win a ball from Bowling.com

Author Topic: Hyper Cell Skid  (Read 33480 times)

Ballreviews

  • Administrator
  • Hero Member
  • *****
  • Posts: 543
Hyper Cell Skid
« on: November 24, 2014, 11:06:51 AM »
Ball NPS Score: 100.00
bowling.com has the largest selection of bowling balls
Click here to shop.

Features:

- Color: Black/Gold/Violet (colors may vary from the picture shown)
- Core: Nucleus (14-16#)
- Coverstock: 73MH Pearl Reactive
- Finish: 1500-grit Polish
- RG: 2.52 (for 15# ball)
- Diff: 0.056 (for 15# ball)
- Recommended Lane Condition: Medium-Heavy Oil

 

wknight84

  • Jr. Member
  • **
  • Posts: 17
Roto Grip Hyper Cell Skid Ball Review by Walter McKnight
« Reply #1 on: December 21, 2014, 10:09:26 PM »
Roto Grip Hyper Cell Skid Ball Review by Walter McKnight


Lane Conditions: Medium-Heavy Oil
Typical Conditions: Variety of Shots
Type of Lane: Combination
What part of the lane did you play? Third Arrow
Did the ball track out? Normal
Weight of bowling ball: 15
Surface of bowling ball: Factory/Box
What grit was the surface of the ball? 1500
Likes: It has limitless length. The ball doesn't rip apart the heads. You can play right longer.
Dislikes:

Rotogrip is releasing another benchmark ball. The New Hyper Cell Skid! A ball that gives you the best of both worlds. Extreme length and raw power on the back end. The ball uses the 73 MHâ„¢ Pearl coverstock wrapped around the Nucleusâ„¢ Core. One of the first releases of 2015! We've seen great things from the Cell line over the last few years but this ball tops them all.

I drilled my Hyper Cell Skid 40° x 4 3/4 x 40° pin above the ring finger. I Wanted to optimize the core and cover and let the ball do most of the work. I can use this ball on Heavy to Medium conditions without a problem. It all takes surface adjustments very well. It's a great compliment to the Hyper Cell.

I would suggest this ball for anyone looking for a strong backend reaction late. This ball stores everything for the end and has minimal mid lane read. It's a true representation of SKID- Flip motion



caseyccg

  • Full Member
  • ***
  • Posts: 180
Hyper Cell Review by Staffer Casey Murphy
« Reply #2 on: December 26, 2014, 09:18:02 AM »
Roto Grip Hyper Cell Skid Review by Casey Murphy

Orientation:  Right Handed
Rev Rate:  375 RPM
Speed:  16-17 MPH
PAP:  4 5/8 straight across

Location:  Enterprise Park Lanes, Springfield MO
Pattern:  High Volume THS
Layout:  40, 4 ¾, 70 with p1 hole

The Hyper Cell Skid is exactly what you want it to be.  It’s a pearl Hyper Cell.  Same great “Cell” roll, except cleaner through the heads and much more backend.  If you liked the Hyper Cell, you’re going to love the Hyper Cell Skid as the perfect complement on drier lanes.

I drilled my pin down to control the motion down lane and I love it.  It doesn’t try to read too early even with the stronger layout, which allows me to use it on multiple lane conditions, not just super heavy oil.  Much like every Cell series ball I’ve thrown, the Hyper Cell Skid gets into that predictable heavy continuous roll that core is famous for.

If you love Cells, the Hyper Cell Skid is a must have!

yellowdog07

  • Jr. Member
  • **
  • Posts: 39
Re: Hyper Cell Skid
« Reply #3 on: January 13, 2015, 02:14:40 PM »
Weight:  14 lbs.
Pin Length:  3 ”
Drilling:  30X4X30
Pattern Length:  40 ft.
Pattern Volume:  Medium
Pattern Type:  Modified House, THS
Right Handed

The HYPER CELL SKID has the proven Nucleus Core from the popular CELL line, and the 73 MH pearl reactive cover stock.  This is a great combination and packs a lot of punch on the back end.

