BallReviews

Reviews => Storm => Topic started by: admin on December 31, 1969, 06:00:00 PM

Title: Dimension
Post by: admin on December 31, 1969, 06:00:00 PM
# Color: Red/Magenta/Black All colors do vary somewhat from the picture shown.
# Coverstock: R2Xâ„¢ Solid Reactive
# Weight Block: Continuumâ„¢ Core
# Ball Finish: 2000-grit Abralon
# Flare Potential: 5”-6” (Med-High)
# RG: 16 - 2.49, 15 - 2.51, 14 - 2.55
# Diff: 16 - .49, 15 - .48, 14 - .45
# Fragrance: Fruit Punch

# Description: Enter…a new Dimension. At the heart of the Dimension is the all new, technologically advanced Continuum core, unique in that it merges two identical asymmetric halves 90 degrees, yet creates equal mass displacement (symmetry). Encasing the new Continuum core is Storm''''s R2X, a product of continual evolution and refinement. Send your game into the next Dimension…
Title: Re: Dimension
Post by: Mike James on July 07, 2008, 10:20:45 AM
Bowled with the Dimension the other day....laid out stacked leverage as most of my stuff is...15#lbs...have a Special Agent and Cell for comparisons...considered a stroker with medium rev's...bowled on fresh synthetics..normal house shot...OOB condition....my opinion of the ball is that its very similar the the Special Agent but with more pop on the backend...shreds the rack but all new balls usually do that....not as angular as the Cell but a nice piece of equiptment....very controllable
Title: Re: Dimension
Post by: tommygn on July 18, 2008, 11:01:58 AM
After about a month of bowling, I feel I can give a good review of the new Dimension. This ball is amazing. I drilled the first one (pin 1-2 ball),pin under ring, Cg to the right (over label drill)no extra hole needed. I have a Special Agent drilled the exact same way. I wanted to get a good comparison of the two balls. Over all board coverage was very similar to the special on a fresh house shot. The ball read the front about the same, but gave me a little more length, with more movement on the backend. I found that the ball gave me more recovery when missing out than what the Special Agent does. This is a great go to ball once fresh shots carrydown. I have since altered the coverstock to 1000 abralon to give me a little more read on the 3-1 patterns in the regionals. I was also able to use the Dimension last weekend at the regional in Forest Hill, MD. We bowled on the Chameleon. I was able to start with the Special the first few games, and switch to the Dimension once I got to a few tighter pairs. Had I not switched to a Passion in game seven, and stayed with the Dimension, I would of had a good chance at the finals going into game eight. I was using these two balls left of five all day, but one lane (game five, I had to move into ten because the right lane was so tight from out). The Dimension really was the factor in me going 11 over on the day and getting a check. The scores were low, and the combination of control and raw power kept me  plus for the day. The tighter the pattern played, the better the look the Dimension gave me.

On to PBAX shark pattern on DBL surface. It is as if this ball was designed for me to play in on the Shark. It reads the lane perfect. It doesn't hook too early (thanks to the 2.51 Rg in 15 lbs.), it continues through the mid lane (the strength of the R2X cover), and finishes strong on the backend (the new Continuum core design). I am  really excited to use this ball once we see the Shark pattern on the Regional tour.

The second Dimension, I drilled stronger. I wanted to use a layout to be able to get an extra hole in the ball to see how continuos it is. Normally balls with extra holes hook to early in the heads for my softer release and speed, leading me to change my axis of rotation, thus getting too sideways on the backend. I have not used this one as much, but all signs point to it being the most aggressive ball in the bag. I will have to post later after using this one more.
In closing, this is a great ball for any style player. Don't forget to bowl up a Storm!!
--------------------
Tommy Gollick
Storm Regional/Pro Shop staff
Red Crown Pro Shop Harrisburg, PA
stormbowling.com
Title: Re: Dimension
Post by: blockhater on July 18, 2008, 08:28:51 PM
This is my initial review of the Dimension, having only bowled with it on wood. I used two different patterns as detailed below.

My specs are: 450rpm - medium track - 19mph speed
Ball specs are: Pin above fingers 4.75" from PAP, no weight hole.


I didn't test the Dimension on a house pattern (the one at my centre is way too dry) and I didn't bowl for long enough to get the patterns very burned up. What I did see is the shape of the ball motion would suggest the ball doesn't quit. Despite bowling on high friction wood, the ball kept hooking on the vast majority of shots. Due to the surface and my release inconsistencies, I did have the ball roll out on me a couple of times, but in all honesty I would never use a ball this strong on wood.

I bowled on a version of the 44ft PBA Shark oil pattern along with a 41ft Sport pattern of my own design. Both patterns were difficult with little hold inside nor any free hook to the right. Naturally the longer pattern played a lot tighter.

I started on the 41ft and used the Dimension polished with Storm's Reacta Shine polish. I could play straight up the lane around the 2nd arrow, but having my angles closed down I need some hold to keep the ball online, which the pattern wasn't giving. I was able to open up a little room to the right in this part of the lane, but the ball was too strong to give me miss room inside which I need when I play lanes this way. I moved inside to around the 4th arrow and had more area as the launch angle created some artificial hold. The balls motion was quite smooth through the front, then kicked fairly hard at the breakpoint and kept coming til it hit the pins. The midlane read wasn't as pronounced as I had expected, but I did have polish on the surface.

- For comparison, my best look on the 41ft was with an Attitude Shift with the pin 5.5" from my PAP and underneath my middle finger. This ball/layout combination gave me 'stop' at the back of the pattern which worked well with the brand new Twister pins.

The Dimension really showed its strength on the PBA Shark pattern. Initially the ball was pushing too long with the polished surface, so I hit it with a 2000 abralon pad by hand to get it started a bit sooner. With the polish knocked off the Dimension did exactly what the reviews said it would and hooked strongly through the pins.

The Dimension is going to be a great ball for anybody looking for a lot of hook. Often strong balls have a tendency to be a disappointment as their hook-stop characteristics are not to most players liking, but the Dimension delivers continuous hook through the pins.

I will revise my review when I have more information, but I hope this provides some early insight for people thinking about the Dimension.
Title: Re: Dimension
Post by: n00dlejester on August 05, 2008, 11:57:00 AM
In a word:  Amazing

First, the logistics:
Me - PAP 4.5 inches over, 3/8 inches up.  I am a righty stroker, speeds between 15-17.  
Ball - 16 pounds, about a 3 inch pin with roughly 2.5oz top weight.  I got it drilled 4.5 pin to PAP (pin in ring finger), CG is roughly like, 3 inches to PAP.

I got this ball as a replacement for my dying Paradigm Passion.  I loved that ball, and I didn't like the looks of the Attitude Shift so I went with the Dimension the day it came out.  I tried a pin in ring drilling just to try it really.  

When I first got this piece, the ball would absolutely own medium patterns.  But put it on something slicker, and it just went straight as a dart.  It never turned the corner.  I tried surface down to 1000 Abralon, and still no good.  So I had to go back, and get an X-hole 6.75 inches 45* from my grip center.  Talk about a whole new world.  This ball turns the corner with authority and absolutely CRUSHES the pin deck.  I can honestly say this ball has jaw dropping characteristics.  I've bowled on three "heavy" patterns with it, I'll break them all down.  All reviews are *FROM THE PERSPECTIVE OF THE BALL WITH X-HOLE*

#1:  40ft THS, LOADS of volume and very little difference from 20 to 2 boards.  This THS is usually very tight.  There's a little wiggle room compared to a PBA shot, but if you miss your mark area you'll leave a nasty split more often than you'd carry a strike.  I got lucky last week and it was super fresh shot.  I found myself playing straight up 6-7-8 or there abouts.  The ball reacted perfectly, all three games, never over-reacting to any change.  One thing about this R2X coverstock is honestly it's ability to NEVER EVER over-react, but to read the lanes and blend any over/under there may be.  Carry was amazing.

#2:  41ft Scorpion pattern.  This pattern has completely changed from last year.  I found myself playing this ball straight up 8-9-10 at first, giving me a nice little look.  Then as the oil carried down, I made that my hold area and I moved right to 5-6-7.  I angled it a hair, but my look was there and I scored pretty well on it.  I was quite happy.  The ball couldn't quite cut through the carrydown.  As a comparison, I threw the Passion and the Passion was kicking out that pesky ten pin.  But that spot was too fickle with all that carry down, I stayed right of it to use it to my advantage.  Carry wasn't bad, but I think if I bowl on this pattern again I'd slow my ball down a bit more.

