win a ball from Bowling.com

Author Topic: Got a hole to fill....  (Read 1187 times)

Graaille

  • Sr. Member
  • ****
  • Posts: 343
Got a hole to fill....
« on: April 12, 2008, 01:28:16 PM »
I have a question.  Love LM/L balls a lot, and I've picked up quite a few used.  Problem is, there's one house I bowl at for both practice and for a Saturday mini-league that usually puts down oil thats a bit lighter than medium.  
When the lanes are fresh, I can play my WC/R for about two games, then switch to my Buzz for two games.  Now, at the mid-point of the 4th game, I've probably moved as far left as I feel comfortable with using the Buzz, and that's when the splits start showing up more often than I'd like.
I have a Hornet that works fine as a spare ball, but as the next step down from the Buzz, I think it might be too much of a jump.

Any suggestions as to what might fit in the 'end of game 4, game 5-6' slot?

BTW, Righty, 14-15.5mph, generally play between 1st and 2nd arrow, low revs.  Most of my drillings are pin right of ring, cg below and to the left -- not quite in palm -- more like having the mass bias being right below thumb.  Buzz is the only one different -- pin above and between fingers, cg below and kicked right about 1.5".
The Gathering 2014 is near.  July 25-27 in Winston Salem, NC @ Creekside lanes.

 

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Got a hole to fill....
« Reply #1 on: April 13, 2008, 06:53:23 AM »
Seeing how your Buzz is drilled (can't get much weaker than that), I'd agree: drill the Hornet stronger OR [ichange the surface[/i]; so it's earlier and stronger. Because surface changes are easier AND more meanignful, I'd try that first.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ
"None are so blind as those who will not see."

Graaille

  • Sr. Member
  • ****
  • Posts: 343
Re: Got a hole to fill....
« Reply #2 on: April 13, 2008, 01:09:51 PM »
Thanks both.  The Hornet is actually drilled stacked leverage, but I generally throw it thumb up, or with the barest of fades for the dreaded 10 pin.  But even if I throw it like my strike ball, it still doesn't have that much of a turn -- probably because of my low revs.
The Gathering 2014 is near.  July 25-27 in Winston Salem, NC @ Creekside lanes.

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Got a hole to fill....
« Reply #3 on: April 13, 2008, 05:57:34 PM »
quote:
Thanks both.  The Hornet is actually drilled stacked leverage, but I generally throw it thumb up, or with the barest of fades for the dreaded 10 pin.  But even if I throw it like my strike ball, it still doesn't have that much of a turn -- probably because of my low revs.


I sanded mine to 2000 grit and it did make some difference. You can always re-surface. cheaper than re-drilling and than buying a new ball. Try either 800 grit sanding PLUS very light polish or a 1200, 1500 or 2000 grit sanding with no polish, as possibilities.

--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ
"None are so blind as those who will not see."