BallReviews

General Category => Miscellaneous => Topic started by: Big Columbia on May 12, 2008, 06:00:24 AM

Title: Heavy oil ball
Post by: Big Columbia on May 12, 2008, 06:00:24 AM
Who is making the true heavy oil ball now? The strongest ball I have is the Complete NV. I usually don't see heavy oil but I got burnt yesterday by not having a true oiler......

Edited on 5/12/2008 2:01 PM
Title: Re: Heavy oil ball
Post by: don coyote on May 12, 2008, 02:08:28 PM
Visionary's Centaur Particle. Do NOT drill it strong, it will burn up. The cover does not polish well. If you must, take the cover down to 1000 abralon. This is the perfect ball for HEAVY oil. ANYTHING else and it burns up. I have used this ball 3 times. I have owned it 2 years. I use it to BURN a hole in a FLOODED shot, then I put it away.  BEST OF LUCK!
Title: Re: Heavy oil ball
Post by: 1MechEng on May 12, 2008, 02:11:34 PM
My LevRG at OOB works well on heavily oiled lanes.
Perhaps you can also look at a Resurgence, or a Cell?
--------------------
======================
Dan
======================
Engineering * Bowling = a fun and practical application of rotational kinematics.

Bowling Nerd Herd (TM) Member
Title: Re: Heavy oil ball
Post by: n00dlejester on May 12, 2008, 02:14:28 PM
From what I've seen, LevRG, Attitude Shift or the Cell.
Title: Re: Heavy oil ball
Post by: tenpin477 on May 12, 2008, 04:53:45 PM
The Resurgence and the Cell seem like good fits for what your really looking for. You could also get something like an Ebonite Gamebreaker and take the surface down, that also works well.
Title: Re: Heavy oil ball
Post by: OddBalls on May 12, 2008, 04:56:20 PM
I use a PBA Inferno (white/black one) which is the Scorchin Inferno. Drilled pin up, 4" ptp, the ball is a monster in oil.

Ebay has them cheap..
--------------------
Inverted 1 and Dead Flush are my Evil Twins...
Title: Re: Heavy oil ball
Post by: shelley on May 13, 2008, 08:22:13 AM
The only real super-heavy left is the AMB Particle.  Like other high-load particle balls, it's kinda in a class by itself.  However, for what most people would call heavy oil, the Cell is pretty hot.

SH
Title: Re: Heavy oil ball
Post by: RSalas on May 13, 2008, 08:32:36 AM
Not to derail, but I have a question:  Where do you all *find* these heavy oil conditions?

I think I've had to bowl on what I would call "heavy oil" once in the last seven years, and even then, the condition broke down fairly quickly.  Even the flatter patterns I've bowled on have had *some* friction to move the ball.
--------------------
...formerly "The Curse of Dusty," and "Poöter Boöf" before that...

"Powered by Brunswick since 2002"
Title: Re: Heavy oil ball
Post by: Slopsurprise on May 13, 2008, 08:40:13 AM
quote:
The only real super-heavy left is the AMB Particle.  

SH


What about the Brunswick Mammoth?

Seriously folks, these 2 balls are beyond heavy oil balls. These are basically all out flood balls that you use when you cant even get anything else to wrinkle or even roll, let alone hook. They are very much for EXTREME conditions.
Title: Re: Heavy oil ball
Post by: BigHorhn on May 13, 2008, 12:08:23 PM
I usually use my terminal velocity by AMF on heavy oil, at least relative to the house shot. I bowled a sweeper a few weeks back and was on the oiliest pair of lanes that I have run into in quite sometime. Couldn't get the terminal to wrinkle. Its drilled pin below the ring finger with the cg kicked a little.
So I picked up a world class particle of ebay cheap, always wanted to try legends. I plan on drilling it fairly strong and taking the cover down. I will probably not use it much at all, like Bracket Creep said, but I don't want to be caught like that again.
Title: Re: Heavy oil ball
Post by: Maine Man on May 13, 2008, 12:10:42 PM
My vote is for the MoRich LevRg.  I use this ball on a THS in a place that has very weak backends, and I can also use it on the Scorpion and the Shark from very different angles and still carry well with it.  I have the surface at 2000 abralon, pin next to ring, mb next to thumb, hope this helps.
--------------------
MainePBA
"Power tends to corrupt absolute power corrupts absolutely." Lord Acton
Title: Re: Heavy oil ball
Post by: Big Columbia on May 16, 2008, 08:46:49 AM
Thanks everyone for the replies. I think I am going to go with either Visionary's Centaur Particle or the Scorchin..........
Title: Re: Heavy oil ball
Post by: dizzyfugu on May 16, 2008, 08:50:15 AM
quote:
The only real super-heavy left is the AMB Particle.  Like other high-load particle balls, it's kinda in a class by itself.  However, for what most people would call heavy oil, the Cell is pretty hot.

SH


There's also Brusnwick's Mammoth left, if you prefer a symmetrical core ball. Together with the AMB Particle Centaur IMHO those two balls that define the true high end in oil balls, because of their particle load. If these do not move, nothing else will, or there is too little oil and they burn out at your feet
--------------------
DizzyFugu (http://"http://www.putfile.com/dizzyfugu/") - Reporting from Germany

Confused by bowling?
Check out BR.com's vault of wisdom:  the unofficial FAQ section (http://"http://www.ballreviews.com/Forum/Replies.asp?TopicID=74110&ForumID=16&CategoryID=5")
Secrets revealed:  What's a fugu? (http://"http://en.wikipedia.org/wiki/Fugu")
Title: Re: Heavy oil ball
Post by: Buckwild on May 16, 2008, 08:52:18 AM
What about the Epic Battle or Quest?
Title: Re: Heavy oil ball
Post by: BOWL119 on May 16, 2008, 05:29:32 PM
In my current arsenal, I would have to say the the LevRG would be the true heavy oiler. But I did own a Mammoth and that ball was just outstanding when the lanes were flooded.
--------------------
Thanks in advance for all comments...

T.J.
BOWLING IS FUN NO MATTER WHAT YOU SCORE. BUT A 300 IS ALWAYS NICE.
Awesome Revs, Finish, Flip, LevRG, N'Sane, Onslaught, Bravo,
GOOD LUCK AND GOOD BOWLING!!!
Opinions are just that, opinions.

This is the LAND OF THE FREE because of THE BRAVE. THANK YOU, OUR MILITARY MEMBERS
Title: Re: Heavy oil ball
Post by: noturcuzin on May 16, 2008, 05:41:28 PM
Blast Zone.
--------------------
CHRIS FARLEY:1964-1997

JOHN CANDY:1950-1994

"NO RESPECT, I GET NO RESPECT."-the great Rodney Dangerfield
Title: Re: Heavy oil ball
Post by: BrianCRX90 on May 16, 2008, 07:03:07 PM
There is a huge selection of aggressive balls. There isn't a narrow field of "heavy oil balls".

Guess what, you will have to play the lanes straighter/tighter at times. That's the way it is. There is no magic ball for true flat, heavy oil lanes you are going to play like a regular cake AMF party house shot. That is life.
Title: Re: Heavy oil ball
Post by: T-GOD on May 16, 2008, 08:35:48 PM
For true heavy oil....BuzzBOMB....BuzzBOMB....BuzzBOMB. Read the magazine reviews and check out the vids on the net. Then choose whatever ball floats your boat. =:^D