#3:  44ft Shark pattern.  This pattern stayed exactly the same from last year.  I played basically the same line I did last year, but without teh angle.  I found myself straight up 9-10-11 and it was working wonders.  For three weeks I found myself doing very well on the Shark with this ball.  Depending on who else was on my pair, I either moved right with the same ball, or moved right with the Gravity Shift.  The mids got pretty dry since people were using solid on this pattern, and the Dimension started crossing a bit too much.  Switch to my Gravity Shift and you have an amazing 1-2 punch.  Another week, guys were using all pearl balls (don't know why), and the oil carried down a LOT.  I switched to my Passion to get into a roll sooner and it was the perfect compliment to the Dimension, but the other way.  The carry with the Dimension was great on this pattern.  As said in #2, I slowed myself down and the results were there.  The ball took to these hand and speed changes very well.

All in all, the Dimension is AMAZING for anything except the heaviest of the heavy and lighter patterns.  The ball is the absolute definition of skid-hook-oll.  When it turns over, you can see it in the labels and it just absolutely crushes the pins.  I've never seen such solid and consistent carry before.  Pins were just getting hurled around, and I've carried numerous trip 4's and messenger 10's.  The core is a real winner, and it really is very fine tuneable like Storm says: my X-Hole made a WORLD of difference.  The cover is probably the best cover I've ever matched up.  Strong, but never too strong.  I've thrown the Dimension on dryer patterns, and it read the lanes pretty well considering what it is.  Quite possibly one of the best balls I've ever seen.  Storm has a real winner with this core and cover.  I can't wait to see a pearl or pearl particle version of this.

If you have any questions or want to see a pic or two of my ball and the drill, just PM me.  Thanks for reading!


--------------------
Obviously, you aren''t a golfer.
Check out this blog (http://"http://astronsolutionsworldofhr.blogspot.com/")
Title: Re: Dimension
Post by: elvismat on August 08, 2008, 08:25:38 PM
Had this ball drilled 4 1/2 x 4 1/2, with pin under ring finger and weight hole around 40 degrees.  The ball does snap hard when it finds the dry boards and seems to handle carry down decent.

Ball gives decent length, with nice backend.  I left the ball box finish and may take a gray pad, so it will move a little earlier.  I'm a down and in player, with decent hand.  The summer leagues are having more oil than normal, longer with carry down, compared to the fall.  

This is my first Storm ball in a long time and I'm happy so far.  I wanted something to use in Fall Leagues, with readability and great backend.

So far, so good.

I'll post in the future, after using a gray pad.
Title: Re: Dimension
Post by: Rohde800 on August 27, 2008, 08:01:53 PM
ball speed is from 17 to 19 MPH. axis point is 4 9/16 over and 1 /3/16 up and I am left handed rpms is between 450 to 500.  I drill the Dimension 5 x 4 pin is above the ring finger.   The ball gets through the heads very clean and it has a very strong motion, but very predictable off the break point.  Thanks to this ball it is my bench mark ball.  It gives me accucate read on the lanes.  

Billy Rohde
--------------------
Storm  The Bowler''s Company
Title: Re: Dimension
Post by: rabbit on August 28, 2008, 11:46:52 AM
Quite the nugget...
Drilled 60 degree 5.75 from PAP
box finish
reads 3-4 feet sooner than my Epic Odyssey w/4-5 more board swing.
needs oil for sure (heads and mids)...

suggested patterns: tournament conditions (ie. shark, USBC)
house shots: if you play in the "flood" hi-speed players or the rotationally challenged. Coverstock very "tweakable"

Suggested "complimentary" balls:
Street Rod (solid) Rapid Fire (solid) Pluto (solid) Street Rod Pearl

Bob Holzbauer
Storm/Rotogrip Sr. Staffer
Title: Re: Dimension
Post by: jeffs1 on September 05, 2008, 07:16:15 PM
i drilled my dimension 4x4 layout very strong off the spot with continious motion on the backend with a little polish the ball is very verisital i think everyone needs a dimension in their bag. captain cavey
Title: Re: Dimension
Post by: olererack on September 08, 2008, 12:59:58 AM
Storm - Dimension
Since the Dimension will be the newest ball in the Master Line,
we felt we need to  explain the balls  characteristics
The Dimension produced a much quicker motion off the breakpoint.
Not a  under/over or skid/snap reaction but definitely a bold move as the ball encountered more friction in the mid-lanes.
 This was a big benefit as the conditions broke down when we started moving inside and needed more recovery.
 Even though the breakpoint transition was quicker there was still continuation throughout the entire the hook/roll phase.

The Cover developed by Storm's is a new benchmark of traction performance in oil. The R2X cover stock is a product of continual evolution and refinement which occurs at the highest levels of research and development.

At the heart of the Dimension is the all-new, technologically advanced Continuum core. By inverting and rotating two identical asymmetric halves 90 degrees, and then merging them together, we have created equal mass displacement.

This translates into a tune-able break point found in asymmetry with the continuation and finish of symmetry.
The Dimension  possesses tremendous versatility and performance to fit a variety of styles and conditions.

The Dimension enhanced friction cover stock continues to deliver from the foul line through the pin deck on a variety of medium to heavy oil patterns with the out of the box 2000-grit Abralon finish.
Being User friendly Minor surface adjustments, from polished to dull, will open up endless possibilities for Dimension.
While testing the ball the reaction was positive and assuring
The Hitting Power will impress your rivals
The ball read the front  well gave me a little more length,
Thru Mid lane with continues movement on the backend. recovery wasn’t A Issue that for sure.
Compare to the  Special Agent the Dimension is on steroid

 
Member of Buddies Pro Shop
Member Of Vise Grip
Title: Re: Dimension
Post by: doust on September 09, 2008, 02:41:44 AM
Storm Gravity Shift
The Storm Gravity Shift has the new R2X coverstock combined with the second generation Shape-Lok HD (lower RG) assymetric core. I was expecting it to go quite long and make a big hard move. Instead, I got a pleasant surprise.

My Specs
I’m a RH cranker. 450+ RPM. PAP is 4½ across and 3/4 up. Ball speed is medium high at 18 mph.

LAYOUT
The ball in question had 2.8 oz Top Weight and a 2½" pin. My Gravity Shift is laid out in a medium length, firm arc drilling. Pin was laid out 65° from the PAP with a 60° Pin to PAL Buffer, MB 40° from the PAP.   Remember that layouts are relative to your Positive Axis Point (PAP). PBA fans will see Chris Barnes, Tommy Jones or Wes Mallott throwing similar layouts when seeking control downlane.

Precision layout and drilling were carried out at Bowler’s Edge http://www.bowlersedge.com.au

COVER
The cover stock is factory polished R2X Pearl. R2X is a new coverstock and it reads the midlane in an even more controlled fashion than it's predecessor (R2S). This gets the ball through the heads easily for of energy retention downlane, giving the Gravity Shift ample punch in the backend. The colour is Violet, Cherry and Silver, which matched with the gold glitter engraving, makes for a very attractive ball. The cherry chocolate scent is pretty strong out of the box, but tames down quickly. (I didn't like the smell initially, but it's growing on me, especially after throwing this ball!)

REACTION
I've bowled this piece on Brunswick Anvilane with a 43ft tournament pattern and on the Kegel Middle Road Challenge Series pattern. Here's how it went.

43ft tournament pattern (Crown)
This ball is very clean through the heads, makes a positive midlane read, and then a controlled move left. Not weak at all though as it had a real “churning” roll into the pocket, revving hard while holding a line. I’ve punched it out for tournament conditions with a hook-set layout and it made the 43 ft pattern look pretty easy as long as I moved when the lanes told me
to.

40ft Kegel Middle Road
This pattern played a little tricky early and I could use the Gravity with a straight/soft hand very confidently. When the shot opened up, I moved left with a polished Dimension which looked great. Once the Dimension's carry suffered (i.e. only shot 203), I stood in the same spot with the Gravity Shift and it knocked the lights out for 256!

I have also used it on the house shot with a softer hand. It's a knock out when there's some carry down.

CARRY
Being a low RG ball, I expected that the Gravity Shift would have strong impact. I wasn't disappointed. The Gravity Shift’s pin carry is superb. The ball blew some big racks, sent some impressive messengers and even tripped a couple of 4 pins which is most unusual for me. Even from the soft angles I was playing this ball slaps a lot more 10 pins than I expected. Unless there was grevious pilot error, it got the corners out convincingly at a house notorious for standing them up. I shot a 279 and a 258 with this ball and averaged 235 for a 10 game set using this ball and a Dimension.

