win a ball from Bowling.com

Author Topic: Strongest symmetric ball?  (Read 13527 times)

TeeP Nade

  • Full Member
  • ***
  • Posts: 136
Strongest symmetric ball?
« on: August 31, 2017, 10:59:11 PM »
Any company not named hammer haha looking for the strongest sym ball. My ball speed/rev rate ratio makes me Hate every solid aysym I've ever owned. Just to name a few I've owned, og track paradox, hammer scandal, hammer dark legend solid, roto grip no rules exist. I own a Lindon below ring finger IQ tour edition which for me dosnt seem to exit the pattern as well as I'd like, which at pin below ring puts it at around 3.75 from pap dual angle layout wise. I know aysym tend to exit the end of the patern harder but I've NEVER had success with an aysym. Pearl aysym seem to go to long, and when I change surface they don't got that pearl pop, and don't drive through pins. Seems like my iq is best for heavy even though it shouldn't seeing as it's diff isn't high. I know cover has more to do with it, but just looking at something much more then the iq

 

CoorZero

  • Hero Member
  • *****
  • Posts: 1245
Re: Strongest symmetric ball?
« Reply #31 on: September 02, 2017, 07:27:48 PM »
Longer patterns are different from heavy oil. Longer patterns you want a ball with a quicker response to friction.

Yeah. TeeP, think of it this way: the earlier a ball starts the earlier the energy is spent. This is going to happen with the "strongest" coverstocks for asymmetrical and symmetrical cores. On longer patterns energy would be spent early but with still oil to go through down the lane.

Using a ball that isn't as early, but still strong, gives it more to work with when it comes off the end of the pattern. So for example instead of looking for something like the Dare Devil Trick, go for the Dare Devil. Truth Pearl and Quantum Fire Pearl (or maybe Classic Black) also comes to mind.

This is actually a bit harder to recommend for since ideally I like strong asymmetrical pearl/polish options for longer patterns. There aren't a ton of strong pearl/polished symmetrical balls ideal for longer patterns either. Which might be a good thing in terms of reducing options to pick from.  ;D

HackJandy

  • Hero Member
  • *****
  • Posts: 1321
  • On to greener pastures
Re: Strongest symmetric ball?
« Reply #32 on: September 02, 2017, 07:39:32 PM »
>There aren't a ton of strong pearl/polished symmetrical balls ideal for longer patterns either

Especially since he refuses to even consider the Scandal Pearl which checks that box for me (though I usually remove the polish especially for heavier oil).  Not a Storm fan for example but didn't stop me from getting the Hy-Road because having the perfect versatile benchmark for my style was more important than brand loyalty especially since nobody gives me freebies.  The ball is more important than the brand.
« Last Edit: September 02, 2017, 07:42:14 PM by HackJandy »
Kind of noob when made this account so take advice with grain of salt.

SVstar34

  • Hero Member
  • *****
  • Posts: 5452
Re: Strongest symmetric ball?
« Reply #33 on: September 02, 2017, 08:24:04 PM »
Generally longer sport patterns still have a decent amount of oil where stronger balls can be used. If you have a longer format 5-6+ games then mid range balls come into play.

The symmetric or "more symmetric" options would be: Truth Pearl, Scandal Pearl, Phobia, Tyrant Pearl, True Nirvana, Quick Fix.

Asymmetric options: No Rules Pearl, Inception Pearl, Mako Attack, BW Gold, Gauntlet, Maverick Pearl, Verdict.

TeeP Nade

  • Full Member
  • ***
  • Posts: 136
Re: Strongest symmetric ball?
« Reply #34 on: September 03, 2017, 09:15:17 AM »
thanks for all the imput guys. i'll keep all this in mind! you were all helpful

six pack

  • Hero Member
  • *****
  • Posts: 2799
Re: Strongest symmetric ball?
« Reply #35 on: September 03, 2017, 11:35:08 AM »
keep in mind it all starts with the bowler. I just watched the PWBA last night where they bowled on a 51 foot low volume pattern and they all used very strong balls with rough surface prep. the bowler's that had the best results released up the back of the ball. the bowlers who didn't do well released off the side with more axis rotation. there balls hooked in the heads and when they adjusted in a few boards never sniffed the pocket.
The harder I try the harder they fall

