BallReviews

General Category => Miscellaneous => Topic started by: six pack on December 08, 2016, 07:54:25 PM

Title: I want Smoooooooth
Post by: six pack on December 08, 2016, 07:54:25 PM
list off some of the best smooth bowling balls for med/light oil. Thanks
Title: Re: I want Smoooooooth
Post by: bcw1969 on December 08, 2016, 09:11:49 PM
Visionary Gladiator LE..there's one on ebay currently.

Brad
Title: Re: I want Smoooooooth
Post by: CoorZero on December 08, 2016, 09:49:25 PM
900 Global X is probably your best bet, although it's hard to find a smooth reaction on light/medium patterns. At least that's how it's been in my experience.
Title: Re: I want Smoooooooth
Post by: xrayjay on December 08, 2016, 09:50:30 PM
for me, it's these two....lane masters power strike and blue hammer
Title: Re: I want Smoooooooth
Post by: iamone78 on December 08, 2016, 11:25:20 PM
+1 on the 900 Global X. Also, a Break Down, or Chemical X are also good options.
Title: Re: I want Smoooooooth
Post by: Gunso on December 09, 2016, 01:59:56 AM
I really like my storm match solid. I go to it when my BTU starts to get a little jumpy and I need something more smooth
Title: Re: I want Smoooooooth
Post by: Rightycomplex on December 09, 2016, 04:32:27 AM
You could try layout changes to get the ball to do something different. Short pin to PAP on a symmetrical and a hole on the midline for good measure will smooth out the ball roll. As well, you can try Urethane just do a good amount of surface to combat the lack of oil absorption.
Title: Re: I want Smoooooooth
Post by: charlest on December 09, 2016, 07:49:51 AM
for me, it's these two....lane masters power strike and blue hammer

Lane Masters Wasp series are pretty even also.
Storm Tropical Storm Hybrid and the Ride are pretty even, in general.
Brunswick LT-48 Vintage is very even, as is the Fanatic BTU.
Title: Re: I want Smoooooooth
Post by: charlest on December 09, 2016, 07:52:39 AM
You could try layout changes to get the ball to do something different. Short pin to PAP on a symmetrical and a hole on the midline for good measure will smooth out the ball roll. As well, you can try Urethane just do a good amount of surface to combat the lack of oil absorption.

Larger VAL angles smooth out many balls, as does the very basic concept of sanding a polished ball to 2000, 3000 or even 4000 grit.

The equivalent is true of asymmetric cores: Moving the PSA/MB towards the PAP/VAL can smooth out the ball reaction a lot.
Title: Re: I want Smoooooooth
Post by: St. Croix on December 09, 2016, 08:12:28 AM
If you can find one, the Venom Panic has a nice even arc on light/medium conditions.
Title: Re: I want Smoooooooth
Post by: Impending Doom on December 09, 2016, 09:34:56 AM
I'm surprised no one has mentioned the Rebel Tank. Pearl urethane with a light bulb core.
Title: Re: I want Smoooooooth
Post by: charlest on December 09, 2016, 09:49:46 AM
I'm surprised no one has mentioned the Rebel Tank. Pearl urethane with a light bulb core.

But then all urethanes are supposed to be very smooth ...
Title: Re: I want Smoooooooth
Post by: don coyote on December 09, 2016, 09:55:28 AM
If you can find one-I LOVE my Blue/Green Centaur. Never over reacts!

I can't believe Visionary doesn't make this anymore.

I've had way too many people offer to buy this ball from me! NOPE!
Title: Re: I want Smoooooooth
Post by: billdozer on December 09, 2016, 10:27:22 AM
Reactive

IQ tour with a pin down layout. 
Title: Re: I want Smoooooooth
Post by: Impending Doom on December 09, 2016, 10:53:38 AM
I'm surprised no one has mentioned the Rebel Tank. Pearl urethane with a light bulb core.

But then all urethanes are supposed to be very smooth ...

Understood, but if you're on light oil, use a ball that won't check up in the heads.
Title: Re: I want Smoooooooth
Post by: xrayjay on December 09, 2016, 10:54:25 AM
for me, it's these two....lane masters power strike and blue hammer

Lane Masters Wasp series are pretty even also.
Storm Tropical Storm Hybrid and the Ride are pretty even, in general.
Brunswick LT-48 Vintage is very even, as is the Fanatic BTU.

i wish i got the TBH when it was available...

The LT48 is smooth too, but on lighter conditions it's hard for me to keep this ball right.
Title: Re: I want Smoooooooth
Post by: REmarcaBOWL on December 09, 2016, 11:16:04 AM
If you want to ball out and import an international piece... I highly recommend Storm pieces with the NRG Smooth coverstocks. Absolutely nothing like it in the states

Storm NRG Smooth pieces:
Marvel Maxx (discontinued)
Marvel Maxx 2 (discontinued)
Nano Lock
Virtual Gravity N/S
Marvel Maxx Gold
Wild Bite Extreme


Marvel Maxx Gold (now very scarce)

Nano Lock (now very scarce)

Virtual Gravity N/S (on sale)