SUMMARY
The Gravity Shift surprised me with the level of control it gave me. I was able to make small, simple moves and hold the pocket all day with it. This ball clears the front of the lanes easily with a confident backend move while maintaining excellent pin action. The R2X cover can be readily tweaked with sanding or polish for fine tuning. I would recommend it for use on house shots when you want some extra boards of hook or for medium volume tournament shots.

--------------------
Jason Doust
Storm/Vise Australia Amateur Staff
http://www.bowlersedge.com.au
Title: Re: Dimension
Post by: luckylefty90 on September 09, 2008, 11:27:24 PM
15# 3-4 in pin

right in between stroker and tweener

drilled this one 60 - 4 - 35 dual angle
pin about an inch above my ring finger mass bias would end up in strong position.

so my intentions with this one was for it to recover from the outside on conditions where my other stuff wont. decent lenth, strong backend.

now I've only thrown it for two games, but holy crap.
this is the most hook I have ever gotten. no joke. hits like a truck.
Title: Re: Dimension
Post by: PikevilleBwl on September 18, 2008, 11:33:13 PM
Okay everyone its time for my review only after 3 games tonight. I will go on more detail in about a week or so when i got more games on it. Well I had a 662 tonight with it on my first league night with it. I drilled this ball 5" from PAP and kicked cg about 2" from the center of span. I needed a ball with some length and a little smooth back end well I got it. I tried to go straight up the boards and it wasn't working great for me so I moved left and I was just killing the pocket with every shot. This ball looks like it is very verstial just like the T-Road Solid. I think this ball you could play with the cover a little bit and still kill the pins. It has been awhile since I seen pins fly all over the place and with that ball the pins flew like crazy.
Title: Re: Dimension
Post by: doust on September 29, 2008, 12:09:11 AM
Oh God. I pasted the wrong review in earlier. Sorry folks. (Big red face at this end...)

Storm Dimension
The Storm Dimension has the new R2X coverstock combined with the new, medium RG symmetrical Continuum core. I was expecting it to go long and jump hard. What I got is much better than that.

My Specs
I’m a RH cranker. 450+ RPM. PAP is 4½ across and 3/4 up. Ball speed is medium high at 18 mph.

LAYOUT
The ball in question had 2.8 oz Top Weight and a 4½" pin. My Dimension is laid out in a medium length, strong arc drilling. Pin was laid out 65° from the PAP with a 45° Pin to PAL Buffer, MB 60° from the PAP. Pin ended up over the bridge, with CG kicked an inch right.

Precision layout and drilling were carried out at Bowler’s Edge www.bowlersedge.com.au

COVER
The cover stock is factory finished 2000 grit R2X Solid Reactive. R2X is a new Storm coverstock and it reads the midlane in an even more controlled fashion than it's predecessor (R2S). I polished the ball out of the box with Reacta-Shine to get it through the heads easily. After the first night out, I took a tiny bit of the gloss off with a 4000 grit abralon pad to make it roll a pinch earlier and it did the trick. (It's very adaptable.) The colour is Red, Magenta, and Black, with fluorescent Yellow markings, making it very easy to read the ball's motion downlane. The “fruit punch” scent is quite mild. Like the judicious use of perfume, it's only really noticable up close. An added bonus is that Storm testing staff report exceptional durability with this coverstock.

REACTION
I've bowled this piece on Brunswick Anvilane with a 43ft tournament pattern and on the 37ft house shot. Here's how it went.

Tournament Pattern
This ball is clean through the heads, makes a smooth midlane read, and then a strong rolling, controlled move left. With a bit more flip from the release change, the ball read very strong and smooth off the spot and rolled 10 back easily. It made the 43 ft pattern look pretty easy as long as I moved when the lanes and pins told me to.

House Shot
As is often the case, I was in trouble on the very bouncy house shot with this ball until I laid off the revs. Once I started to throw it like a tweener, the reaction on the higher friction pattern was amazing. I could get this ball downlane where it would recover from just about anywhere in a big, continuous arc. While still being “rolly”, this ball turns the corner with authority thanks to the medium Diff RG core. I can see how Pete Weber shot back to back 300's with a Dimension in Europe recently.

CARRY
The Dimension’s pin carry is very impressive. The ball blows a light hit with punishing power and sends messengers aplenty. I left some 10 pins and took some shine off (as mentioned earlier) which seems to have fixed the problem. It also seems to break up splits from nose hits, leaving you with more makeable spares and therefore closed frames.

SUMMARY
The Dimension provides lots of roll with the ability to control the shape and amount of hook with hand and speed. It is not a skid/flip ball that throws strikes or tennis scores (like 6-3, 6-1, 6-0). I was able to make small, simple moves and hold the pocket all day with it. This ball clears the front of the lanes easily with a strong midlane move while maintaining excellent pin action. The R2X cover can be readily tweaked with sanding or polish for fine tuning. I would recommend it for use on house shots when you want extra boards of hook or for medium volume tournament shots. A sanded surface would readily cope with high volumes of oil.

I think this ball is even better than the Special Agent. (That's high praise from me.) I like it. A lot.

Jason Doust
Storm/Vise Amateur Staff
www.bowlersedge.com.au
--------------------
Jason Doust
Storm/Vise Australia Amateur Staff
http://www.bowlersedge.com.au
Title: Re: Dimension
Post by: JZook on October 01, 2008, 11:47:29 PM
Storm Dimension

I have this ball laid out with the pin above the middle finger and cg straight under that.  My pap is 5 over and 3/8 up.  This ball for me is very strong.  As typical with Storm equipment it is easy to get through the heads.  The ball is very even rolling but still strong in the backend.  It has a very good continuous action through the pins.  I used in on a house shot and intentionally threw the ball wider to see how it would react off the dry.  The ball still did not roll out.  When i would miss in it still had plenty of hitting power.  No weak corners with this ball.  For everyone that liked The Cell you will like this ball just as much.  Compared to the Cell I think this one is easier to get through the midlane and is a couple boards stronger.  Once again a very nice piece from Storm.  Cannot wait to throw what they follow up this ball with.




Jason Zook
PBA Member
South Region
Title: Re: Dimension
Post by: Mr Straight Ball on October 06, 2008, 02:34:51 PM
16# * 4" pin * 2oz top * 2" pin to PAP

For those that aren't familiar with the pin to PAP distance, this dictates that the ball rolls and arcs as it goes down the lane. The most important factor for me is that it does not jerk at the end of the pattern. I tried this layout after Doene Moos (then the area rep, now the Brand Mgr.) and I rapped about how I desired to throw a big piece when I should have a small piece in my hand.

I have thrown this ball dull, polished and in between. My favorite cover is the 1K abby pad I ran on it with a little polish and water until it was shiny. The Dimension has been pure butter when I the "bump" is strong. The ball bleeds off some of it's energy early but it does not lose the hitting power. Great layout for the high RPM players.

Thanks for your help Doene, you nailed the reaction to a T!

I have also mapped one out for my friend with a 4" pin to PAP, his is a MONSTER on tight lanes. It's the first time I have ever heard him say he had to put a ball down because it was hooking to much.
--------------------
Baker...Why doesn''t my ball hk?
40 Boards & A Ball Tournament Director
www.40boards.com
The left sucks & the right is wide open! R.I.P. Brizmo 6/15/08

Title: Re: Dimension
Post by: StormN3rik on October 07, 2008, 12:51:31 PM
My Dimension has a 4 1/2 by 3 1/2 layout with a hole an inch from my axis.  I left the surface at 1000 abralon.  I found this surface to be the best fitting for my game.  This ball works really well on heavier volume in the middle of the lane.  The pba patterns I find most success on with this bal are Shark and Scorpion.  The Dimension gives me an earlir roll but doesnt burn up, and a continuous motion through the pins.  I Love this Ball

Erik Ramos
PBA Storm Regional Staff
Title: Re: Dimension
Post by: TheDude on October 07, 2008, 04:31:45 PM
I don't write reviews often, but this ball after drilling a dozen of them, I am throughly impressed.

This ball compared to the cell is a different shape. It truly is. The cell's early revving core is alot of midlane but this ball is more continuation in the backend. Lacking no midlane in its own respect, it doesn't miss the breakpoint. The cell will sometimes roll too soon on dry backends and hook set too soon. this ball saves energy better through the heads and makes a smoother transition off the dry.

Layouts for bowlers with high rev rates to non existant rev rates have been easy to dial in. Using pins sometimes as far as 5 3/4 inches it still produces a minimum of 3 inches of flare and on low rev players with a 4 x4 layout it was producing over 5 inches of flare.

