Post by: Geetaan on May 10, 2009, 11:10:35 AM
I am new to lane 1, have been always interested in the company, but never got around to wanting to spend that much on a ball. anyways I want to try to put an aresenal together.... I really like the agent orange, and the supernova XP. where would those two fit in the arsenal? I am looking for a 4 ball arsenal..heavy, Med Heavy, Med, and Light. thanks!
Ryan
Post by: AK47 on May 10, 2009, 07:21:01 PM
--------------------
CHAINSAW = MONEY 
CHAINSAW MASSACRE = MORE MONEY
Post by: Geetaan on May 11, 2009, 11:05:52 AM
Post by: burly1 on May 11, 2009, 11:15:53 AM
--------------------
----------------------------------------
Patrick
Post by: urbanj51 on May 11, 2009, 04:39:01 PM
Otherwise the AO/Dynamo would be a good heavy oil ball.
Supernova XP as you suggested is a PHENOMENAL medium oil ball choice.
--------------------
F.O.S. 4 Life baby!
Reppin Lane #1 Loud and Proud baby!
Post by: T-GOD on May 12, 2009, 01:04:42 PM
Now for you suggestion of heavy, med heavy, med and light, it might go like this...Agent Orange, polished Dynamo, Chainsaw Massacre and Chainsaw. =:^D
Post by: urbanj51 on May 12, 2009, 02:41:01 PM
--------------------
F.O.S. 4 Life baby!
Reppin Lane #1 Loud and Proud baby!
Post by: urbanj51 on May 12, 2009, 03:04:27 PM
quote:
we have a local drug dealer with some really nice scales and a lane 1 ball driller that has to drink 18.9993 oz of kool-aid before drilling to get wts right...if kool-aid is snorted it really enhances ones ability to get wt correct...it just depends on how close and accurate you want to get with ending wts.....
The kool-aid comment made me laugh. Not gonna lie.....predictable....but funnny.
--------------------
F.O.S. 4 Life baby!
Reppin Lane #1 Loud and Proud baby!
Post by: urbanj51 on May 12, 2009, 03:16:01 PM
quote:quote:
Here we go again......
--------------------
F.O.S. 4 Life baby!
Reppin Lane #1 Loud and Proud baby!
I'd like to take you seriously, but I'm too busy laughing at your sig, gangsta. Word to yo motha, Lane 1 sucks.
If only you knew me. Funny thing is that moronic people like yourself make stupid comments like this and don't know 2 things about the person they're commenting towards. It's the internet homie. Get off the pole that's up your arse and keep your trap shut. Simple as that.
--------------------
F.O.S. 4 Life baby!
Reppin Lane #1 Loud and Proud baby!
Post by: urbanj51 on May 12, 2009, 03:24:17 PM
quote:
once upon a time not long ago
i used lane 1 but was like whoa!
the people who use lane 1 are crazy
and make up sh!t cuz there just lazy
they have their on thoughts and beliefs
the equipment so good it almost cheats
covers more boards and strikes much more
and keeps business in the kool-aid store
so when you want to be the best
get a diamond and kill the rest
t-god will always help with layouts
bowlerdawg will get mad, frustrated and pout
and whats his name, oh yea its steven
will always try to be the voice of reason
so throw lane 1 and join the crowd
and make the clones all so proud.....
word to yo mama, im out
That's awesome! Takes time to bash on a bowling ball and it's likers.
But that's creative!
--------------------
F.O.S. 4 Life baby!
Reppin Lane #1 Loud and Proud baby!
Post by: T-GOD on May 12, 2009, 03:39:57 PM
quote:
i thought surface changes nomaddah.....
Where and when have I ever said that surface changes dont' matter..? Uhhhh never.
Did you ever think that if you're hitting the hole and your ball isn't carrying, that changing the surface can very well take you out of the pocket..?
Whereas, a change in and/or different statics, using a weighthole and/or by increasing the size and depth of the hole, will not alter your line to the pocket as much, but will allow the ball to store or bleed off energy in the right place to achieve better carry.
Maybe, just maybe, all you need is the same ball with different statics. Having the same ball drilled slightly different could be the answer.
If you have 3/4 positive side in the ball and it's diving too hard on the backend, taking the ball to zero (edited typo) or negative will calm the backend a bit and vice a versa.
That's all were talking about here boys. It's obvious you don't understand this concept and that's fine. =:^D
Edited on 5/12/2009 5:13 PM
Post by: taylorj99 on May 12, 2009, 04:39:09 PM
quote:
dynamo with .55553 oz finger .45567 oz side and 1 oz top
agent orange with .25334 oz finger .77777 oz side .87765 oz top
massacre with .88889 oz finger .888889 oz side .888888888889 oz top
chainsaw with .15556 finger .33335 oz side .22229 oz top
this arsenal with these wts will dominate any pattern you will come in contact with!!!!!!!!!!!!!!!!!!!!!