SVstar34

  • Hero Member
  • *****
  • Posts: 5452
Re: Strongest symmetric ball?
« Reply #36 on: September 03, 2017, 02:45:12 PM »
keep in mind it all starts with the bowler. I just watched the PWBA last night where they bowled on a 51 foot low volume pattern and they all used very strong balls with rough surface prep. the bowler's that had the best results released up the back of the ball. the bowlers who didn't do well released off the side with more axis rotation. there balls hooked in the heads and when they adjusted in a few boards never sniffed the pocket.

Which event? I havent seen a pattern that length. A rough surface blows up the heads which can put you in a tough spot on longer patterns

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Strongest symmetric ball?
« Reply #37 on: September 03, 2017, 04:13:15 PM »
keep in mind it all starts with the bowler. I just watched the PWBA last night where they bowled on a 51 foot low volume pattern and they all used very strong balls with rough surface prep. the bowler's that had the best results released up the back of the ball. the bowlers who didn't do well released off the side with more axis rotation. there balls hooked in the heads and when they adjusted in a few boards never sniffed the pocket.

Which event? I haven't seen a pattern that length. A rough surface blows up the heads which can put you in a tough spot on longer patterns
Rochester.
The PBA should use such patterns. Nasty, 51 feet but low volume and low scoring.
"None are so blind as those who will not see."

avabob

  • Hero Member
  • *****
  • Posts: 2778
Re: Strongest symmetric ball?
« Reply #38 on: September 03, 2017, 05:12:10 PM »
I watched the PWBA.  Gals played much further out than I would have expected.  2 lefties pretty much jammed it up 5-7.  Righties did the same thing, but Danielle was a board or 2 deeper.  Guys would have started up 20-12, but still  up the back of the ball

DP3

  • Hero Member
  • *****
  • Posts: 6093
Re: Strongest symmetric ball?
« Reply #39 on: September 03, 2017, 06:34:35 PM »
I just practiced on some 43 ft Kegel pattern and the only thing I could get to hook early enough and carry was a 500 Grit Gamebreaker 2. 3" Pin to axis, no hole. It flares about 7" for me. Surface and is going to be your #1 weapon for the real oil.

avabob

  • Hero Member
  • *****
  • Posts: 2778
Re: Strongest symmetric ball?
« Reply #40 on: September 03, 2017, 09:24:40 PM »
You don't need a ball to hook to hit.  You need to get it in to a roll.  I know it is a listbart, but sometimes it works better to try and play s pattern rather than blow it up.
« Last Edit: September 03, 2017, 09:26:47 PM by avabob »

Impending Doom

  • Hero Member
  • *****
  • Posts: 6288
Re: Strongest symmetric ball?
« Reply #41 on: September 03, 2017, 09:45:38 PM »
You don't need a ball to hook to hit.  You need to get it in to a roll.  I know it is a listbart, but sometimes it works better to try and play s pattern rather than blow it up.

"But, but, I can't stand where I want and get it to bounce off the dry, so I must need moar surface!!"

avabob

  • Hero Member
  • *****
  • Posts: 2778
Re: Strongest symmetric ball?
« Reply #42 on: September 04, 2017, 08:19:11 PM »
Yes, if you can't swing it from 4th arrow to the gutter and get it back, the answer has to be more surface😊

LookingForALeftyWall

  • Hero Member
  • *****
  • Posts: 658
Re: Strongest symmetric ball?
« Reply #43 on: September 05, 2017, 10:20:40 AM »
You don't need a ball to hook to hit.  You need to get it in to a roll.  I know it is a listbart, but sometimes it works better to try and play s pattern rather than blow it up.

"But, but, I can't stand where I want and get it to bounce off the dry, so I must need moar surface!!"

Who tells me that I can't go straight up 5 on a heavy 45 foot pattern with a hang spot at 43 feet?  MOAR MOAR MOAR SURFACE....until I shoot 150 and crawl away...sniffle.

(The above is not to be confused with an actual event that occurred June 7th, 2017.)