win a ball from Bowling.com

Author Topic: JPF Axe Drill Sheet  (Read 1050 times)

CrazyHorse

  • Jr. Member
  • **
  • Posts: 7
JPF Axe Drill Sheet
« on: April 02, 2019, 01:22:27 PM »
I just picked up a Black Axe, does anyone have a drill sheet by chance?


Thank you in advance.☺

 

bcw1969

  • Sr. Member
  • ****
  • Posts: 474
Re: JPF Axe Drill Sheet
« Reply #1 on: April 02, 2019, 08:47:58 PM »
Check out this video...https://www.youtube.com/watch?v=-mSFeiHarXY
in the 6 - 9 second mark there is a Photo of the drill sheetnot very clear, but it is there. Also there is a review of this ball on 123bowl from bill from buddies proshop, he ended up putting a modern drilling on the ball. I pasted his review here   

I found this ball at one of our warehouses and I wondered what this old asymmetrical ball would do with today's asymmetrical layouts. I laid the ball out with the CG as the pin, because these balls only had a locator pin. I used the determinator to find the mass bias on this ball. I put the cg 5 inches from my PAP and the Mass Bias 4 1/2 inches from my PAP (Positive Axis Point). I went over this ball with 400 grit then polished the ball with 3m Rubbing Compound.


I threw this ball on a house shot that is dry. The shot was extremely dry on the outside with heavier oil in the middle. I shot 660 for the night, but this was more of an experiment for me. I wanted to see what today's layout would do in an older ball. I am amazed at how good a ball this ball is with modern layouts. I have done this with a couple of other balls and all have rolled well. I think that past asymmetrical balls could be good with a modern reactive coverstock. I wish that more companies would bring back


hope this helps,

Brad

johns811

  • Hero Member
  • *****
  • Posts: 1004
Re: JPF Axe Drill Sheet
« Reply #2 on: April 03, 2019, 07:09:59 AM »
I have information on this ball, a bunch of them surfaced from basement NIB a few years ago. The inventor may have been from the Cleveland area.  It will take some looking but I'll see if I can find it.

I HAVE IT in a jpg file format.
« Last Edit: April 03, 2019, 07:26:49 AM by johns811 »

CrazyHorse

  • Jr. Member
  • **
  • Posts: 7
Re: JPF Axe Drill Sheet
« Reply #3 on: April 03, 2019, 07:35:29 AM »
I have information on this ball, a bunch of them surfaced from basement NIB a few years ago. The inventor may have been from the Cleveland area.  It will take some looking but I'll see if I can find it.

Thank you very much!

Quote
Check out this video...https://www.youtube.com/watch?v=-mSFeiHarXY
in the 6 - 9 second mark there is a Photo of the drill sheetnot very clear, but it is there. Also there is a review of this ball on 123bowl from bill from buddies proshop, he ended up putting a modern drilling on the ball. I pasted his review here 

I did see the Youtube video and took a screen shot of the drill sheet at the beginning of the video, but when you expand it, it's just blurry.

Thank you for posting the review, I bought the ball in search of something to use on a burned up house shot and because I like to experiment with surfaces and a range of equipment to see what works for me and what doesn't. At the moment, my go-to when I'm not having any luck moving left with modern-day stuff is a Fab Black Hammer that resurfaced and left at 4000. I use it as a spare ball, but it comes in handy to use as a strike ball under torched conditions. I've put up some decent games throwing up 5 under these circumstances.

bcw1969

  • Sr. Member
  • ****
  • Posts: 474
Re: JPF Axe Drill Sheet
« Reply #4 on: April 03, 2019, 04:56:05 PM »
Even though the cover is old school Urethane, the core is very strong. I recently picked up a used black axe and put the mass bias in the strong position, and it will move.. I picked mine up to cpmpliment my previous two pickups......a Brunswick blue phantom nib and a brunswick crimson Phantom nib..I had been struggling with reactives being too much at the breakpoint and on the backend, so earlier this year went to an all Urethane league bag. This black axe fits perfectly as the middle of the bag ball with a strong blue phantom as the strong piece and a crimson phantom as the weak piece.

The axe will move and it does hit & carry very well(but still more controllable than a reactive ball)


Brad

johns811

  • Hero Member
  • *****
  • Posts: 1004
Re: JPF Axe Drill Sheet
« Reply #5 on: April 04, 2019, 06:03:53 AM »
I have the sheet, is it possible to post a picture? If not message me your email and ill send it

CrazyHorse

  • Jr. Member
  • **
  • Posts: 7
Re: JPF Axe Drill Sheet
« Reply #6 on: April 04, 2019, 12:03:23 PM »
I have the sheet, is it possible to post a picture? If not message me your email and ill send it

Didn't see an option to PM you in your profile, but my email is:

johnquadrizius(at)gmail(dot)com

Thank you!

dougb

  • Hero Member
  • *****
  • Posts: 1543
Re: JPF Axe Drill Sheet
« Reply #7 on: April 04, 2019, 03:10:35 PM »
And I thought I was old school playing down the twig with my Faball Blue Pearl Hammer! I had an Axe once but gave it to a friend before I plugged and redrilled it. Thanks for taking us back into the vaults!

CrazyHorse

  • Jr. Member
  • **
  • Posts: 7
Re: JPF Axe Drill Sheet
« Reply #8 on: April 04, 2019, 09:23:27 PM »
Took the Axe out tonight. Wow.

Luckily my span was close enough to the previous owner, the Pro Shop was able to cheat the slight difference with a slug in the thumb and obviously my size inserts.

I took it up to 3000 (Tru Cut). Worked like a charm throwing it up 5, walked right into the pocket and crushed it. Threw a 229, 222, and 238 on a burned up house shot.

Couldn't be happier. ;D