I have used the HYPER CELL SKID on house patterns, and modified house patterns.  With a minor surface change, I was able to use this ball on different patterns.

For our 39 ft. THS, I’ve had much success using the HYPER CELL SKID at 2000 grit, no polish.    It gets through the heads very smooth, and has a strong turn to the pocket, continuing through the pins.  As the pattern broke down, I was able to make a lateral move in with the HYPER CELL SKID and did not lose carry on the corner pins. 

On our modified house/tournament shot, I brought the cover back to the 1500 grit box finish with no polish, and it was plenty of ball for the shot.  I had no trouble getting the corners out.  It had plenty of energy on the back end, even with the little extra surface on it.

This  is a very versatile piece, that can be used on a variety of oil patterns with just some slight surface changes.  If you were a fan of the CELL line years ago, and/or the newer HYPER CELL, you should consider this ball.   It is a good ball to switch to when the HYPER CELL becomes too strong for the breakdown.

Carol Teel
Roto Grip Amateur Staff Member

sk8shorty01

  • Jr. Member
  • **
  • Posts: 15
Hyper Cell Skid - sk8sbowlingreviews
« Reply #4 on: January 14, 2015, 03:21:44 PM »
Lane Conditions: Medium-Heavy Oil
Typical Conditions: Variety of Shots
Type of Lane: All Synthetic
What part of the lane did you play? Third Arrow
Did the ball track out? Normal
Weight of bowling ball: 15
Surface of bowling ball: Factory/Box
What grit was the surface of the ball? 1500
Likes: - Good energy retention - Easily creates entry angle - Color Pattern (easy to see ball motion)
Dislikes: - None to date

The Hyper Cell Skid is the latest release from Roto-Grip in their HP4 Line, the top line in their arsenal. I chose to drill my Hyper Cell Skid with one of my favorite layouts (45x5x45) which has been a benchmark layout for me and I was definitely not disappointed.

The Skid reminds me a lot of the motion I saw out of the Roto-Grip Cell Pearl, arguably one of the best asymmetrical pearls to ever be released, and that is something I really liked right out of the box. The motion this ball creates is just so clean through the fronts and easily creates enough entry angle down lane that as the bowler chases the oil pattern inside it will not have a problem getting those corners out.

I think the Hyper Cell Skid will suit a wide range of bowlers because of its aggressive coverstock and weight block, however I think it will fit really well for bowlers with slightly softer speeds or bowlers that tend to have issues with a ball not having enough recovery (pop) down lane with most equipment. This ball has shined for me so far and I don't see that stopping any time soon!

I have used the Skid on quite a few different patterns and felt it worked well on most of them, however I did feel that it performed on higher volumes slightly better when I knocked some of the polish off of the surface. For the Typical House Patterns I thought the box surface was exactly what I needed it to be, as I felt it allowed me enough length to clear the heads but still had enough teeth to transition in the mid lanes. I was also pleasantly surprised just how many games I could use the Hyper Cell Skid for without it being too aggressive for the pattern, even on the lightest of oil I was able to get the ball to hold line pretty well.

Overall I think the Hyper Cell Skid is going to be a great ball for many bowlers out there, it seems to match up well to just about any style. I would be surprised if it was not in the running for 2015 Ball of the Year based on my experience with the ball over the last month.

Michael Bauer
sk8sbowlingreviews
PBA Member
Storm Amateur Staff Member
BowlersMart Staff Member
Logo Infusion Staff Member
www.youtube.com/sk8sbowlingreviews

BowlersDeals.com

  • Jr. Member
  • **
  • Posts: 35
Re: Hyper Cell Skid
« Reply #5 on: January 15, 2015, 03:24:11 PM »

COMMENTS

Roto Grip Hyper Cell Skid
Introducing the latest ball into the HP-4 line, Hyper Cell Skid. This ball is a great compliment to the Hyper Cell and the Sinister. When either of those balls start to over hook or hook early, you can pull out the Hyper Cell Skid, and it will give you great length with a strong continuous motion in the backend with still reading the mid part of the lanes.

