win a ball from Bowling.com

Author Topic: RST X-3  (Read 10758 times)

BallReviews-scodaddy21

  • Administrator
  • Hero Member
  • *****
  • Posts: 964
RST X-3
« on: September 16, 2022, 04:39:37 PM »
Continuing the success of the RST X high-performance bowling balls Roto Grip took the same core and wrapped it in the hybrid version of the MicroTrax reactive coverstock. This coverstock uses nano particles all over the ball to achieve the traction needed in medium to medium/heavy oil conditions to provide great mid-lane motion and plenty of energy down lane. The combination of the RST core and the MicroTrax Hybrid Reactive coverstock creates a ball that is well suited for a wide range of bowlers.

Color: Yellow/Smoke/Grape
All colors do vary somewhat from the picture shown
Core: RST Core (Roto Star Tour Core)
Coverstock: MicroTrax Hybrid Reactive
Finish: 4K - Fast
RG: 2.53 (for 15# ball)
Differential: 0.053 (for 15# ball)
Recommended Lane Condition: Medium – Medium/Heavy Oil
Hook Potential: High
Length: Middle

 

Onefrombills

  • Full Member
  • ***
  • Posts: 121
Re: RST X-3
« Reply #16 on: October 28, 2022, 04:06:15 PM »
RST-X3 Ball Review
Hey everyone, I'm back with another ball review, and this time it's for the Roto Grip RST-X3 and in 15 pounds this ball is wrapped in the Micro Trax Hybrid cover stock and comes at 4K Fast with an RG of 2.53, Diff of .053 and A MB of .016 with a layout of 4X4X2
It is very easy to say how pleased I am with this ball. If you had thrown the original RST-X1 or X2 this is everything that ball is and with the hybrid cover, you get that clean motion in the heads. A great ball for that medium to heavy oil condition. The X1 and X2 are a great combo, and I can see where the balls will fit within the same bag.
BOWLER STYLE: RH - Power Stroker Rev Rate: 320 Ball Speed: 15-16 PAP: 4 7/8 right 5/8 up.
#Storm #SquadRG #900Global #VISE #BowlersChoiceProShop #BabesAndBallsBowling #LogoInfusion #IAmBowling (coupon code HIRSCH 20% off at checkout)
YouTube Channel: https://www.youtube.com/channel/UCVgKzdcnglpcCjAVFMBiVNg
Brian Hirsch
Storm Amateur Staff #StormNation
Vise Amateur Staff #Vise
I Am Bowling Staff #IAmBowling (HIRSCH gets you 20% off)

woelfelzp15

  • Jr. Member
  • **
  • Posts: 60
Re: RST X-3
« Reply #17 on: October 29, 2022, 08:49:10 AM »
Hook in a box! The all new RST X-3 is going to be an excellent addition to the HP4 line. The RST X-3 features MicroTrax Hybrid Coverstock wrapped around the same RST core that we all love. This ball is able to combine all the great parts of the Gem with the versatility of the Idol Helios. This ball is strong and controllable like the Gem and it is versatile and angular like the Helios. This ball can do it all, if you are looking for a strong asymmetric ball that you can use on a variety of patterns look no further than the RST X-3. Go out and get yours today!

rotogrip_rick

  • Hero Member
  • *****
  • Posts: 704
Re: RST X-3
« Reply #18 on: November 03, 2022, 12:28:55 PM »
Roto Grip RST X-3: RST core with MicroTrax Hybrid cover stock with 4K fast /exceptionally light polish. The layout is 60 x 1 ½ x 65.
Currently using it on a 46ft THS that was a BIG cliff on the back of the pattern and not really blended well front to back and side to side. Super dry outside of 12 and super heavy conditioner between 16 to 16 across the boards.
Comparing it to the RST X-2, the movement is early in each part of the ball motion due to hybrid cover versus pearl cover, which is understandable and expected, BUT the main difference is that the X-3 still has a good bit of angle into the pocket, where the X-2 tends to be super over/under reaction because the pattern is not blended well. The X-1 had too much early movement and would lose most of its momentum because it would try to “dig in” too much in the front of the pattern and the heads. I changed the surface to 2000ab to see what the difference was and there really was not much difference in the movement, the ball does look better with the increased lane shine at 2000ab over weeks of using it. I call this core ASYS-LITE, because it is on he “lighter side” of ASYS cores out there and gives me a smoother reaction that other ASYS cores.

cmattingly

  • Jr. Member
  • **
  • Posts: 84
  • #StormNation #OwnIt #TurboGrips
Re: RST X-3
« Reply #19 on: November 07, 2022, 11:44:14 AM »
LANE CONDITION

Length: 43'

Volume: 22.5 mLs

Type (THS, Sport Pattern etc): THS

WOW, The X3 is nothing like the X1 or X2.  The X3 is definitely the most angular of the 3.  With the factory finish the X3 makes me get further left that I want to be with it, causing it to wiggle off the spot.  Adding surface definitely helped the reaction, allowing me to be more successful and see the shape that I needed.

