exact layout which is the suggested layout for my style on easily 500 MB balls in the past.

I have an NVD with same layout i have trouble from too much out so far, I really did not buy this ball for biggest hooking ball. I was thinking it would be as good or better than my Angular One or The One, nice through the fronts and big continuous backend reaction.

So far not even close to that reaction, so yes you are 100 percent right the layout on this certain ball sucks!!! Should I redrill it?

Doubt it I hate plug and probably can use on the China tonight at South Point. So all of sudden it will hook on a shot anything including Scouts hook alot on.

Of course you have more hook than me Ragnar you were posting before about the Silver Bullet hooking for you for me the ball is for 10 pins and super dry lanes.

I have no tilt about 330 revs and medium higher ball speed, so balls with MB too strong tend to want to go left fast and have nothing left without using the flip drillings for late revs and hook.

I have to clear the fronts or I am dead in the water, I did not like the Cell OOB it had to be polished for me to get any length out of it I mean any!!

scotts33 · « **Reply #25 on:** December 08, 2008, 09:24:58 AM »

Interesting that Dwight Albrecht found the same issues as you Barry.

http://www.ballreviews.com/Reviews/Reviews.asp?BallID=933&ManufacterID=5&ReviewID=30362
--------------------
Scott

SKIDSNAP · « **Reply #26 on:** December 08, 2008, 09:38:06 AM »

It is not a bad batch your rev rate must be in the area of a Tommy Jones for this ball to "come alive". If not the ball will never turn up. Rev rate under 450 need not apply...

mrbowlingnut · « **Reply #27 on:** December 08, 2008, 09:38:39 AM »

Scott That sums it up if you can find your magic surface it is going to be good, it is not The One or Total NV where almost every style liked it oob.

It is usable now polished to a marble on top of 1k abralon, it polishes way up fast so it takes changes fast. It might be better with a lower or higher grit underneath the polish which is Ebonite Factory finish.

I would have preferred Snake Oil but wanted to give the Factory finish the first try since it is there polish. So maybe for tonight I will knock it down and repolish it with Snake oil, cannot hurt much at this point.

last two games with it are 210,190 it has some potential but i have been struggling with poor mechanics the last two sets. So it is hard to blame the ball and not me for this week, I do like most Ebonite products and probably will get a Pin Slasher sometime around the 1 st of the next year.

The cover is so strong if you have no hand at all it could be great, guys with more tilt are going to like it more oob IMO.

Still love the Sauce and Playmaker both are easy to use with no mods, just go out and toss away shooting big games.

scotts33 · « **Reply #28 on:** December 08, 2008, 09:43:31 AM »

Understand Barry.

Dwight is a knowledgeable reviewer so I'd put some importance to his statement and as you found pretty much the same issue.

I thought, I'd post so that others could see it's not all them.
--------------------
Scott

mrbowlingnut · « **Reply #29 on:** December 09, 2008, 05:11:26 PM »

Ok I have figured this Turkey out and it has become a pretty good house shot ball, I took it back to 1k abralon again and stood on it hard with a spinner.

Got it nice and matte making sure all the Factory finish was off the ball for good, then used Valentino's Snake Oil on high speed and burned in the polish back to wet marble look again like the Factory finish looked.

Went out to league last night The Sauce was too much ball, some lane man messed up a brand new Kegel machine and it has been laying out more of medium christmas tree pattern. So I threw a Shock and Awe thinking the Activator+ cover would not burn up wrong to early and going left at 40 feet.

Took out the Striking Motion and boom perfect length and a nice continuous backend reaction that is rolled up nicely. Finally more reaction and pretty good hitting power, so be ready to work on it if you want more out of it.

Author Topic: Ok Ebonite staffers need Striking Motion help (Read 7944 times)

mrbowlingnut

Ok Ebonite staffers need Striking Motion help

batbowler

Re: Ok Ebonite staffers need Striking Motion help

DP3

Re: Ok Ebonite staffers need Striking Motion help

mrbowlingnut

Re: Ok Ebonite staffers need Striking Motion help

ramimac

Re: Ok Ebonite staffers need Striking Motion help

mrbowlingnut

Re: Ok Ebonite staffers need Striking Motion help

mrbowlingnut

Re: Ok Ebonite staffers need Striking Motion help

dpetty

Re: Ok Ebonite staffers need Striking Motion help

Ragnar

Re: Ok Ebonite staffers need Striking Motion help

mrbowlingnut

Re: Ok Ebonite staffers need Striking Motion help

scotts33

Re: Ok Ebonite staffers need Striking Motion help

SKIDSNAP

Re: Ok Ebonite staffers need Striking Motion help

mrbowlingnut

Re: Ok Ebonite staffers need Striking Motion help

scotts33

Re: Ok Ebonite staffers need Striking Motion help

mrbowlingnut

Re: Ok Ebonite staffers need Striking Motion help