The Hyper Cell Skid uses the ever popular Nucleus core derived from the original "Cell" wrapped around by the 73MH Pearl Reactive Coverstock. With this core/ coverstock combination, I was able to see a strong motion but with a more longer transition and sharper breakpoint. I used this ball on a variety of conditions. At Team USA Trials, I was able to use this ball on the later games on almost every pattern. I was looking for a ball that got down the lane but still didn't push past the breakpoint and would hook off the spot. This was definitely the ball of choice. This ball reminds of a stronger Totally Defiant which was the ball of the year in 2013. I think Roto Grip has hit a grand slam in the HP-4 Line.

Out of box, the Hyper Cell Skid comes at a 1500 grit factory polished finish. This finish helps when the lanes start to get into a transition and your stronger balls start to hook off the spot. I have also adjusted the surface on this ball to a lightly hand sanded 3k finish to get my ball to not flip so hard off the spot and read the lanes a little sooner. This really helped me out on tougher lane conditions. Roto_Grip_Nucleus_Core_Cad_rgb__60994.1384042303.1280.1280 copy

If you are looking for a ball to be a step down from your most aggressive ball in your bag, this is the ball for you. This ball will compliment everyones bag and suite all styles of bowling.
Based off performance, I will give the Skid an "A." Based on the cosmetics of the ball, with the Purple, Gold, and Black color combination, I absolutely love the looks on this ball. Everyone knows its a Hyper Cell Skid rolling down the lane. "A+" on the looks of the ball.

Visit our website for more information: BowlersDeals.com

Thanks for reading this review and hope you stay tuned for future reviews,

Joshua Tajiri

BowlersDeals.com Technician

Storm/Roto/Vise Amateur Staff

BowlersDeals.com- The Best Deals in Bowling
Joshua Tajiri (Technician)

rotogrip_rick

  • Hero Member
  • *****
  • Posts: 693
Re: Hyper Cell Skid
« Reply #6 on: January 27, 2015, 10:45:30 AM »
Ball: Hyper Cell Skid
Layout: 60 x 4 x 35 - box condition
Test pattern: 41ft THS and 39ft sport pattern high volume - HPL lane surface with Kegel FLEX machine using fire and ice oil.
Results: The ball reaction was a little later then I expected. The angle entry was good and sharp and the performance in the mid point of the lane reminded me of the Totally Defiant and the Cell Pearl, but with a more aggressive finish and angle in the pocket. I was more comfortable to play outside of the track area on both patterns due to the overall length this drilling and allow the ball to transition well off of the pattern. I did tinker playing between 4th and 5th arrow, and I was surpised it did not burned up and retain good hitting power thru the pin deck. This ball does not quit and I feel it will be a bench mark ball for a number of bowlers.

Sheabitt

  • Jr. Member
  • **
  • Posts: 5
Hyper Cell Skid Review - Shea Bittenbender
« Reply #7 on: January 28, 2015, 07:23:36 AM »
Lane Conditions: Medium
Typical Conditions: House Pattern
Type of Lane: Synthetic
What part of the lane did you play? Fourth Arrow
Weight of bowling ball: 15
Surface of bowling ball: Factory/Box
What grit was the surface of the ball? 1500
Likes: Length and Predictability
Dislikes: None

I have always been weary of asymmetrical cores until I got my hands on a Hyper Cell.  I tried a few different asymmetrical pieces such as the Sync and Byte from Storm but nothing compared to the reaction I got from the Hyper Cell.  The Hyper Cell Skid rolls just as good and in my opinion is the best ball with an asymmetrical core and pearl cover on the market.  It’s pretty much the perfect complement to the Hyper Cell. The Nucleus Core is an astounding piece of work.  The continuous roll that I get is something I have not seen in a long time. 

