win a ball from Bowling.com

Author Topic: Any way to get rid of calluses on thumb?  (Read 31432 times)

Cyril The Syrup

  • Full Member
  • ***
  • Posts: 111
Any way to get rid of calluses on thumb?
« on: November 30, 2012, 07:19:59 PM »
Ive developed a calluse on both sides of my thumb due to (I think) too tight thumbhole. Have decided to try interchangable thumb slugs now to alleviate this problem, but was wondering if any one knows of any ways to get rid of these calluses.
Thanks

 

MI 2 AZ

  • Hero Member
  • *****
  • Posts: 8150
Re: Any way to get rid of calluses on thumb?
« Reply #1 on: November 30, 2012, 07:45:55 PM »
If you are sure that the sides are too tight, have you had your driller try to oval the thumbhole for you?

There used to be a section on calluses in the BR FAQ, but since the makeover on this site, some of the sections disappeared.  Here is what is missing from the FAQ:

Causes Of Calluses Courtesy of Motiv Girl.


These tips are from coach Bill Hall and Jayhawk Bowling.


Making changes such as adding wrist devices or other types of gloves can have a
great affect on how your hand fits into the bowling ball. Also making adjustments to your physical game can have a great affect on how your hand holds onto or releases the bowling ball. It is your responsibility to make sure your ball driller is aware of the
changes you are trying to make in your game.

Thumb:

 1. Callus on back of the thumb. This is a great indicator that you are knuckling the ball and holding the ball more with the thumb than you are with the fingers. You either have too much reverse in the thumb, causing you to squeeze it with the thumb, or it could be that you are out of rhythm. It can also mean your span is too long.

 2. Burn mark on tip of the nail of the thumb which may turn black after a while. This means you have too little reverse or a span that is too long. It is also a sign you are hitting up on the ball at the release point.

 3. Calluses on both sides of the thumb. This is usually not a grip problem but more of a sign that you are turning the ball early at the bottom of the swing and probably turning the ball more with the thumb than you are with the fingers.

 4. If you have callus buildup on the inside part of the thumb, it only means that you are coming over the top of the ball, which is usually caused by wrapping the ball behind your back during the swing.

 5. A burn mark on the front side of the tip of the thumb, that often turns brown. This is a sign that you have too little reverse in the thumb, too long of a span, or are having your swing wrap around behind your back. It can also mean that you are trying to grab the ball at the point of release in an effort to try to put more revolutions on the ball than your physical game is set up to deliver. This is common with bowlers who wear wrist devices.


 6. Callus on the front side of the thumb at the base and another on the outside edge of the thumb. Now this is just slight wear from constant repetitions of the ball coming of the thumb, and not any large callus, or blister, or burn mark, or black mark. That is all it is nothing more.

Fingers:

 1. Calluses on both sides of the fingers. This is usually a sign of a couple of different things, one being that the finger holes are way too tight. When this happens it causes the skin to spread out and touch the side walls of the holes causing the skin to be irritated. At first there are blisters, soon followed by callus buildup.
The second thing that usually causes these calluses to appear is when a bowler comes over the top (over-turning) at the point of release.

 2. Callus buildup on the inside part of the fingers. This is a very common sign that a bowler is turning the hand too early and then trying to correct it at the point of release by trying to turn the hand back behind the ball as the release is completed.

 3. Callus buildup on the outside part of the fingers. This is a rare on to see and usually not a flaw in the physical game but a flaw in the grip having too little side pitch.

 4. Burn mark on the nails of the fingertips. This is very common sign when the grip is too long or the pitches are tucked too far under and don't accommodate the flexibility or lack of flexibility of this part of the hand.

 5. Moving to the front side of the pads of the fingers. Callus buildup is at the tips of the fingers and not centered on the pads of the fingers. This is without a doubt a span is way too long. It is something you see a lot with bowlers that are trying to get more revs on the ball. Of course, it doesn't work out that way and just causes these bowlers to hit up on the ball at the point of release and to get out of the ball late.

 6. If the callus is in the center of the finger tip pad. There is nothing wrong with this type of callus as long as it is not overly thick (just normal wear).
If the center of the pad callus turns into a burn mark or brown mark. it is mostly caused by hitting up on the ball at the point of release or having the fingers pitched too far under, causing them to drag as they exit the finger holes.

Whatever you do, do not just leave it up to the ball driller to keep track of where your grip started and the changes that you have made along the way. Request a copy of each of your drill sheets and keep them in order by dating them so that you know what changes were made and when.
The hand is a complex part of the body and many times it just takes small adjustments with the fit to be able to have a comfortable feel, so be sure to discuss them with your ball driller to help solve some of the problems.