Wild Bite Extreme (newest)
Title: Re: I want Smoooooooth
Post by: REmarcaBOWL on December 09, 2016, 11:23:04 AM
Sword U is another sick option... Pitch Black cover with the Marvel Core  :o
Title: Re: I want Smoooooooth
Post by: leftybowler70 on December 09, 2016, 11:24:13 AM
One ball that has not been mentioned that is smooth as butter is the Brunswick Fanatic;  a benchmark price that offers a smooth, but controllable motion,  with great predictably throughout the entire lane.
Title: Re: I want Smoooooooth
Post by: hammajangs on December 09, 2016, 12:27:16 PM
Buttery smooth and my go-to ball is still the Storm Ride.  If I need a little more length with a little more pop, then out comes the Joy Ride.   8)
Title: Re: I want Smoooooooth
Post by: tuckinfenpin on December 09, 2016, 01:51:40 PM
My vote would be the Rack Attack Grape Solid. Smooth and predictable.
Title: Re: I want Smoooooooth
Post by: charlest on December 09, 2016, 02:16:19 PM
for me, it's these two....lane masters power strike and blue hammer

Lane Masters Wasp series are pretty even also.
Storm Tropical Storm Hybrid and the Ride are pretty even, in general.
Brunswick LT-48 Vintage is very even, as is the Fanatic BTU.

i wish i got the TBH when it was available...

The LT48 is smooth too, but on lighter conditions it's hard for me to keep this ball right.

The Tropical Storm IS the Tropical Breeze. They just changed the name to get more sales. The Hybrid is still there; in fact, Buddies still uses the picture of the Tropical Breeze in their web page for the Tropical Storm.
https://www.buddiesproshop.com/shop/storm-tropical-storm-blackcherry-hybrid-3773/ (https://www.buddiesproshop.com/shop/storm-tropical-storm-blackcherry-hybrid-3773/)
Title: Re: I want Smoooooooth
Post by: DP3 on December 09, 2016, 04:45:01 PM
900 Global Black Boost
Title: Re: I want Smoooooooth
Post by: xrayjay on December 09, 2016, 06:35:56 PM
for me, it's these two....lane masters power strike and blue hammer

Lane Masters Wasp series are pretty even also.
Storm Tropical Storm Hybrid and the Ride are pretty even, in general.
Brunswick LT-48 Vintage is very even, as is the Fanatic BTU.

i wish i got the TBH when it was available...

The LT48 is smooth too, but on lighter conditions it's hard for me to keep this ball right.

The Tropical Storm IS the Tropical Breeze. They just changed the name to get more sales. The Hybrid is still there; in fact, Buddies still uses the picture of the Tropical Breeze in their web page for the Tropical Storm.
https://www.buddiesproshop.com/shop/storm-tropical-storm-blackcherry-hybrid-3773/ (https://www.buddiesproshop.com/shop/storm-tropical-storm-blackcherry-hybrid-3773/)

I thought it was blue in color. I just saw too that the heat is a hybrid... Christmas birthday gift to myself lol
Title: Re: I want Smoooooooth
Post by: six pack on December 09, 2016, 10:10:39 PM
looks like I'm going to try a Global X. I've read to many post suggesting the BTU was stronger then expected.
Title: Re: I want Smoooooooth
Post by: ThomasBowling on December 10, 2016, 12:16:32 PM
Freak Show
Title: Re: I want Smoooooooth
Post by: GlobalDestruction on December 10, 2016, 02:07:00 PM
I 2nd the IQ Tour solid with a pin down layout.  The ball is the definition of smooth. 
Title: Re: I want Smoooooooth
Post by: six pack on December 10, 2016, 03:33:41 PM
Freak Show

nope  not mine. although it is a good ball
Title: Re: I want Smoooooooth
Post by: leftybowler70 on December 10, 2016, 03:44:13 PM
+1 My freakshow is also far from smooth, very snappy off the breakpoint. Just as strong, and even stronger than some of my medium pieces.
Title: Re: I want Smoooooooth
Post by: ThomasBowling on December 10, 2016, 04:19:20 PM
Guess it's just me and my low rev rate and such then :P
Well I am bowling with the Freak Show the most these days. Only play on medium oil really. I've played on a sports pattern once, and not even the Grudge ball I have would hook on it for me :P
Title: Re: I want Smoooooooth
Post by: Brian Green on December 10, 2016, 07:51:15 PM
My pics for smooth:   DV8 vandal   brunswick fanatic 
Title: Re: I want Smoooooooth
Post by: Team B.R.A.D. on December 10, 2016, 08:08:41 PM
Both the Fanatic and the BTU Fanatic are very smooth.  The Fanatic is stronger but I've found it to be very smooth of the spot and not too aggressive.  Both pieces play really well on medium to medium dry lanes. 
Title: Re: I want Smoooooooth
Post by: 2handedrook12 on December 10, 2016, 08:30:06 PM
For medium-light oil, my vote is the Ride. One of my favorite balls all time because it is super predictable.
Title: Re: I want Smoooooooth
Post by: bautch24 on December 15, 2016, 11:59:20 AM
I am a no thumb bowler with medium speed, my go to ball on the toast that is super smooth is a weak drilled Motiv Freestyle. It amazes me every time I use it, the best weak ball I've ever had.