Correct.
Post by: NoseofRI on May 12, 2009, 04:55:00 PM
quote:
CGsSuK,quote:
i thought surface changes nomaddah.....
Where and when have I ever said that surface changes dont' matter..? Uhhhh never.
Did you ever think that if you're hitting the hole and your ball isn't carrying, that changing the surface can very well take you out of the pocket..?
Whereas, a change in and/or different statics, using a weighthole and/or by increasing the size and depth of the hole, will not alter your line to the pocket as much, but will allow the ball to store or bleed off energy in the right place to achieve better carry.
[bold]Maybe, just maybe, all you need is the same ball with different statics. Having the same ball drilled slightly different could be the answer.[/bold]
[bold]If you have 3/4 positive side in the ball and it's diving too hard on the backend, taking the ball to zero and/or negative will calm the backend a bit and vice a versa. [/bold]
That's all were talking about here boys. It's obvious you don't understand this concept and that's fine. =:^D
T-God please don't tell me that the change of the numbers of the statics actually matters more than the size, depth, and location of the hole?
And on the 2nd bolder comment, you can take 3/4 to zero without changing the reaction at all based on where the hole is.. um and oh yeah, you can't exactly take the ball to zero AND negative side weight.
Post by: T-GOD on May 12, 2009, 05:11:23 PM
quote:The size, depth, and location of the hole ALL/EACH affect the statics in the ball.
T-God please don't tell me that the change of the numbers of the statics actually matters more than the size, depth, and location of the hole?
If you start with a large shallow hole and have 3/4 pos. side, then take the hole deeper, either with the same size or a smaller size, down to zero side or even negative, the ball reaction will different, becoming earlier.
If you start with a small deep hole and have 3/4 positive side and then use a big hole to open it up, going shallow, taking it down to zero or even negative, the ball reatioin will be different, becoming earlier as well.
So yes, the ending static numbers mean more than the hole size or depth..!!
The location of the hole changes the statics/ending center of the mass of the ball. You can make the ball go longer by placing the hole on the track side, increasing positive side. You can change ball reaction any way you want with a different hole location.
But remember, for every different hole location, you end with different ending static weights..!! =:^D
Post by: sluggo35 on May 12, 2009, 06:02:54 PM
Post by: Geetaan on May 12, 2009, 08:17:03 PM
Post by: SVstar34 on May 12, 2009, 08:29:35 PM
Medium - Chainsaw Massacre or SuperNova XP
Light/Spares - Chainsaw and/or Crystal Diamond/XXXL Starburst
--------------------
My Arsenal:
Rogue Cell (coming soon)
Bounty(4.5 x 4.75 Fresh 1000 Abralon)
Twisted Fury(5 x 4 500 Abralon + Reacta Shine)
Raw Hammer Pain(Leverage 1000 Abralon)
Blue Vibe(5 x 5 4000 Abralon + Reacta Shine)
Post by: ImBackInTheGame on May 12, 2009, 09:45:20 PM
quote:
wow, I didnt thnk I would get this kind of replies.... or even have something start...
This seems to be a standard Lane #1 thread. Supporters vs bashers, its kind of boring really.
--------------------
Arsenal:
Roto-Grip Cell Pearl (4000 abralon)
Lane #1 Chainsaw (2000 + Secret Sauce)
Lane #1 XXXL Starburst
F.O.S. Member
Post by: Saw Mill on May 12, 2009, 09:53:17 PM
Dynamo for heavy oil
Chainsaw Massacre or XP for med to med/light
Chainsaw ot TSH for light
XXXL for dry/spares
Dave
--------------------
Romans 1:15&16 "So much as is in me, I am ready to preach the gospel to you to you that are at Rome also. For I am not ashamed of the gospel of Christ for it is the power of God unto salvation, to everyone that believeth to the Jew first, and also to Greek!
F.O.S. Members, Our Assignment Should We Choose To Accept It, Polish and Sharpen Up Our Saws Pins Have Been Spotted, and We Are To Saw 'Em Up!!
Bomb Squad Certified and Licensed Diamond Cutter
Post by: Geetaan on May 12, 2009, 10:04:28 PM
Post by: T-GOD on May 13, 2009, 11:02:04 AM
quote:This is with ALL balls..!!
so is this with only lane 1 or all other companies
Although, I will say that you'll see MORE of a difference with statics in symmetrical core balls than asymmetricals. Lane #1 has mostly, if not all symmetrical cores, so you'll receive a greater benefit from using statics than without. =:^D