The previous tips are from coach Bill Hall.

Normal other than excessive callusing.
From Jayhawk Bowling.

Fitting Tips

Getting just the right fit is the most important aspect of running a pro shop. If a ball doesn’t feel right, the bowler won’t relax his hand in the ball and won’t be able to roll it properly.

Diagnosing problems with balls that a customer brings to you is an important aspect of making a customer feel confident in your ability to drill his new equipment and possibly gain you a new customer for life!! Here are some tips for checking a bowlers hand and calluses:

The Importance of Checking the Bowlers Hand:
Any bowler who bowls too little, or too much, is bound to have problems with his or her bowling hand. The infrequent bowler does not give the hand a chance to become accustomed to the friction caused by the ball leaving the hand.

No matter how good the fit, there must be some degree of pressure on the fingers and thumb. If the bowler does not bowl often enough, blisters may form at the spots of contact. These usually are minor and develop when the occasional bowler bowls too many games in one session.

Normal Callus:
An average bowler will form a callus - a hard, thickened area on the skin - wherever the fingers and thumb have contact with the ball. It is formed because of the weight bearing of the ball on certain parts of the hand. This may be good for a bowler.

Pathological Callus:
Excess pressure, an ill-fitting ball, and improper use of a properly fitted ball may cause what is known as a pathological callus. This is one to worry about because it is painful and greatly hinders a bowler. The pathological callus is a hard mass of skin surrounded by an inflamed rim and it may have a deep central core like a corn. These areas do not stretch when the thumb or finger are flexed. The result is a burning sensation.


_________________________________________
Six decades of league bowling and still learning.

ABC/USBC Lifetime Member since Aug 1995.

ccrider

  • Hero Member
  • *****
  • Posts: 2230
Re: Any way to get rid of calluses on thumb?
« Reply #2 on: December 01, 2012, 01:07:37 AM »
Razor blade.

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Any way to get rid of calluses on thumb?
« Reply #3 on: December 01, 2012, 06:22:37 AM »
Sandpaper. Much safer than razor blades. Soften them first with very warm water.

Since I started using tape on the back of my thumb, I get no more calluses. In fact, what was there is now gone. It actually looks like I don't bowl.

I think calluses are a lot like "Grip pressure" to hold onto the ball. Coaches tend to say if you're gripping the ball, it's a bad thing. Heck, If I'm not using some pressure the ball won't stay on your hand. Calluses are the same thing. If you don't have some, you're not bowling or the thumb hole is way too big for you. The bad thing is too much callus and too much grip pressure.
"None are so blind as those who will not see."

greenefam

  • Hero Member
  • *****
  • Posts: 852
Re: Any way to get rid of calluses on thumb?
« Reply #4 on: December 01, 2012, 09:48:20 AM »
I use a pumice stone after bowling and it smooths out the calluses. 

I like the summary of a normal callus and a pathological one.  If you are developing calluses from the pressure and it benignly creates calluses without pain then go with sandpaper / pumice / whatever smooths them out and keeps them from being a problem.  If you thumb is ripping and healing a callus on top of that get your fit fixed.

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Any way to get rid of calluses on thumb?
« Reply #5 on: December 01, 2012, 10:17:59 AM »
This won't get rid of your problem immediately like the above posts will.

...And you want to understand and solve the problem forever...
http://www.jayhawkbowling.com/Pro_s_Corner/Fitting_Tips/fitting.html

Look at the next to the bottom picture.

You probably have an oval thumb in tight round hole.  Two ways to solve it, get an oval hole made to fit your thumb.  Not my preferred method.

Get a bigger round hole that accomadates your side to side measurement and tape front to back and occassionally a little on the side.  This seems to be a great way to get a clean release as often as posssible.

Regards,

Luckylefty
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

Smash49

  • Hero Member
  • *****
  • Posts: 2136
Re: Any way to get rid of calluses on thumb?
« Reply #6 on: December 02, 2012, 11:57:09 AM »
This is simple....   Drill bits are round thumbs are not.  If your ball driller is not helping you by fitting your ball after it is drilled shame on them.  Every bowling ball needs to be fitted out before being used.  I would suggest learning to do it correctly yourself makes things a lot easier.

Smash49
Top 100 Coaches by Bowler's Journal International 2007, 2008, 2009, 2010, 2011 and 2012!  Outstanding Coach in the state of Texas by Bowler's Journal International 2006.
IBPSIA Certified Pro Shop Technician
SLSM Designs Bowling Accessories.
www.bowlersslidesock.com