I drilled my Skid the exact same way as my Hyper Cell. Both balls are 4-4.5 inch pins.  I have the pin located above my ring finger with the CG kicked out a low hole.  This past weekend I bowled on a house pattern that was 44 feet.  As my Hyper Cell was too much per most house patterns in St. Louis, I wanted to see how the Skid would fair.  The Skid rolled great.  It got through the heads super clean and had a very controlling and predictable roll.  It also picked up in the flooded middle.   

Overall I would rate the Hyper Cell Skid as nothing short of phenomenal.   It’s a must have for medium to heavy oil patterns when the heads start to go or even on the fresh for higher rev players.   Roto Grip does it again!
« Last Edit: January 29, 2015, 07:33:02 AM by Sheabitt »

FDGunner01

  • Jr. Member
  • **
  • Posts: 61
Re: Hyper Cell Skid
« Reply #8 on: January 29, 2015, 10:43:58 AM »
Lane Conditions: Medium
Typical Conditions: House Pattern
Type of Lane: Synthetic
What part of the lane did you play? Around 3rd
Weight of bowling ball: 15
Surface of bowling ball: Factory/Box
What grit was the surface of the ball? 1500
Likes: Length, Predictability and Hitting Power
Dislikes: None

Went with my favorite layout for this one... 45 x 4 1/2 x 30. Overall reaction was exactly was I was looking for... Cleared the fronts very well, with a solid read of the mid lane and the nice heavy roll off the back of the pattern and kept the pins low.

For the first game I started just outside 3rd arrow with a little bump out to about 8-9 and stayed firm with my speed... and then just kept moving left as the lanes broke down and opened my angles up a little more... I must say that I did have to make moves a little sooner then what I thought I would have to... but then again this isn't a ball for THS... 2nd game I moved left about 3 and 3 and still had a great look.. however by the end of the game I was already needing to chase the oil left again... Moved another 3-2 left and found it again to start the 3rd game... but then had to put it away about half way through and ball down... Games 258-236-225

For me this ball is a monster on a THS and a great compliment to my Hyper Cell that I already have... but I would  recommend this ball to anyone that wants a strong asym pearl... I feel that this will be great on the longer heavier patterns.

bowlerman147

  • Jr. Member
  • **
  • Posts: 42
Re: Hyper Cell Skid Ball Review By Storm Pro Shop Staff Member Matthew Kemper
« Reply #9 on: February 17, 2015, 09:39:46 PM »
LANE CONDITION
Lane Type: Wood

Length: 41ft

Volume: 21ml

Type (THS, Sport Pattern etc): THS


COMMENTS

Likes:Very clean through the heads, recovers great down lane, carries through the pins well

Dislikes:none

The Hyper Cell Skid is Roto Grips newest HP4 Line Pearl Ball.  It is the pearl compliment to the Hyper Cell.  The Box finish is 1500 grit polished which gives it a nice clean look through the fronts and mids and a very strong finish down lane.

I drilled my Hyper Cell Skid with a 50x5x34 layout.  My ball speed is about 15.5mph and my rev rate is about 350.  My goal with this ball was to find a strong pearl that I could play the inside part of the lane and have the ball not die out.  I can honestly say I succeeded.  The Hyper Cell Skid gets through the front part of the lane real clean and it conserves so much energy that the backend reaction is ridiculous.  Depending on the volume and length of the pattern, this will be a great ball from all angles on the lane.  I have thrown it anywhere from second arrow to 5th arrow and the hitting power is strong.  I have thrown a Roto Grip Deranged and a Storm Optimus and this is by far the best reacting ball of the three from inside third arrow and beyond.  I would recommend this ball for any style of bowler for medium heavy to heavy oil lane conditions. 
PICTURES AND/OR VIDEOS

StoRoto2013

  • Full Member
  • ***
  • Posts: 119
Re: Hyper Cell Skid
« Reply #10 on: February 25, 2015, 06:17:12 AM »
LANE CONDITION

Length: Various lengths

Volume: Various Volumes

Type (THS, Sport Pattern etc): Various Patterns


The newest release in the HP4 line is the Hyper Cell Skid.  The Hyper Cell Skid has a pearl cover stock 73MH that is wrapped around the legendary Nucleus C ore.  The motion of the Hyper Cell Skid is some serious length with an aggressive move at the break point.   If you ever thrown the Cell Pearl it is that ball on steroids!

