BallReviews
Equipment Boards => Faball => Topic started by: thfonz98 on April 06, 2005, 09:19:39 AM
-
i got one off of ebay for ~35 bucks shipped. I always wanted to try one of the mo faball balls.
so is the box finish 500 grit or so or should i just go 800 matte or 1000?
its drilled pin in leverage position and cg out(with hot 1" right of thumb) with thin shallow weight hole near pap.
i need to know what to take it to since the previous owner sanded one side and the other half is a finer texture...like 300 grit vs.800 grit
--------------------
YOU HAVE NO MARBLES!! (http://"http://161.58.5.90/mjrleag2/nomarble.wav") - major league 2
F.O.S. Member....Proof (http://"http://www.bowlingballexchange.com/upload_files/MVC-011F.JPG")
Edited on 4/6/2005 5:20 PM
Edited on 4/6/2005 5:23 PM
-
it looks duller than my super carbide bomb
i was thinking 800 would be a good starting point.
--------------------
YOU HAVE NO MARBLES!! (http://"http://161.58.5.90/mjrleag2/nomarble.wav") - major league 2
F.O.S. Member....Proof (http://"http://www.bowlingballexchange.com/upload_files/MVC-011F.JPG")
Edited on 4/6/2005 5:31 PM
-
Out of the box was 500 with sanding lines against the track showing, i had new one a year or two ago that came out of the box this way. Ball rolls well dull or polished so dont worry about changing it even high gloss works well, i have had 4 of them in the past.
-
been my absolute favorite and always seems to work when I brought it out.
Was 500 out of box but shined up with use.
I always used at 600(old paper sort of like 800 grit) crosshatch.
Then I put on Hookit! Still hits!
REgards,
Luckylefty