win a ball from Bowling.com

Author Topic: Deadly Aim  (Read 32319 times)

Ballreviews

  • Administrator
  • Hero Member
  • *****
  • Posts: 543
Deadly Aim
« on: January 29, 2014, 09:43:56 AM »
Ball NPS Score: 100.00
Hammer Deadly Aim Ball Specs:
- Color: Red/Orange/Yellow All colors do vary somewhat from the picture shown.
- Reaction: Length with Sharp Backend
- Coverstock: Primer Reactive Solid
- Core Type: Dead Center Core
- Factory Finish: 500-1000-2000 Abralon®-4000 Abralon with Powerhouse Clean N' Sheen
- Radius of Gyration (RG): 2.49**
- Differential (Diff): .054**
- ** RG and Diff are based off of 15 lb. balls
- Hook Potential: High
- Length: High
- Recommended Lane Condition: Medium-Heavy Oil
- Manufacturer's Warranty: 3 YEARS!

 

gilsalang0925

  • Jr. Member
  • **
  • Posts: 46
Re: Deadly Aim
« Reply #1 on: January 31, 2014, 01:08:23 PM »
LANE CONDITION

Length: 39-40

Volume: Medium to Heavy

Type (THS, Sport Pattern etc): THS


COMMENTS

Likes:  I drilled a Rico Layout pin under palm with the Mass Bias 45 degrees 6 3/4 hole shined.  The ball is so predictable, great roll, and hits like a Tank!  I'm pleased with this ball reaction.  I'm ready to test the waters on a flatter pattern.  Great Ball!

Dislikes: You need oil off course!  Once the front part of the lane burns.  We have other balls to use when the lanes breakdown. 


PICTURES AND/OR VIDEOS

Plowboy300

  • Hero Member
  • *****
  • Posts: 544
Re: Deadly Aim
« Reply #2 on: February 06, 2014, 11:02:53 AM »
BOWLER INFO:

PAP/Track:  5 1/8” x 1” up
Axis Rotation:  25 degrees
Axis Tilt:  12 degrees
Rev Rate: 425
Ball Speed: 15-17 mph

LANE CONDITIONS
Lane Patterns Used: 41' House Shot, 37’ Kegel Kode Pattern, 39’ Kegel Kode Pattern

BALL LAYOUT: 60 x 5 ¼ x 60

COMMENTS

The new Deadly Aim from Hammer is a very impressive ball with the heavy rolls that it provides. I really like the new cover/core combo on this ball and the motion that it provides. The Carbon Fiber in the outer-core is a 1st in the industry and I know that you hear it all the time, but this ball really hits HARD… Hardest hitting Hammer ball to date!

I received a short pin so I wanted to drill this ball to be very strong rolling piece for the heavier medium patterns. I will be drilling up another one of these with a pin up position to give it more length. With the cover prep, this ball does get through the fronts with ease, and provides a really strong, heavy rolling motion through the mid-lane that does not stop. This ball does not quit when moving inside and is hungry for more oil, so I would recommend if you are thinking of moving in with this ball, do it.

Dislikes: Drier lane patterns – there are other Hammer balls for these patterns. The box surface on my ball was a little too strong for THS pattern, so I put a little clean/sheen polish on the ball, and rolls much better. I would recommend this ball for the medium to medium heavier patterns.

With the new 3 year warrantee that Hammer is providing for this ball, this is the BEST bang for your buck!

This ball has a great motion that does not stop rolling in the backend – it really continues through the pin deck! 
Very versatile ball…

PICTURES AND/OR VIDEOS
http://i678.photobucket.com/albums/vv150/Plowboy300/37dc05bf-0892-41ee-9376-b9711a8b9009_zps45ece6f9.jpg
Michael Thompson
Hammer Amateur Staff Member

fatman_FUBAR

  • Sr. Member
  • ****
  • Posts: 354
Re: Deadly Aim
« Reply #3 on: February 23, 2014, 02:20:50 PM »
Hammer Deadly Aim

BALL SPECS
Pin Length - 3-4"
Starting Top Weight – 2.25 oz
Ball Weight - 15lb 4oz

DRILL PATTERN
Drilled at 60 Degrees X 5 1/4” X 30 Degrees

BOWLER STYLE
Rev Rate – 240 / 352 / 436 / 570
Ball Speed – 14.1 MPH / 18.6 MPH

PICTURE AND VIDEO LINKS



SURFACE PREPARATION
Grit - Out of the Box
Type (Matte, Polish, Sanded) - Out of the Box

LANE CONDITION
Length - 41 ft
Volume – 18.30 ml
Type (Wall, Xmas Tree, Sport) – Kegel Main Street (THS)

Don’t forget to follow us on Facebook @ http://Http://www.Facebook.com/LaneSideReviews

BowlingQueen00

  • Jr. Member
  • **
  • Posts: 9
Re: Deadly Aim
« Reply #4 on: March 05, 2014, 09:11:12 PM »
This is the hardest hitting ball I have ever thrown.. I wouldnt say I have a lot of hand.. but I do have alot of speed on the ball for a female and I typically leave about 5-7 10pins on average at league every week... This ball has drastically cut that down.. It even make a wicked sound when it hits the pins like your breaking them in half every time you strike.. worth the money, and looks awesome rolling down the lane with the BRIGHT red orange and yellow

Hammerhead216

  • Jr. Member
  • **
  • Posts: 16
Re: Deadly Aim
« Reply #5 on: April 10, 2014, 09:36:17 PM »
 Drilled this ball up with a layout of 60*5*40. My favorite. This ball eats up house patterns in houses that getting to the pocket is easy but getting good carry is hard. Ball had a hit like no other. Pins fly off this ball on impact. With that said it drives through the pocket leaving nothing standing.....Maybe a solid 8 or 9 here or there but I can live with that.