The layout that I used on the Hyper Cell Skid was 75 X 5.5 X 75 or pin under the fingers with the mass bias down by the thumb with no extra hole.  My coordinates are 5 5/8 over and ¾ up for my PAP, Ball speed is medium, Rev Rate around 300 and I am right handed.  I will compare the Hyper Cell Skid to the Hyper Cell and also the Totally Defiant.  Before I go any farther, I could not find a long oil pattern to test the Hyper Cell against the Hyper Cell Skid.  So in other words, the Hyper Cell is going to be rolling early on all of the patterns tested.  I was able to throw all the bowling balls on a fresh house pattern (roughly 36 feet), a broken down house pattern and a medium sport shot type pattern (40 feet in length).  The first thing that I noticed was the length and strong/aggressive move by the Hyper Cell Skid.  It did not jerk as much at the break point like the Totally Defiant and was not as smooth as the Hyper Cell’s backend motion.  That was on all the patterns!  The fresh house pattern always gives me trouble because of the wet/dry.  The Hyper Cell being a solid and dull give me the pocket but if I got it too far right it burned up.  The Totally Defiant was Highlight reel…. Either a 2-8-10 or big four reaction and made my angles to the pocket uncomfortable.  The Hyper Cell Skid was a good blend not too early and not too much.  The Hyper Cell Skid allowed me to move right and play the oil line and made it look like a house pattern miss in it held missed right it recovered.  Really where the Hyper Cell Skid excelled was when the pattern started to break down and had to move left.  The Skid was predictable but still had enough power to go through the pins.  The Hyper Cell Skid outclassed the Totally Defiant and the Hyper Cell.  The flatter sport shot pattern the Hyper Cell with its continuous motion throughout the lane kept my lines comfortable but started to roll too early.  The Totally Defiant was a touch too sensitive in the mid-lane and backend.  The Hyper Cell Skid provided a good blend of length and backend motion. If you own a Hyper Cell and you wanted more length and backend reaction than the Hyper Cell Skid is your ball of choice.  A good one two punch.

OWNIT!



Likes: Decent length with an aggressive backend

Dislikes:


PICTURES AND/OR VIDEOS
Daniel Schaden
Storm/RotoGrip Pro Shop Staff
Vise Grip Staff Member since 2002
Bowlers Corner Pro Shop since 2002

rotostar13

  • Jr. Member
  • **
  • Posts: 43
  • "clear eyes, full hearts, can't lose"
Re: Hyper Cell Skid
« Reply #11 on: March 14, 2015, 11:49:39 PM »
Lay out-pin above bridge, cg kicked out 2 inches, mb parallel with my thumb, 5 inches to the right , half inch weight  hole in thumb quadrant,

Lane-40 ft house, pro avilane  surface

What I wanted- I had a glaring  hole between my sister and hysteria and this ball plugged it up completely. Such an amazing piece. Clean thru the heads and turns on the power in the backend.  The ball is very smooth and continous thru the pins, keeping them low increasing carry.

If you don't have one, see your local pro shop soon. You won't be disappointed.

Roto Grip - Own It
Charley Burge
Hammer staff member

PJ Haggerty

  • Full Member
  • ***
  • Posts: 187
Re: Hyper Cell Skid
« Reply #12 on: March 20, 2015, 04:20:43 PM »
Hyper Cell Skid Ball Review by PJ Haggerty

   If you are a fan of the Hyper Cell, this is a perfect step down.  I typically use my Hyper Cell when I’m bowling on heavier volume patterns or am trying to find a slower response time.  The Hyper Cell Skid is a ball that is much cleaner and does have a quicker response time.  The beautiful thing about the Skid is the asymmetrical core that does not change direction too hard.  It’s very, very controllable down lane and takes surface very well.  I used a 2000 pad by hand to make the Skid read the lane a hair sooner, but also slow down the response time a bit as well.  Even with applying that surface, the Skid is still very clean and much different than the original Hyper Cell. 

