win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Ball suggestions  (Read 4784 times)

downstroker7

  • Jr. Member
  • **
  • Posts: 45
Ball suggestions
« on: September 26, 2015, 02:22:15 PM »
I'm looking for ball suggestions for a drier house I'm struggling with. At the other places I bowl I start off around 17-18 with my feet 12-13 eyes. The volume lets me use a Hyper Cell or a Covert Revolt at 2500 the whole night. I tried these balls at the center I am having difficulty and it forces me to start around 27-28 feet 17-18 eyes. I thought weaker balls would allow me back to my comfort zone. I've tried the Salute, Hy-road and Takedown but I'm still about 7 boards left with my feet 4 with my eyes. Any less aggressive ball recommendations that could move me back right?
Logged

 

milorafferty

  • Hero Member
  • *****
  • Posts: 11153
  • I have a name, therefore no preferred pronouns.
Re: Ball suggestions
« Reply #1 on: September 27, 2015, 01:21:45 AM »
I used my Motiv Ascent Apex for exactly what you described. It has the ability to get down the Lane but still finish well.
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

hammajangs

  • Full Member
  • ***
  • Posts: 206
Re: Ball suggestions
« Reply #2 on: September 27, 2015, 01:53:15 AM »
I absolutely love the Storm Ride for those conditions.
Logged

jrs813

  • Full Member
  • ***
  • Posts: 239
Re: Ball suggestions
« Reply #3 on: September 28, 2015, 07:06:27 AM »
take a look at the hammer viral or the blue and black spike.
Logged

tommymo

  • Hero Member
  • *****
  • Posts: 821
Re: Ball suggestions
« Reply #4 on: September 28, 2015, 07:20:56 AM »
Brunswick Strike King sounds like a good fit.
Logged
Tom M.

tuckinfenpin

  • Sr. Member
  • ****
  • Posts: 418
Re: Ball suggestions
« Reply #5 on: September 28, 2015, 08:22:54 AM »
Rack Attack from Radical. I've been very impressed from this ball. Smooth and predictable.
Logged

SVstar34

  • Hero Member
  • *****
  • Posts: 5452
Re: Ball suggestions
« Reply #6 on: September 28, 2015, 05:35:54 PM »
I suggested quite a few to you on your original thread when you asked about the HyRoad and I said that it probably wouldn't be your answer
Logged

downstroker7

  • Jr. Member
  • **
  • Posts: 45
Re: Ball suggestions
« Reply #7 on: September 28, 2015, 05:51:05 PM »
Thanks SVstar34 and all the others who replied. I'd already ordered the Hy-road when I asked the original question. You were right. I drilled it the same as my Salute and it made me move farther left. I put in an order for the Ride.
Logged

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: Ball suggestions
« Reply #8 on: September 29, 2015, 03:52:40 PM »
If the static weights allow you could try a P1 balance hole on the HyRoad.  Start small, say 5/8" diameter and 2 3/4" deep, then increase the diameter as needed.  To locate the hole, first measure 6 3/4" from the pin to a spot about 1/2" left (for a rightie) of the grip centerline (near the thumb hole).  This is a "best guess" mass bias.  Draw in your VAL and measure 6 3/4" from the MB to the VAL - that's your P1 location.  Test the ball initially and after each size increase, I've found that P1 holes have a strong impact on ball motion.  --  JohnP
Logged

downstroker7

  • Jr. Member
  • **
  • Posts: 45
Re: Ball suggestions
« Reply #9 on: September 29, 2015, 08:43:26 PM »
Thanks John p. I think I like the Hy-road as a ball down at the other places I bowl. I'm getting a Storm Ride Thursday. Hopefully this will help me move to the right.
Logged

duvallite

  • Hero Member
  • *****
  • Posts: 703
Re: Ball suggestions
« Reply #10 on: October 01, 2015, 02:12:55 PM »
Quote from: JohnP on September 29, 2015, 03:52:40 PM
If the static weights allow you could try a P1 balance hole on the HyRoad.  Start small, say 5/8" diameter and 2 3/4" deep, then increase the diameter as needed.  To locate the hole, first measure 6 3/4" from the pin to a spot about 1/2" left (for a rightie) of the grip centerline (near the thumb hole).  This is a "best guess" mass bias.  Draw in your VAL and measure 6 3/4" from the MB to the VAL - that's your P1 location.  Test the ball initially and after each size increase, I've found that P1 holes have a strong impact on ball motion.  --  JohnP

John, what kind of effect do you usually see with a P1 hole?
Logged

cory867

  • Full Member
  • ***
  • Posts: 201
Re: Ball suggestions
« Reply #11 on: October 01, 2015, 02:51:06 PM »
Quote from: duvallite on October 01, 2015, 02:12:55 PM
Quote from: JohnP on September 29, 2015, 03:52:40 PM
If the static weights allow you could try a P1 balance hole on the HyRoad.  Start small, say 5/8" diameter and 2 3/4" deep, then increase the diameter as needed.  To locate the hole, first measure 6 3/4" from the pin to a spot about 1/2" left (for a rightie) of the grip centerline (near the thumb hole).  This is a "best guess" mass bias.  Draw in your VAL and measure 6 3/4" from the MB to the VAL - that's your P1 location.  Test the ball initially and after each size increase, I've found that P1 holes have a strong impact on ball motion.  --  JohnP

John, what kind of effect do you usually see with a P1 hole?

weakens the reaction
Logged
- Cory

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: Ball suggestions
« Reply #12 on: October 02, 2015, 05:29:59 PM »
That's right, it reduces the flare and weakens the reaction.  --  JohnP
Logged
Pages: [1]
« previous next »