The X3 definitely has elite shelf appeal!  I have already sold  a lot of them out of my pro shop, not to mention that it matches up with the house shot here pretty well.

I have seen/heard this ball rolls well on more difficult patterns as well.  Nate Garcia drilled his with a 3-3/8’ pin to pap and says that its “Super Chuggy.” Excellent when you are dealing with extra volume in the heads!

My Layout is: 4x5.25x2

Other balls getting a lot of play:
Dark Code-4x6x2
Night Road-4.5x4.5x3.75
Idol Cosmos-4x5x2
Wolverine Dark Moss-4.25x5.25x2


COMMENTS

Likes: versatile cover!

Dislikes: reaction out of box


PICTURES AND/OR VIDEOS
Casey Mattingly
Storm/RotoGrip Staff
Turbo Regional Staff
Coach's Corner Pro Shop
Alexandria, IN

TonyMarino

  • Full Member
  • ***
  • Posts: 128
Re: RST X-3
« Reply #20 on: November 14, 2022, 12:17:17 PM »
I don’t normally do this type of thing in my reviews but let me just come out and say this… THIS IS WHAT A HIGH END HYBRID BALL SHOULD BE!

The X-3 has the MicroTrax Hybrid cover which 2:1 pearl:solid hybrid cover. From what I’ve seen, the X-3 is earlier than the X-1 and more forward, and obviously also earlier and stronger than the fully pearl X-2.

With a highish 2.53RG and diff of .053, this ball is designed to be a step down from your Gem, Reality, or Infinite Physix. The X-3 fills a gap for me in my bag for sure. I struggled to find the right ball to go to after the Reality, because most of the time I am still looking for an asymmetrical shape but nothing quite fit the bill UNTIL the RST X-3! Mine is drilled 4.5x5x2.5 and I am debating on drilling a 2nd one. What I see out of the X-3 is it is strong and versatile enough to play up the lane or be the piece to go to after the big dull ball has made the lanes transition but it is not yet time for a ball like the Idol Helios.

caseyccg

  • Full Member
  • ***
  • Posts: 194
Roto Grip RST-X3 by Casey Murphy
« Reply #21 on: November 18, 2022, 09:27:06 AM »
Orientation:  Right Handed
Rev Rate:  400 RPM
Speed:  16-17 MPH
PAP:  4 ½ over and ½ up

Location:  Enterprise Park Lanes, Springfield MO
Pattern:  High Volume THS
VLS Layout: 
Layout 2:  4 ½ x 4 x 4 1/8 (pin below bridge)

My X2 created a motion I’ve never seen before.  I couldn’t throw it a ton though because it was SUPER clean. 

My X3 is stronger/earlier and creates that same reaction on more volume.  That means I can use it a TON more than I was able to use the X2.  My X3 is pin down and it creates a LOT of midlane.  I can throw it to the friction for days and it comes off the spot easily and strong.  It’s that same X3 motion just 5 feet  earlier on the lane, which makes it much more usable. 

Sandy McIntire

  • Jr. Member
  • **
  • Posts: 29
Re: RST X-3
« Reply #22 on: November 22, 2022, 08:57:47 AM »
I drilled the RST X-3 with a 40x4x30 layout to allow the ball to pick up early in the front part of the lane, with high flare potential, and quick/continuous response to friction. I am higher speed, rev challenged 220-250ish, high tilt, high rotation, and super low track player. The RST X-3 has been my go to game 1 ball this league season. The ball is strong enough to pick in the in fresh higher volumes of oil while retaining enough energy to come off the spot hard.

Gil B

  • Jr. Member
  • **
  • Posts: 49
Re: RST X-3
« Reply #23 on: November 26, 2022, 09:58:22 AM »
The RSTX3. My Layout 4x4x3. Another great color scheme on the Roto Grip Side. This ball for me def needed some games on it and some lane shine before I really liked what I saw. Out of the box it was a little too soon. But with some lane shine it got me where I like to see my breakpoint. Down lane for me this ball had a unique move and stop motion I am loving. Plus this ball really gets through the pins which is rare when the ball really slows down. This ball is def a ball with a permanent spot in my bag