   I’ve only drilled one so far and LOVE it.  It’s in my bag everywhere I go and I’ve used it on many different conditions.  My Skid is drilled as so: 4.5 x 3 x 55 with a tiny hole in the P2 area.  It provides me a very smooth and predictable motion with a medium response time.  I think it’s necessary to scratch the surface a bit depending how early you want the ball to read the lane.  When the Skid is shiny – it can be VERY clean.   I have close to 100 games on it so far and it still looks great.  A great piece for many sport and PBA patterns and of course looks great in league! 

   Go Drill a Hyper Cell Skid if you are looking for a pearl asymmetrical piece that
can go anywhere with you!!

#OwnIt

tommygn

  • Hero Member
  • *****
  • Posts: 694
Re: Hyper Cell Skid
« Reply #13 on: March 23, 2015, 01:21:30 PM »
The Hyper Cell Skid is the pearl accompaniment to the Hyper Cell. The Hyper Cell Skid has an RG of 2.52, a differential of 0.056, and an intermediate differential of 0.018 in  15lb balls. The Skid has great shelf appeal with it's black, gold, and violet color combination. The Skid comes from the factory with a 1500 grit polish. I drilled my Skid with a 5x5.5x2.5 layout. There wasn't a need for an extra hole to make it legal.
The Hyper Cell Skid covered a lot of boards for me with the factory finish. The layout and drill combination forced me very deep on the lane, and didn't give me the best ball reaction on our house condition. I decided to sand the cover with a used 1000 grit abralon pad, and had a ball that hooked the entire lane, and was more suitable for heavier volumes of oil.  I then went back to the ball spinner and smoothed the cover out with Storm step #2, getting it back closer to factory finish and then topped that off with some Storm Reacta Shine. I was able to move back left with the Skid, and had a great step down reaction from my Sinister. I was able to use the Skid on a 43 foot sport pattern, as well as house conditions, while keeping my angles a little more direct with such a polished surface. Changing the cover gave me the reaction to the lane that I wanted to see, and made it a more usable ball on a multitude of patterns. It's very important to make sure you adjust the coverstock of a bowling ball, so that it fits your own style of bowling, and lane play. By adjusting the cover, I went from a ball that would have been very condition specific, to a ball that I can use on almost everything but the extremes. The Skid also compliments my Asylum very well. I can start with the Asylum on the fresh and play the pattern a little more square; and when I need to make a  move in because the surface of the Asylum has broken down the pattern, the Skid reacts perfectly by opening up the lane, giving me recovery from the stronger core.
The Hyper Cell Skid is a great ball, that has it’s place in any arsenal. If this is the only ball that you would carry, make sure that you are bowling on a longer pattern, that has some hold built in to the pattern shape. This ball really has a strong continuous move in the backend of the lane.
Thank you for taking the time to read my review of the Hyper Cell Skid. Don’t forget to OWN IT!!
God creates us with a blank canvas, and the "picture" we paint is up to us. Paint a picture you like and love!

StormRoto

  • Hero Member
  • *****
  • Posts: 1076
Roto Grip Hyper Cell Skid Review by Brian Watson
« Reply #14 on: March 28, 2015, 10:25:46 PM »
           The new  ball in the Roto Grip HP-4 Line is the Hyper Cell Skid.  This the pearl version of the Hyper Cell.  The Skid still has the great Cell roll.  Also has a lot more backend.
I drilled mine 4 1/4 x 4 x 1 1/2 or 40 x 4 1/4 x 35.  Very similar layout to my Hyper Cell.
Very good compliment the the Hyper, as just gives me that extra length and more tip at the back to get the corners out.   During a couple Storm Matchmakers the Skid was a very popular ball, as all styles liked the motion they got from the Skid. 

Right Hander
PAP - 4  up 1 1/4
Tilt - 15
Rev - 400
Speed - 17

Brian Watson
Pro Shop Staff