win a ball from Bowling.com

Author Topic: Solid ball question  (Read 2805 times)

carlos

  • Sr. Member
  • ****
  • Posts: 386
Solid ball question
« on: January 14, 2023, 05:04:46 PM »
I have a friend that bowls basically up the boards with about 16.5 mph. What solid ball has the fastest response to dry on a fresh house shot ? Just trying to get some ideas to help him. Thanks

 

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4331
Re: Solid ball question
« Reply #1 on: January 14, 2023, 05:29:50 PM »
I have a friend that bowls basically up the boards with about 16.5 mph. What solid ball has the fastest response to dry on a fresh house shot ? Just trying to get some ideas to help him. Thanks

Depends on rev rate and if he needs an asym or not.  At 16.5 MPH; that would mean he is closer to 18.5 - 19 at release. What is he using now?  This will give us a baseline to go off of.  So the two things we need are his rev rate and what he is currently using. Without knowing those two things and only ball speed for which to base this from we would be looking at something like a DV8 Hellcat (asym) or new Knock Out Bruiser, Phaze 2, Dark Web or Cuda (symmetrics).
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

carlos

  • Sr. Member
  • ****
  • Posts: 386
Re: Solid ball question
« Reply #2 on: January 14, 2023, 06:32:13 PM »
His rev rate is about 275-300 and he has a Proton Physics and he just picked up a Exotic Gem which appears to be a third game type ball to me and the Proton seems to not turn the corner hard enough. He tried to lower his ball speed but he said it takes him out his natural rhythm.

CoorZero

  • Hero Member
  • *****
  • Posts: 1245
Re: Solid ball question
« Reply #3 on: January 14, 2023, 09:03:33 PM »
16.5 downlane isn't extremely fast and 275-300 revs aren't that low. With a Proton and Exotic it seems odd that he doesn't see enough response off the spot. Unless those balls are way too strong for the conditions/where he's playing or his release is very much up the back.

carlos

  • Sr. Member
  • ****
  • Posts: 386
Re: Solid ball question
« Reply #4 on: January 15, 2023, 09:18:28 AM »
From what I can tell he seems to come up the back sometimes and sometimes around the side. He bowls 1 night a week and has a 220 average. Now it's just a house shot nothing modified.  He was wondering if he purchased the wrong ball with the Exotic or do sometimes to the surface of the Proton. Thanks for your help

tommyboy74

  • Hero Member
  • *****
  • Posts: 1826
Re: Solid ball question
« Reply #5 on: January 17, 2023, 01:56:57 PM »
16.5 downlane isn't extremely fast and 275-300 revs aren't that low. With a Proton and Exotic it seems odd that he doesn't see enough response off the spot. Unless those balls are way too strong for the conditions/where he's playing or his release is very much up the back.

Thinking about this a little bit, I'm thinking since the rev rate isn't that low with average to lower speed and a THS, the ball might be burning up downlane.  The Proton comes at 2000 grit OOB.  That is quite a bit of surface to work with.  Mix that in with having a lower RG core and a medium-high differential and the ball is designed to have a little length but still be early overall.  Then the Exotic has a low RG core and high differential with a Nano cover.  This means it will still be early.

My thought is that if he wanted to stay with asyms on THS that he should look to surface changes first and probably add some compound or polish.  This will let the ball skid more through the fronts and help store some energy for the back.  Another option potentially is to look at weaker layouts.  In either case, try surface changes first as that is one of the most important things to look at.  The lower the RG value on the core means that the earlier the hook.  Higher differential means higher flare potential.  This combination on THS can be tough to use on a consistent basis.

If the balls simply don't match up, I would look more towards a symmetrical solid/pearl/hybrid and then adjust surface as needed and/or use in combination with a pin above layout based on PAP.  Also, I would potentially look at moderate to higher RG numbers for the core and then medium differential as this will help give easy length, store enough energy to react downlane, and not overly flare.

Balls that typically fit this realm would be the Storm Phase V, Storm Hy-Road, Roto Grip Idol Cosmos, Brunswick Knock Out Bruiser, Hammer Dark Web, Columbia 300 Cuda, Motiv Ripcord to name a few. 

These are all general suggestions.  However, I would encourage him to talk to his PSO to go more in depth.
« Last Edit: January 17, 2023, 02:10:17 PM by tommyboy74 »
Current Ball Arsenal
Heavy:
MOTIV Jackal Legacy
MOTIV Mythic Jackal

Med-Heavy:
MOTIV Trident Odyssey
MOTIV Forge Fire
MOTIV Covert Revolt

Medium:
MOTIV VIP ExJ Sigma
MOTIV Sigma Sting
MOTIV Pride Solid

Medium-Light
MOTIV Venom Shock
MOTIV Tribal Fire

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4331
Re: Solid ball question
« Reply #6 on: January 17, 2023, 02:24:36 PM »
Actually it is the exact opposite.  If he is 16.5 at the pins and 18.5-19 mph at release with only a 275-300 rev rate; then he is speed dominate.  At 19 mph, matched would be more like 450 rpms.  A 300 rev rate bowler would need to be around 16-17 mph to be matched up.  IMO, he needs to practice with slowing his ball speed down.  Being speed dominate and up the back of the ball are a bad combination unless you are shooting at spares.  Being up the back is already promoting a early ball roll.  Combine that with high performance low RG/high diff balls and it just isnt a recipe for success.  If he has little axis rotation and tilt; he would most likely need medium RG balls with high diffs with strong covers (ball like the Fate as an example).

He needs to think less about solid/pearl/hybrid and think more about dropping his ball speed to allow the ball time to go through the 3 phazes and give him some ball motion. 
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

carlos

  • Sr. Member
  • ****
  • Posts: 386
Re: Solid ball question
« Reply #7 on: January 17, 2023, 06:21:35 PM »
Thanks TommyBoy and Two-handed for taking the time to assist him. I'll suggest for him to lower his speed by lowering the ball in his approach for starters. It takes discipline and focus to stay with that approach. I'll pass it on to him. Maybe weaker balls may be the answer on the fresh house shot for him. I'll keep you posted. Thanks again. Carlos