Polishing this ball makes it smooth and work on a wider range of conditions. Nothing higher than reacta shine would be recommended. Using Xtra shine for one customer made the ball very irratic.

tastey little nugget that pleases more ppl than any other previous storm ball.

--------------------
Timothy @Juniors Pro-Shops
LaSalle, Quebec
Located inside Pont Mercier Lanes.
Edmonton, Alberta.
Located inside Ed''s Rec Room.(WEST ED MALL)
King Of Roto-Grip In Canada.
Keep them honest!


www.juniorsproshop.com(coming soon)
Title: Re: Dimension
Post by: Bigmike on October 09, 2008, 12:07:45 PM
See stats for profile. Drilled one to try out.

Lay Out: 5" from PAP over my ring finger at a 65* angle. This would be a 65/5/35 dual-angle drilling. I have not touched it with a weight hole.

Surface: I have been leaving this at 2000 abr and touch the surface up with a 2000 pad when the cover starts to slick up from lane oil.

Purpose: To give myself a ball that could be used on longer patterns and ones with higher volumes.

Initial Observations: I have tried this out on some house conditions, our PBAX and Sport league patterns, and PBA Central Region patterns. This ball is the real deal and performs as advertised. I pulled this out on Shark in league and had no problem getting it to read the lane early enough to carry on Shark on Pro Anvilane. I also used this on a medium/lower volume-44 foot long pattern later in the summer playing more up the lane and this ball stood out again. I can find use for this when I need to start a little more in the puddle on THS and can keep moving left into fresher oil and get this ball to finish with no problem.

Final thoughts: This ball is everything Storm advertises and then some. I have word-of-mouthed it to several players who frequent our shop and several league bowlers and these have shown up on racks all over central Ohio. I am tempted to get another one and drill it more of a angular layout and give it a smoother surface to try to fill a gap in my bag that is badly in need of filling. Try one of these out and I think you will be plesantly surprised.


--------------------
"Why don''t you call me sometime.....when you have no class" ~~Rodney Dangerfield to his college professor in Back to School ~~1986

Mike Craig-Columbus, OH
Title: Re: Dimension
Post by: solid9pro on October 10, 2008, 07:15:44 PM
The lay out on this ball is 6.5 x 4 and for the coverstock and core in this ball it goes for a long time then it will make a hard move left i have yet to get this ball to roll out and believe me ive tried i left it as box finish i use it everywhere i go    this ball has any of the nv line or cell line beat   the only thing is the ball is a mop and picks oil up fast you really have to keep it clean or it will fall off a couple boards   my thought of another ball would be the dimension core with the tropical coverstock
Title: Re: Dimension
Post by: Higgy on October 16, 2008, 03:30:35 PM
DIMENSION -pin above ring finger- 4 1/4 pin to PAP,  Cg  kicked at 70 degrees
DIMESINON is overall more hook then the SPECAIL AGENT. I have two SPECIAL¡¦s  with pin below the fingers and decided to drill the DEMINSION more stable since the cover looked to be stronger. Its great to use on the longer patterns or when there is carry down and if the front part of lane allows you ļ.
The ball is continuous and stores the energy better than the SPECIAL which is remarkable because the SPECIAL stored it pretty well. For me the ball is too strong for league shots and I have mainly used in long pattern tourney¡¦s or medium patterns when the backs carry down.
Title: Re: Dimension
Post by: old roller on October 17, 2008, 12:30:01 AM
I drilled  my first Dimension and used it to win $20,000 in a tournament in New Mexico. After using
a Passion during qualifying, the tournament director reoiled the lanes but did not strip the back ends.
Then Dimension gave me a fantastic mid-lane reaction allowing me to open up the lanes with a strong mid lane read and a nice turn on the back end with heavy carry down. I put the pin above the ring and
and to the right. Hardest hitting ball I have ever thrown..Averaged 255 for 15 games....it was the ball
that gave me a reaction that no one had.
Title: Re: Dimension
Post by: OnTheFly on October 20, 2008, 03:51:50 PM
Drilled two Dimensions.  Number one Dimension is drilled with a 5 inch pin to PAP below Bridge, CG Stacked, no hole.  Number two Dimension is drilled with a 5 inch Pin to PAP pin above fingers, cg 3 inches from PAP, extra hole on PAP.  First off let me say that this is and has become my benchmark ball of the Storm line.  Number one Dimension was drilled with the intention to give me a strong midlane read and respond smooth to friction down lane.  With this drill and leaving it with an out of box finish this is exactly what it gives me.  Number two Dimension was drilled with the intention to use when I need a strong mid lane read, and a stronger response to friction down lane.  With it's out of box finish, this is the exact reaction I was looking for out of this drill.
 After testing this ball with different surfaces, I can use this ball on just about any volume of oil except the most dry conditions.  The ball reads the mid part of lane so well and doesn't burn up like other balls I have seen that dig into oil.  The continuation through the pins is what separates this ball from the competition.  With that being said if you are looking for a piece of equipment that you feel confident you can use 85 to 90% of the time, whether it be on a house pattern, sport pattern, or tournament pattern, this is the ball for you.  If you liked the Special Agent, you will love this ball. It gives you that look you wish the Special Agent gave you at times. Can't wait for other releases in this line!
--------------------
Nathan Michalowski
Storm PBA Regional Staff
Etonic-Worldwide
Title: Re: Dimension
Post by: jeffs1 on October 21, 2008, 05:24:56 PM
just drilled my second dimension i layed this one out
with a pin below the fingers no extra hole did not change
the surface it was awesome on the shark pattern it was alot at
the front and midlane then my special with a similar layout
 the dimension is unbelievable.      
captain cavey.
Title: Re: Dimension
Post by: GJACKSON on October 22, 2008, 10:20:36 AM
Finally after having this ball for a while I am please to post a review. Storm did an amazing job designing the new Storm Dimension.

 I drill this ball using MoPinel dual angle layout.  It has a 45 degree drill angle and a 30 degree VAL angle with a low weight hole.  This layout produces length though the heads and a really strong continuous arc through the pins.  The surface is still in box condition.

 I have been able to use this ball on all PBA patters except the Cheetah which is the shortest of them all.  The best pattern that the ball performed on was the Shark and the Scorpion.  I have tried to use the ball on the THS in the center where I work but the ball over hook or either was DOA (dead on arrival)…this was due to wood lanes and the minimum volume of oil.  In another center that has synthetic lanes the ball was able to get down lane and transition a little hard than on the PBA patterns.  (My first game in this house was 279).

Overall my take on the Dimension is that it needs oil to perform to its maximum potential.  And when you have enough oil you will destroy the competition!

Great job once again from Storm!

Giovanna Jackson
Storm Staff Member

--------------------
...you can only bowl one frame at a time...relax and concentrate on KICKING BUTT!
STORM AND VISE STAFF MEMBER
GIOVANNA JACKSON
Title: Re: Dimension
Post by: Storm Nation on October 22, 2008, 06:54:22 PM
I have thrown this ball for awhile now and continue to be amazed at the versatility of this ball.  I had to drill up a 2nd one I liked it so much.  We don't see alot of heavy oil in our area so I applied a little moonshine to both balls.  I drilled the pin out with the ring finger with cg kicked a little right.  Very smooth through the front with a strong continuous arch through the midlane.  I had alot of success with this layout playing the lanes a little straighter.  

  I wanted to cover a little more on the back with the 2nd one, drilled with pin up over the ring finger and cg in midgrip.  Same easy motion through the front, but can open up the breakpoint with this one.

  This ball is all it says and more!!!!!!!!  I haven't met anybody that didn't love theirs.  What a ball!!!

   Storm On!!!!!!!!!!!!!
Title: Re: Dimension
Post by: waltroy on October 23, 2008, 01:38:34 PM
I HAVE BEEN Using THIS BALL AS MY A BALL Since STORM FIRST ROLLED THIS BALL OUT.
THE CENTER I BOWL IN HA LOTS OF OIL AND I FIND THIS BALL WORKS WELL ON OIL. I CAN STAY WITH THIS BALL MOST OF THE NIGHT, WE BOWL 4 GAMES IN LEAGUE .I DRILLED THE BALL WITH THE PIN ABOVE THE FINGERS 31/2 FROM PAP. MY BALL SPEED IS 13.5 AT THE BREAK POINT. I'm 65 YEARS OLD AND BOWL FROM A WHEELCHAIR AND CARRY A 195 AVERAGE. HOPE THIS GIVES YOU SOME INFORMATION AND TRY THIS BALL YOU WILL LIKE THE ROLL AND CARRY. WALT ROY REDDING,CA
Title: Re: Dimension
Post by: arturocafe on October 23, 2008, 06:25:14 PM
I drilled my Dimension with a 65° front angle, 5” pin to PAP, 50° back angle and a medium sized weight hole near my PAP.  Out of the box, it quickly became apparent to me that this is one of the strongest balls Storm has ever made.  The Dimension is a far cry from the usual skid-flip reaction you normally expect from Storm.  This ball reads the midlane very well, but unlike a lot of balls at 2,000 Abralon, it still has enough in the tank to make a solid move on the backend.