Going to hit the surface with a fresh 3000or 2000 pad to see how much the motion changes on tougher conditions

If your looking for a different ball motion with strong backend Deadly Aim IS your answer.

This ball gets a big thumbs up

Nothing hits like a HAMMER!

valanthekayland

  • Jr. Member
  • **
  • Posts: 12
Re: Deadly Aim
« Reply #6 on: May 21, 2014, 12:25:49 PM »
LANE CONDITION

Length:39-40

Volume:Medium to Heavy oil.

Type (THS, Sport Pattern etc): THS

Drilled: 5 1/2" pin placement from PAP - standard skid/flip layout for medium to heavy oil.

Ball speed: 14mph
Rev Rate: 250
Style: Stroker


COMMENTS

Likes:

Dislikes:  Unfortunately this ball seems to leave 10 pins like they're going out of style.  Currently I average 2-3 10 pins per game with the ball.  Even worse, I'm averaging a pocket 7-10 split every other game.  The motion on the ball breaks down horribly on heavier oil if you're not a VERY high rev bowler.  Three of us in my league use the Deadly Aim and all of us are lower rev bowlers...the motion on the ball is similar to throwing a dart...aka it doesn't move at all.  It skids constantly well past the break point and it has been incredibly difficult to get the ball to react.  One of the bowlers had to completely strip it down with a 500 Abralon pad to get 5-6 boards of movement out of the ball.  Additionally...I have never thrown a ball that was so speed dependent and is perhaps the most unforgiving ball in that regard I have ever seen.  I cannot recommend this ball outside of someone who is a high rev/cranker style bowler.

Too many balls and reviews anymore reflect the high end rev bowler only.  Even breakdown videos produced by the company are targeted only toward a minimal percentage of bowlers...and that's the real shame in this.  If you want to stick with a hammer ball and you're a lower rev bowler...the Deadly Aim is not for you.  The Black Widow Assassin and Cold Blood would be MUCH better options.


PICTURES AND/OR VIDEOS

12XSECH

  • Sr. Member
  • ****
  • Posts: 379
Re: Deadly Aim
« Reply #7 on: May 22, 2014, 04:26:57 PM »
LANE CONDITION

Length:40

Volume:med

Type (THS, Sport Pattern etc):


COMMENTS

Likes: Got the ball 3 weeks ago, drilled pin above ring finger, mb about 1 inch to right of thumb inline with GC. Hole on the pap...sorry dont know the exact #'s.
Med speed, med revs, tweener...214 avg. LOVE THE BALL!. 738, 684, 711, 722 AND 630 with the ball. Ball rolls heavy once it makes its turn and crushes the pins. I havnt used it on a heavy oil pattern yet, just a medium oil house shot in a place that isnt known for carry.

Dislikes:


PICTURES AND/OR VIDEOSI got

Joe Somd

  • Jr. Member
  • **
  • Posts: 80
Re: Deadly Aim
« Reply #8 on: May 24, 2014, 04:37:49 PM »
BALL SPECS

Pin Length:3-4
Ball Weight: 16lb
DRILL PATTERN
Layout: Pin under ring - Kicked CG at about 4pm
BOWLER STYLE
Rev Rate:425
Ball Speed: 16-17 mph
PAP/Track: 5 1/4 over and 1/4 up
SURFACE PREP

Finish: (Matte, Polish, Sanded): 2000 Abralon
LANE CONDITION
Length: 40ft
Volume: 50 UL
Type (THS, Sport Pattern etc): THS - but a higher volume pattern
BALL REACTION

On a scale of 1-10 ( 1=Low, 10 = High )
Length: 6
Back End: 7
Overall Hook: 8
Midlane Read: 6
Breakpoint Shape: ROLL

COMMENTS
Likes: I wanted the Deadly Aim to be my hook monster for heavy oil.  A ball that's rolls and hits without giving up having the pin drive through the pindeck.   THIS is what I got.   I moved in to about 20 at the arrows and got it all the way out to 8 and the ball came back with a hard heavy roll and drove through the pocket.  I moved 7 and 4 left and still got the roll for a messenger 10.  I leaked a couple out to 3 board thinking the ball would roll up and be DOA - NOPE, it still carried.   The first ball that Hammer has added Carbon Fiber to creating a strong bond between core and cover really does results in pins getting crushed!  Light, high, flush - this ball carries well!!


Dislikes: Do not throw it on lighter patterns. She will make her own friction :)

PICTURES AND/OR VIDEOS[/si
Joe Leingang

Get Tough - Get Hammer

#nothinghitslikeahammer  #TeamEBI

peter tarvydas

  • Newbie
  • *
  • Posts: 1
Re: Deadly Aim
« Reply #9 on: June 20, 2014, 07:53:40 AM »
LANE CONDITION

Length:

Volume:

Type (THS, Sport Pattern etc):


COMMENTS

Likes: its easy to see if this ball is biting into the pins thanks to its colour scheme the cover has plenty of grip add the carbonfibre outer core and you have got
 something serious. a pro shop review video ,on line shows this ball knocking pins backwards and downward and they say it sounds a bit like an echo, its true of course.
Dislikes:none


PICTURES AND/OR VIDEOS