HollyannJohansen6919

  • Newbie
  • *
  • Posts: 2
Re: RST X-3
« Reply #24 on: November 27, 2022, 09:51:15 PM »
RST X-3 5 1/2 x 4 x 3
This is my first experience with the RST line and has become a heavily used ball in my arsenal. The RST X-3 out of box picked up the front of the lane too early for what I was wanting to see out of it so I changed the surface to 4000 polished. I wanted this to be the first shiny ball out of my bag after my Hustle USA and Zen Master especially if the front of the lane was already hooking. If I need anything cleaner the next step for me is the Hyped Hybrid.

jshoe97

  • Jr. Member
  • **
  • Posts: 79
Re: RST X-3
« Reply #25 on: November 29, 2022, 04:18:32 PM »
Hey everyone, this is Storm staff member Josh Shoemaker here again with another ball review for the brand new Rotogrip RST-X3. As always, I would like to thank Storm for providing the equipment I use everytime I step out onto the lanes and I Am Bowling for making sure I always look good no matter what! Today I will be bowling on an unknown long pattern. This pattern feels medium volume and somewhere in the realm of 46-48’ in length. The X3 features the same RST core found in the previous two balls but is now wrapped in MicroTrax Hybrid. The MicroTrax hybrid cover on the X3 is two parts pearl and one part solid whereas on the X1 it was two parts solid and one part pearl. Where this may not sound like a huge difference, it’s very evident on the lanes. MicroTrax is a cover that responds very well to surface changes and has rolled well for me lane shined all the way down to 500. The X1 for me was a great ball to use when the lanes were cliffed but there wasn’t enough volume for some of the bigger and slower pieces. The X2 was night and days different from the X1. The X2 liked steep angles and tons of friction. The X3 falls perfectly in between the two and will bridge the massive gap perfectly. I see myself throwing the X3 a lot with a little bit of surface during league on the fresh or games 3-5 during a longer tournament block. Be sure to stop into your local Storm VIP pro shop and pre order your very own RST-X3 for the August 19th release!



Review Video: https://youtu.be/g9JgxijDDfg

Bigmike

  • Hero Member
  • *****
  • Posts: 1068
Re: RST X-3
« Reply #26 on: November 29, 2022, 08:54:33 PM »
I drilled up my RST-X3 with a 4.5 x 3.5 x 2 VLS layout. I have thrown it box (4K-Fast) and touched it with a 2000 pad also. I have thrown this on mostly PBA50 patterns in the longer range like the 46 ft and 44 ft patterns.

This is the real deal for me when it comes to send it right and watch it come back hard. I have an INFINITE PHYSIX that hooks quite a bit and the X3 is there step for step and maybe even harder on the back. Compared to my stronger cover solid balls like the SUPER NOVA, this is a great step down with big motion.
"Tell me Cup, how does a great ball striker like you shoot an 83? Well I lipped out this putt on 18......"

Mike Craig - Storm Bowling Amateur Staff - Westerville, OH

MANCSTORM

  • Jr. Member
  • **
  • Posts: 56
Re: RST X-3
« Reply #27 on: November 29, 2022, 10:26:10 PM »

Took a little time to get used to the colors but definitely became a mainstay in my bag for anything with some volume. I can blend over under with it on house but mostly it shines for me on tougher patterns with volume. Even with all the control it gives me it's amazing how it goes threw the pins. An absolute winner.

peterdohanjr

  • Jr. Member
  • **
  • Posts: 52
Re: RST X-3
« Reply #28 on: December 08, 2022, 11:34:21 AM »
Roto Grip RST X-3 Ball Review

Bowler Stats:
Speed: 15.5 MPH
Rev Rate: 300 RPM
Tilt: 3-5 degrees
Axis Rotation: 60 degrees
PAP: 5 ⅜ over 1 ¼ up
Layout:  5 X 41/2 X 23/4 VLS

With the release of the third installment in the RST line I was curious how close this ball would be to the RST X-3 since they were both hybrid covers. The RST X-1 has more solid as the base and the R-3 more pearl. When I drilled the X-1 I was expecting a replacement piece for the original Physix but the X-1 was stronger and smoother or slower than the Physix. I drilled the X-2 with a weaker layout and the pearl cover was too clean for me to use on a regular basis in my arsenal.

After using the RST X-3 in league around town on the local house shots it's becoming one of my favorites to use. For me it's earlier than the Infinite Physix and more sharper off the end of the house shot than the Reality Check. I did a slight adjustment to the surface to 1000 abralon by hand and just let it shine up and haven’t changed the surface since. I have rolled to 300s with it on the fresh house shots in both leagues where the 300s were in the third game. This is a good transition ball when you need to move left into the higher volume of oil of the house shot.

I was also able to have success using this ball on the 35’ Del Ballard Pattern during a PBA 50 South Region event.



Pete Dohan
Storm Bowling Amateur Staff
#StormNation