I kept my Dimension at the box surface for a while, but was unable to use it very often.  Even with the 5” pin, it was just too strong for a lot of the conditions I encounter on a regular basis.  In hopes of getting a little more mileage out of it, I brought the surface up to 4,000 Abralon.  This gave me that little bit of extra length I was looking for and the continuation through the pins to get the corners out.

My experience with this ball so far has shown me that out of the box, it is great on heavy oil patterns.  Even with my firm ball speed, this ball reads the midlane strong and rarely blows through the breakpoint.  And if it is a little too early for your liking out of the box, the surface is also very tunable for medium length/volume patterns.


--------------------

--------------------
Art Brown
Storm Amateur Staff
Title: Re: Dimension
Post by: iwonn92 on October 24, 2008, 08:46:43 PM
I drilled the Dimension with my favorite layout 4x4 no hole with the out of the box finish {2000}. The ball hooked to soon so I had to take  the ball down to 4000 which keep the energy much better to the break point. I was able to then use the ball on many different condition's all with good result's, the ball seams to have a  great hitting power even if I come in half pocket it blow's the pin's right off the deck. AMAZING! I used a 5 inch pin above the finger's on the next ball and was really amazed how well it worked. I took the cover to 600 grit then used Storm's #2 polish over the top and that really allowed the ball to store the energy on the backend and the hit was great! So between the two ball's how can you go wrong? Keep in mind all of these ball's can be adjusted to the ball reaction you are looking for with minor surface work.
 
 Thank's Storm Product's for continuing to raise the bar in bowling ball technology. I am looking forward to the Virtual Gravity and Hy Road along with Roto Grips new Pearl Cell. It just keeps getting better and better!

 All the Best
 Eric Forkel
 Storm Product's

 
Title: Re: Dimension
Post by: ChrispyBrownies on October 28, 2008, 02:47:36 PM
Storm Dimension
Drilled Pin over ring, cg in center of palm, OOB durface, 3" pin.

There is no doubt in my mind that having the Dimension as my first Storm ball was a great to start out throwing Storm's products. Not only is the Dimension one of the most smoothest balls I have ever thrown, but its versatility is almost unmatched. Playing multiple areas/angles on the lane are no longer a problem.
When I say smooth, I mean smooth aggressive. Having the aggressive arc off the backend, makes this ball unbelievably predictable. My style of play consists of a ball speed of 13-15 mph, and a lot of side roll on the ball. What makes teh Dimension so amazing is that I can still hit the ball in my release and it will still hold its breakpoint downlane without overreacting. On the other hand, I can take some revolutions off the ball, and it still reads the lane in time to get back to the pocket. All of this done without losing what most balls lose-carry. The Dimension seems to carry a lot better than most dull balls I have ever thrown. I have no problem trusting this ball on the College Sport Shots I bowl on. The only thing that I could find anybody would consider a downside to the Dimension is the fact that this ball needs oil. I would not recommend it on drier conditions.
Overall, I would give the Dimension a very solid 9.5/10. I am thoroughly impressed with the Dimension and I would suggest it any competitive/serious bowler.

Thanks,
Chrispy
--------------------
Trinity High School "A" Bowling Team
Louisville, KY
State champs- 2002, 2003, and 2008


Morehead State University Bowling
Proudly Sponsored by Storm Bowling Products

www.StormBowling.com
Title: Re: Dimension
Post by: STORM CHASER on October 28, 2008, 06:01:37 PM
If you the ball that reads the midlane so strong ans still has the power to crush the pocket this is the ball. I have two of them. THe first I drilled prior to bowling several regionals and pba exp leagues.
Thr first I used a 5 x 4 drilling with a one inch pin buffer and a small hole on the pap. Then to give it a little length for the shorter patterns, hit it lightly with Storm Reacta shine. This ball was so smooth and it did over react when it hit the dry.
The second drilling used was a 4 x3 with pin under the fingers, box finish. It starts a little sooner in the heavy oil, but reads the midlane so strong on its way to the pocket. The Dimension is a go to ball.
Patterns used on have been all the PBA patterns and guardian wood lane surface with a 44 foot  blended pattern and a 40 foot House pattern on HPL.
Storm continues to lead the way.
Get one today and join the Storm Nation.
Mark Weiss
Storm Staffer
Title: Re: Dimension
Post by: Fritz on October 28, 2008, 09:41:42 PM
The Storm Dimension has definitely been my "go to" ball.  This past Saturday night in league I shot the following with the Dimension, 300, 279, 231 for an 810 set.  The ball is drilled 3/8 - 3/8 stacked, with low top weight and a 1/2 oz. side.  Absolutely love the ball, it goes through the mid lane and has an extremely strong back end.  Congratulations Norm Duke and the rest of the Storm staff.  Let's have another exciting year!

Fritz Hoppert
Storm Staff Member
Title: Re: Dimension
Post by: soccerkid_6 on October 29, 2008, 02:29:59 PM
Pin 3 1/2"
Pin 1 inch above bridge
CG 2 inch below ring finger kicked about 30 degrees
Surface- Factory finish- 2000 Wet Sand

The Dimension is a really good ball for a variety of conditions. If I put all my hand in it, this ball moves like no other ball I have ever thrown. This ball gets through the front, then hooks hard off the backends. You can also play on different parts of the lane. If you want to play gutter to gutter, you can. If you want to take some hand out and play up the gutter, you can. The only problems I have with this ball is it's bad getting through the heads if they are burnt. I also sometimes don't like how much of an angle it is of the spot. I'm not leaving as many 10-pins with it, but I have left many 9-pins. Overall, I really like this ball. It would be a good ball for any bowler.
Title: Re: Dimension
Post by: masonize12 on October 30, 2008, 04:34:56 PM
Storm Dimension

Tweener/Cranker
Pin above ring finger 4" from PAP
CG stacked
OOB Surface

This is the first high end Storm ball I've thrown and I can't say enough about it.  I already had some expectations as I had previously had a Roto Grip Cell and had heard many comparisons between the two, and needless to say my expectations were met and exceeded.  Easy length through the front with a hard, controllable break.  This ball makes a very hard arc through the break and carries the corners extremely well.  It has great continuation and on light hits, throws pins around the deck.  On sport patters, it gives a little more room for error outside as it is able to create enough friction to get back to the pocket.

Overall a terrific ball from Storm and a great introduction for me to their high end line.
--------------------
George Mason Bowling

2008-2009 Storm Sponsorship Program
Title: Re: Dimension
Post by: msuhoss231 on November 01, 2008, 07:59:33 PM
Likes:
I am a high revolution player and i bowl in college on some of the toughest conditions out there and this ball has matched up great with all of them so far.  I feel like I am in total control of this ball whatever I want this ball to do it does.  The general shape of this ball is clean through the heads with a smooth continuous pop off of the spot.  I drilled my dimension 5 inchs from the pap with the cg about 4 inches from the pap.  I will definitely drill another one of these before the year is over.  

Dislikes:
out of the box the cover was a little too aggresive for me and I took it to 4000 abralon so that it would get a little further down the lane.
Title: Re: Dimension
Post by: tsac84 on November 02, 2008, 09:29:29 PM
layout: 2"pin- pin above bridge, CG kicked 45 degrees from the midline
Surface: box (2,000 grit abalone)
 The dimension is one the most versatile balls I have ever thrown. It reads the midlane really well with a strong, continuous backend, but not jerky. Very strong but controllable shape with this layout.  This ball is very predictable and forgivable because it reads the spot so well.

Dislike: only thing I found was that with surface change the ball doesn't read the spot as well.
Title: Re: Dimension
Post by: RH1818 on November 03, 2008, 01:42:14 PM
Layout: 4 1/2 " pin above the ring finger x 2" cg with weight hole 6" from the center of the grip. 1000 Abralon



I have been able to use this ball any where from Sport Patterns to House Shots and have had a lot of success. I am able to use this from  a variety of angles.
Pin carry is amazing. I tried to compare this to my Special Agent drilled similar and it hooks about 5 more boards on the back.
Title: Re: Dimension
Post by: BigtymerB on November 05, 2008, 06:38:20 PM
The Storm Dimension is a great all around ball.  I am considered a "tweener" I fall some where in between a stroker and a cranker.  So far I have only used this ball on college sport patterns including one NCAA tournament.  The Dimension is very smooth through the fronts and hits very strong when it gets to the pocket.  I have played up 10 with the Dimension as well as around 18 to 10 and it performed well on both lines.  I will say that on dry or short patterns unless you have the ability to loft the ball it will be hard to find a line.  I do not have the ability to loft the ball so I ended up balling down towards the end of our last tournament.  The Dimension is a great addition to anyones bag who is looking for some hook.
Title: Re: Dimension
Post by: biglefty111 on November 11, 2008, 06:48:13 PM
my dimension is 15lbs its drilled pin down with the cg kicked at a 45 degree angle i bowl on college patterns and the dimension has held up great it is a very versatile ball i can play up the gutter or swing it out  the ball feels great of the hand and it rolls very smooth.  i feel like i have complete control of the ball and it is very predictable making it much easier to use.  the storm dimension is an all around great ball
Title: Re: Dimension
Post by: batbowler on November 12, 2008, 11:00:05 AM
First I want to thank Steve Todd for this great rolling gem! My pap is in my profile and please note that although I track very low, I'm not a spinner release. I laid this ball out with the pin down and 4" from my pap, which placed the pin below my middle finger and I placed the cg right and below the midline this equated to a 50deg layout. I placed a weight hole measured from my grip center through the cg and is placed just below midline 1" past my val. This ball is beyond smooth with a strong move at my breakpoint with amazing continuation. I rolled it with my Special Agent that is drilled with the same 50 deg layout, but with the pin above my ring finger and pin 31/2" from my pap. When I got lined up I could play a similar line with both, but the Special I was maybe a 1 to 2 boards further left, but it didn't have the continuation through the pins like the Dimension. I felt I had more room and forgiveness with the Dimension and will select to use it more because of the extra room I have, because of the smoothness and forgiveness! The carry and hit of my Dimension is better and I like the fact that I can stay lined up longer with the Dimension. I rolled several games using both and when I had to move left with the Special Agent, I was able to stay in the same place with the Dimension, because of the strong arc at the breakpoint. The Special Agent had more deflection at the pocket than the Dimension, even with the stronger move at the break point. Thanks Steve, Hank and Storm for making a very usable piece of equipment, now for a pearl version! Just my $.02, Bruce
--------------------
"Train a child up in the way he should go and when he is old he will "BOWL UP A STORM AND BE KING OF THEM ALL" and not turn from it."
Title: Re: Dimension
Post by: John Kolessides on November 13, 2008, 04:41:36 PM
The storm dimension is an extremely aggressive and versatile piece of equipment. It clears the fronts well and has the potential to break late oe early depending on the conditions. Although the dimension would be a powerful tool for any house shot, this review is written from a collegiate bowling perspective. Bowling collegiately poses some of the most difficult oil patterns and overall conditions. The dimension has destroyed medium length oil patterns consisting of 41 foot flat and a modified scorpion shot, due to a smooth controlled roll and a consistent break point. However good the dimension may be on medium and longer patterns it is a diffult task to continue to use the dimension on shorter oil patterns, where I usually switch to the t-road pearl, which goes farther down the lane and flips hard on the back end. If you want to get ahead with your game throw storm. It's that simple.

George Mason Bowling

John Kolessides- GMU Club Bowling Anchor
Title: Re: Dimension
Post by: slogan8r on November 19, 2008, 09:45:36 AM
I have my Dimension drilled with the pin half an inch above the right finger and cg stacked.  Overall this is one of the greatest balls I have ever thrown on sport conditions and a very aggressive ball on house shots.  The Dimension has a very controllable reaction, one of the smoothest rolls ive seen, its clean through the fronts and still has the energy to destroy the pins.  I bowl on sport shots all the time (including PBA patterns) and this is my first ball of choice on any pattern 39ft and greater.  I would recommend this ball to anyone who wants to take their game up a notch or fill a void for a high end ball.

Please read my reviews on the gravity shift and rapid fire pearl and how they compliment the dimension for a complete ball arsenal.

Shawn Logan
GMU
Title: Re: Dimension
Post by: k9officer on November 22, 2008, 12:50:22 AM
When I got my dimension drilled I was planning on using it on the different sports shot conditions I would encounter bowling in college bowling tournaments.  This ball is very versatile allowing me to play up the boards on the left side or move deep inside when the lanes start to break down.  Over all this ball has preformed beyond my expectations on these types of shots.  For me in my typical house shot it is very agressive and can really only be used for about a game.  I shot 780 right out of the box my first set in league competition.  I very highly recommend this ball.

Adam Corder-GMU Club Bowler
Title: Re: Dimension
Post by: jpcote300 on November 23, 2008, 02:31:53 PM
This ball was amazing on heavier pattern like the storng motion this have and also retain energie . Hit very hard into the pins . Very similar to the cell now since roto-grip introduce the Cell pearl it's time to storm to introduice the Dimension pearl !!!
Title: Re: Dimension
Post by: Your_Nemesis on December 06, 2008, 12:17:18 AM
This is an extremely versatile ball. However my first advice to you would be, unless you have no hand or bowl on a puddle of oil, polish this ball immediately. The only reason to ever use this ball sanded would be for a PBA shot, double oiled lanes, and mounds of carry down from little kids and seniors with plastic equipment. This ball is not made to make the big turn, but what it does do better than any ball on the market is roll in oil. If polished, the move will be more defined and slightly bigger than sanded on medium to light oil patterns (but if you're on light oil, put this ball away now!) Holds energy well and carries better than expected. If you fail to heed my advice and decide to use this ball on light oil, you will find it as useless as the Detroit Lions' 08 season. Once understood, this is an amazing ball which continues to put Storm at the head of the bowling world.
--------------------
Arsenal:
Storm Dimension
Storm Street Rod Pearl
Dyno-Thane Element Zr40
Track Xception
Brunswick Fury Pearl Tour Edition  
Ebonite Maxim (spare)

My specs:
Stroker
Tons of end over end roll (minimal side roll)
17-18 mph avg.
High track
Mid-high revs
Title: Re: Dimension
Post by: ebmj300 on December 10, 2008, 05:13:52 PM
It is an incredibly strong ball.  Before throwing it I refinished it with a 4000-grit abralon pad.  The read thru the heads was great with a continuous motion in the back part of the lane.  I started a little outside and finished in with a much deeper shot (swinging it out).  Another great ball from Storm!
Title: Re: Dimension
Post by: jimmyt on December 17, 2008, 10:37:34 PM
After listening to Riggs talk about how he needed to use abralon on his Dimension almost every set to keep a good look, I got to league last night and there was more oil than normal. Usually I have been able to start with my Virtual Gravity, but that was to long for the look that I was trying to get. So I got out my 500 grit and took my Dimension from 2000 polished to 500 and had a very good look. Started with the first 21 strikes, left a solid 9, and a strike, for 300, 279 start. Last game pulled the first three shots, split, strike, split. Decided to change to the Virtual after that since the shot had opened up a little, finished with the last 8, 245-824. These storm balls are second to none,awesome!!!!! The last 6 weeks I have had 4 800's, 1 299, and 2 300's!!!!!!Storm On!!!!
Title: Re: Dimension
Post by: doust on December 21, 2008, 07:27:07 PM
Well, I drilled another one! I like this ball that much. I still have and use the first Dimension, so I shall refer to them as Dimension A & B respectively. I expected this ball to go quite a bit straighter than it does, but then again, I haven't seen serious oil with it yet.

LAYOUT
Dimension B has a longer pin to PAP (5¡±) than Dimension A (4¨ö¡±), in a rollier layout under the middle finger. (Dimension A was pin above bridge.) MB is at 4¨ö¡± to PAP, with the CG ending up near the thumb hole (4¨ö¡± pin).

Starting with a low TW (2.3 oz.), this ball did not require an extra hole, coming in at >¨þ oz. side weight and >¨ù oz. thumb weight. (The absence of finger grips means that very little weight is removed compared to the 1¨ù¡± thumb slug.)

REACTION
So far I have played with this ball on the Tuggeranong house shot and the Brunswick Australia Cup pattern. I smoothed the R2X surface up to 2000 grit on the Haus Resurfacer, but the ball still read too early. A light buff with Storm Xtra Shine now gets the ball downlane easier.

Getting this ball to store it's rotational energy longer through the longer pin to PAP layout causes it to unwind with a vengeance off the back of the pattern. When there is sufficient oil outside 10 board to sustain life, this ball is a masterpiece, picking up the friction firmly and making an early then continuous motion in the backend. For my rev rate, it needs to break from an outside angle. On the house shot, my high rev rate made the ball pick up too soon and nose dive as the THS break point requires a soft backend reaction to hold the pocket. For players who throw straighter, this would be a very good layout to use.

Providing I keep my hand quiet/soft at the release, I can use this ball on a variety of angles. It's scary how far it will recover with less revs. I'm usually aiming at the gutter at 40 feet with this thing.

CARRY
This ball like Dimension A has outstanding carry which defies it's hook shape. The ball will look like it's going to leave a flat 10, then doesn't. It throws messengers with great aplomb and even trips the odd 4-pin. Soild hits provide very satisfying results. Like any high performance ball, too much friction will cause it to leave corners, so keep your eyes on that midlane reaction and don't be afraid to move in to more oil to get the corners out.

SUMMARY
Dimension B is every bit as good as Dimension A, only different. The layout gives me a new look in parts of the lane where the Dimension A did not have enough backend ¡°pop¡±. It gives me a ball that slots in nicely between Dimension A and the Virtual Gravity.

--------------------
Jason Doust
Storm/Vise Australia Amateur Staff
http://www.bowlersedge.com.au
Title: Re: Dimension
Post by: Miguel C on December 25, 2008, 12:57:28 PM
I bowl for UC Santa Barbara and I have been using this ball for the past 4 months or so and couldn't be happier.

I have it as a 5x5 layout so it has a flippy back end, but it is controllable. This ball works well on the heavier oil patterns as it is meant to do. If you are looking for a ball to use on shorter, yet heavy, oil patterns this ball with this layout will allow you to get the ball to come back from the outside of the lane. Do not expect to use this ball on anything but heavy medium to heavy oil, otherwise you will be sorely disappointed. This ball has to much back end for dry lanes. All in all great ball for those houses that do not hook much.
Title: Re: Dimension
Post by: bullsbowler2990 on January 11, 2009, 04:15:06 PM
I bowl for the university of south florida and i have been bowling with this ball for about 2 months now.

I got this ball with a 3 inch pin and drilled it stacked. I love it drilled this way. its great for a heavy oiled lane. it hooks a lot, and is great for a heave medium length lane. I recommend this ball for anyone who needs a good ball for heavy oiled lanes.
Title: Re: Dimension
Post by: USFLefty on January 13, 2009, 01:10:23 AM
Lane Conditions: Medium-Heavy Oil
Typical Conditions: Good ball for both THS and sport conditions
Type of Lane: Combination Synthetics
What part of the lane did you play? Standing 5th arrow from left, playing out to 10 board on THS
Did the ball track out? Makes a strong motion to the pocket, does not roll out.
Weight of bowling ball: 16
Lefty/Righty: Lefty
Surface of bowling ball: Sanded to 4000 and polished with ebonite factory finish
Likes:  Not your typical length and snap motion, but length and continuous motion to the pocket.
Dislikes: None

This ball is drilled with the pin above my ring finger with the CG kicked out. This ball makes it further down the lane then my OOB 2000 finish, but does not loose any of the continuous motion to the pocket that the Dimension promises. This ball is a great go to ball after my OOB finish Dimension starts to hook too much. This ball is great on both house shots, and collegiate sport patterns. I have used at many collegiate tournaments with great success. I am averaging 224 in my Thursday night league, so I guess its not a bad ball. Storm has come out with another great ball, and I can't wait for the Dimension Pearl to hit the shelves.
Title: Re: Dimension
Post by: JohnM on January 13, 2009, 11:32:35 PM
I have been using my dimension for about 2 months now, and it is great.  Not only is it great for house conditions, but its served me well in collegiate sport conditions.  I would recommend this for any bowler who needs a heavy oil ball.
Title: Re: Dimension
Post by: PremierBowlersProShop on January 14, 2009, 06:56:16 PM
Lane Conditions: Medium-Heavy Oil
Typical Conditions: House Shot
Type of Lane: Combination
What part of the lane did you play? Third Arrow
Did the ball track out? Normal
Weight of bowling ball: 15
Surface of bowling ball: Sanded
What grit was the surface of the ball? 1000
Likes: Creates a good amount of friction in the front part of the lane that helps in oil. Also has a angular break point increasing my pin carry.
Dislikes: Does loose to much energy in drier lanes, but I wanted it only for Oil.

The Dimension is a good oil ball, I have mine laid out 3 3/8 x 3 3/8 and it creates a good amount of friction in the front part of the lane. I did sand my down a little more than box just to help with the extra amount of oil that we tend to get in the travel league. Any speed dominate player who needs some help getting the ball into a roll the Dimension is a good choice. Softer ball speed players won’t like it quite as much just because of the amount of friction is too great, and will burn up or loose energy they might have to polish it up well. High rev players have had mixed emotions, some think it’s to angular and other love that it wants to scream off the dry. Overall it’s a very versatile ball so don’t be afraid to polish or take a scotch bright pad to it.

Compared to what’s in my bag:

Virtual Gravity Drilled pin under both MB 3” right no hole:
My Virtual Gravity gets down the lane a lot better and is much smoother or arching to the pocket. Virtual is a good piece to go to once my Dimension starts hooking to early or dying out on the end.

Angular One drilled 4 x 3 3/8:
My Angular One gets down the lane a lot better and is a little sharper at the break point. Doesn’t hook near the same amount overall as the Dimension.

Pin Slasher 4 X 3 3/8
My Pin Slasher at 2000 grit and is way smoother and rolls a lot sooner on the lane but overall doesn’t cover as many boards as the Dimension. The Dimension hooks about 8 to 10 boards more than my Pin Slasher.

--------------------
"Practice doesn''t make perfect, perfect practice makes better."
Title: Re: Dimension
Post by: MichStBwlr2009 on January 19, 2009, 05:03:57 AM
Drill Pattern: 5.5X4 (pin under middle finger) with flare increasing hole
Surface: 1000 abralon

Strengths:  The Dimension is one of the best heavy oil balls I have had to date.  It gets into a roll early, but unlike other "oilers", this ball has great continuation through the pin deck.  The carry with this ball is fairly good for an earlier rolling piece, and is still able to kick out corners from inside angles.  The Dimension is best suited for medium to longer house/sport/pba patterns, as if used on anything shorter, the surface should be adjusted accordingly.  The advantage the Dimension gives you over other "oilers" is that it gets into a roll early, but still has some "pop" at the break point, letting you move further inside without sacrificing carry.

Weaknesses:  Be careful not to take the surface down too low, cause the Dimension began to react very erratic with a Burgundy pad surface (about 320 grit).  I was led to believe the ball was actually burning too much of its energy in the front of the lane, leading to erratic results down the lane.  In addition, when this ball begins to leave flat 10s, you know its time to put it away and go to a cleaner cover.

Comparisons:  Like many others before me have said, the Dimension reminds me of my Special Agent, just with that extra kick at the break point.  For me, the Dimension is a couple boards stronger and can create more angle than my Special Agent, giving it a slight carry advantage on off hits.  

Overall: 9/10; Great ball for heavier/longer patterns, not so bad for medium length patterns either.  You just have to know when the right time to put this ball down before you begin to plink corners.  Overall very happy with the results this ball has given me.  

Thanks for reading.
-------------------
Dave Lughermo
Michigan State Bowling
Title: Re: Dimension
Post by: Mr Straight Ball on January 29, 2009, 11:42:24 AM
Wt: 16.1 - Pin 2.5” - Tw: 3.2- Pin to PAP 4 ¾” (roughly)
Surface: An old 2,000 abralon which left a slight shine and not tacky

O.O

..CG

.O

This is my second Dimension™ as I “trick” drilled my first one to use when the lane blows up and I need a big ball that revs up and just refuses to read the friction. Two things bought me back for a second helping:

  1. My first one carries so well but because of the layout, it needs “its” look to shine.
  2. My friend bought one after I told him too, so I threw his 15# (4” pin to PAP) and saw it, A. hooked and B. had mucho miss area.


It was predetermined before the ball landed in my hands that I was drilling the pin in the ring with the CG down from the ring finger. I was thinking a ball between the one I have and the big hooker my friend owns. So I went with a “rolly” layout for me, pin in the ring finger one of my favorite layouts. What I ended up with is a big ball that is easy to get down the lane and makes a controllable arc throughout the mids and backs. The ball is pretty responsive to release changes and easy to see what it's going to do.

So far I have used this ball playing inside (inside starts at the 3rd arrow by the way) with my hand going around the side a little and I have used it on a flat shot where I have to keep my hand up the back to control any change in direction.
------------
A weight hole has not been ruled out and of course more surface changes - I’ll update the post as needed…
--------------------
Baker...Why doesn''t my ball hk?
40 Boards & A Ball - www.40boards.com
Is your Ball ready to cross 40 Boards?

40 Boards is proudly supported by Storm Products & Stepp''s Glen Burnie Pro Shop
Title: Re: Dimension
Post by: greenefam on February 10, 2009, 11:50:50 AM
Specs:

me - slow to medium speed tweener.  PAP 4 3/4" right 1/4" up
ball - 15+ lb approx. 3" pin, layout 5 x 3, finish 1000 abralon

I got this ball as my heavy oil 'up the boards ball' to replace a Special Agent with a similar surface and layout.  Drilled it relatively tame but changed the surface to 1000.  As expected this ball needs oil.  On a 40' house shot I really can only use it no more than 2 games max. on a fresh shot.  In fresh oil the the Dimension kills straight up 9 with excellent carry.  However, as I move left with breakdown I can still get to the pocket but after a while I loose angle and I have to put it away.  Similar situation for Scorpion (more around 11 board) but as the shot breaks down I loose carry.

Overall the Dimension is a good fresh oil ball for me.  When the lanes require a steeper angle of entry there are better balls for that.
Title: Re: Dimension
Post by: unotko on February 24, 2009, 11:07:17 PM
Storms Dimension is a strong and reliable ball for multiple patterns and shots. This ball was first drilled with pin under and between the fingers with a 45 degree kick out with out of box surface. This previous drilling didn’t match me up for me and the patterns I bowled on. I then re-drilled the ball with pin over the bridge and cg kicked to the right approximately 20 degrees, and then a polish was added. (4 ½” X 4”) This was an experiment drilling with the pin location and polish. It turns out that it is now one of my favorite balls in my bag. It was fun playing with this drilling and coming up with such a great setup. This drilling reacts more down the lane off of the dry with the polish and continues its power through the pin with great hitting power.

Picture of Drilling: http://www.facebook.com/l.php?u=http%3A%2F%2Fs99.photobucket.com%2Falbums%2Fl308%2Funobowler01%2F%3Faction%3Dview%26current%3DPicture007.jpg&h=e8321c951dd2df664d18fd5008ce90ce
Title: Re: Dimension
Post by: Mav_Senior87 on February 24, 2009, 11:38:15 PM
See Profile for stats

http://s99.photobucket.com/albums/l308/unobowler01/?action=view¤t=Picture019.jpg

3" x 4"

This ball is great in the oil.  It reads the mid-lane well and creates a smooth arc to the pocket.  The advantage to a ball like this is that you don’t run the risk of over-hooking but the ball retains power through the pocket.  First time out in league with this ball I fired 300, 279 and 245 for an 824 series while having not thrown it in practice.

I prefer to use this ball in oily conditions where you want the ball to have consistent reaction and not hit too hard on the back-end.  Personally I like this ball on the Shark pattern where I can keep it direct.  However, when the lanes dry out this ball still remains a good choice because it won’t snap too hard on the back.  The only thing you have to watch for is early roll when the heads begin to dry up.

I suggest this ball to players looking for a smooth and powerful reaction and who like to play up the lanes in oily conditions.
Title: Re: Dimension
Post by: Mavbowler01 on February 24, 2009, 11:39:07 PM
My storm Dimension is the most aggressive ball in my bag with a layout of4 ½” X 3 .  It gives me a strong consistent read on most conditions with a strong continuous backend. I have found to use this ball when my Hy-Road has too much skid and doesn’t read the mid-lane well. Overall this ball is my top three favorites in my bag.
Title: Re: Dimension
Post by: tagjlm16 on February 24, 2009, 11:46:15 PM
This ball is the first out of my bag in just about every tournament.  This ball hooks on high volume oil patterns.  I like this ball because it gives me great pin reaction when it is key with long patterns.  

My Dimension is laid out 4x3 with the pin over my ring finger and no x-hole.  This lay-out lets the ball roll read the lane early but still gives me good hook and hit in the back end especially on more difficult sport conditions.

http://i99.photobucket.com/albums/l308/unobowler01/DSCN12130006.jpg

--------------------
James McTaggart
(University of Nebraska at Omaha)
Team Storm
Title: Re: Dimension
Post by: bowlingbear on March 02, 2009, 04:37:12 AM
Just got it drilled on Fri.and tried it in league(THS)I ALWAYS have to mess with the thumb hole a little at first.Once I got the feel I wanted.I shot 243.I had it drilled to be a little smoother than my 2nd.Dim.I can play outside after the oil is pushed out and it recovers great.
More to come after I've got more games on it.
Jeff(A.K.A.The Bowling Bear)
Title: Re: Dimension
Post by: Bigmike on July 22, 2009, 05:36:25 PM
See profile for stats.

Lay Out: 5" from PAP at 40* PAP angle and 75* VAL angle. The pin ended up under my ring finger. There is a 7/8" weight hole 2 1/2" down the VAL drilled 3" deep.

Surface: I have left it box which is 2000abr.

Purpose: This was a warranty replacement for an Attitude Shift that I just loved. I spoke with Victor at Storm and described what I loved about my Attitude and this was his suggestion. This ball puts an earlier, stronger surface slower-response ball in my bag.

Lane condition Observations: I have thrown this on Kegel's Middle road pattern, our house shot, and the PBA X Viper. The surface/cover gives me a good strong read but the layout helps it slow down on the backend (control). I have used this ball when there is more oil in the front and the back is clean since it "lays off" and keeps me close until the pattern starts to transition.

Final thoughts: I believe that folks forgot how good this ball really was as "Virtual Gravity" mania swept the league bowling world. Tournament players can benefit from having a stronger coverstock ball like this that is slower response. This type of ball lets you control the longer patterns on the fresh until the lanes change and you need a stronger response off the friction like a VG or Rogue Cell. This can also be a great ball for the whackers in the crowd as it will slow down in the back kind of like the old Big B reaction of a few years ago.
--------------------
"Why don''t you call me sometime.....when you have no class" ~~Rodney Dangerfield to his college professor in Back to School ~~1986

Mike Craig - Storm Products Pro Shop staff -Columbus, OH
Title: Re: Dimension
Post by: brophyk2 on October 15, 2009, 07:19:41 PM
very visital ball. able to play around all types of bowlers and bring out their strong points. depending on drill pattern the ball may be used on any surface.
--------------------
Kevin Brophy William Paterson Bowling Team
Title: Re: Dimension
Post by: willypbowler1 on October 19, 2009, 06:40:34 PM
My Dimension is drilled pin under the ring finger CG kicked off the midline with a low weight hole. This ball is my strongest ball in my arsenal and has almost the same drilling as my VE. This ball can be used on the heaviest of oil patterns and will still roll strong enough to reach the pocket. Great ball to play up the boards with as well as deep inside. It has a good roll and can turn the corner and carry well from the inside part of the lane.
--------------------
Kenny Hynes
William Paterson University Bowling Team
Sponsored by STORM Bowling

In the bag...

Dimension
Virtual Energy
Hy-Road
Fast
Rapid Fire
ICE Storm
Title: Re: Dimension
Post by: Dimenison300 on June 23, 2010, 12:53:59 AM
First I got this ball from a friend and tried it out that night.The first shot I threw was pretty much dead flush. It has a very strong backend and ever since that night i throw this ball every time I bowl. My high game is 215 with this ball alone including spares. I sugest that people who love storm and want good pocket shots  GET THIS BALL  it ROCKSSS!!!!!!!!!!!!!!!!!
Title: Re: Dimension
Post by: jake carnahan on January 24, 2011, 11:35:27 PM
LANE CONDITION

Length: It hooks up mid-lane and has a great smooth arc to the pocket.
 
Volume: Medium oil

Type (THS, Sport Pattern etc): House pattern, but a little more difficult.

 
COMMENTS

Likes: I love the smooth turn it makes. Been shooting the highest 3 game sets ever with this ball! would buy another 5 if I had the money!

Dislikes: Wish it had a little more hook in it when it turns to hit the pocket. Have to play a little inside my other stuff!

 
PICTURES AND/OR VIDEOS