win a ball from Bowling.com

Author Topic: Jolt Pearl  (Read 9979 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
Jolt Pearl
« on: December 31, 1969, 06:00:00 PM »
Ball NPS Score: Not Available
TEN IN THE PIT! With the introduction of STORM''s exciting new JOLT and JOLT Pearl comes a newly developed and dynamic weight block. Combining the world-class ACCU-Treadâ„¢ coverstock and innovative multi-density weight block ensures a strong, consistent reaction every time.

JOLTâ„¢ PEARL Technical Specifications Coverstock ACCU-Tread Pearl Reactive  
Weight Block Modified 2-piece
Ball Color Purple / Gold
Ball Finish 1500-grit Polish
Durometer 75-77  Rex D-scale
Flare Potential 3" (Med-Low)
Fragrance Fruit Slices
Weights 10 - 16 lbs.
SKU# TJP
JOLTâ„¢ PEARL Ball Dynamics Ball Weight Radius of Gyration Differential Mass Bias Diff.
16# 2.54 0.035  
15# 2.54 0.035  
14# 2.54 0.035

 

saefrog

  • Newbie
  • *
  • Posts: 1
Re: Jolt Pearl
« Reply #1 on: February 15, 2007, 07:09:05 PM »
I wanted a skid flip ball and I average about 200.  My girlfriend gets Brunswick balls at cost so I had been using Brunswick.  I have a slow speed high rev approach.  This is very bad for Brunswick balls because they tend to hook early and hook a lot.  Most of the time with a Brunswick ball my leg is on the ball return.  At any rate everyone said the Radical was a good skid flip ball from Brunswick.  I bought a Radical and a Jolt Pearl per the request of my friend who is a PBA bowler. I drilled both balls the exact same as a skid flip ball with the pins and CG the same.  The Radical did skid far but broke a foot earlier than the Pearl Jolt.  Also, when the radical hooked it was very weak and hit the pocket soft.  The Pearl Jolt on the other hand slid farther and when it hooked it hooked hard and crushed the pocket.  The Pearl Jolt also was not over reactive like the Radical.  With the radical if you let up on it, it would die in the back end and if you put a little extra hand in it, it would overreact and go brooklyn.  At any rate I gave the radical away for free and use the Jolt Pearl as my #1 ball.  It’s an amazing skid flip ball and does not over react.

RobK300

  • Jr. Member
  • **
  • Posts: 29
Re: Jolt Pearl
« Reply #2 on: February 27, 2007, 04:48:05 PM »
I drilled up the Jolt Pearl to have a weaker skid/flip ball to deal with the dry conditions we see quite often in the UK. We often encounter dry heads and I was looking for a ball to get down the lane well. I had the ball drilled with the pin above my fingers 5" from my PAP (stats are in profile).

First impressions of the ball were "Why is this ball called the Jolt?". I was amazed just how smoothly this ball responds to friction, especially when its named Jolt! I was also suprised just how good this ball is at squaring up to a lot of patterns, espeically on higher friction lane surfaces. Infact on these types of surfaces I can even start out with the ball and not have to worry about over-reaction on the backend.

This ball is one of the 'hidden gems' of the Storm line and shouldnt be overlooked for players looking for length with a smooth breakpoint in higher friction environments.

As with all balls, be sure to discuss them with your pro shop operator before drilling to make sure it matches your game.
--------------------
Always Bowl up a Storm!

http://www.stormbowling.com

Bigmike

  • Hero Member
  • *****
  • Posts: 1068
Re: Jolt Pearl
« Reply #3 on: January 14, 2008, 09:24:12 PM »
See stats for profile.

Lay Out: 4.5" from PAP at 45* PAP angle and 65* VAL angle. The pin ended up slightly under my ring finger. I put a weight hole 1" down on my VAL after I threw it for a few games to increase the flare ever so slightly in the midlane and to raise the small bowtie off the middle finger.

Surface: I had left it box which is 1500 reacta-shine.

Purpose: To give myself a ball for shorter distance (37 ft or less) and burnt conditions.

Initial Observations: I threw it some on our leftover league shot which is on second shift. I was striking a lot going up the lane with the Jolt Pearl and also getting to the hole slightly swinging the track.

Final thoughts: I wanted another option for patterns like Cheetah or Viper on wood surfaces where there can be some early burn. I threw this in a PBA regional a few weeks back that was on Cheetah on wood. Cheetah has been tweaked somewhat in that you can't just throw it towards the gutter and get mega-hook, and that you have to be just a little more precise in how early you hit the outside 2-3 boards. Still higher-scoring, just not stupid easy. I pulled out my Jolt Pearl and really squared up the lane looking at arcing it out to about 2 at 35 feet. This ball gave me a great look in fact, I threw the front ten one of the games.

Additional Thoughts: The Jolt Pearl looks like a ball that can be drilled to get some length for some of the shorter patterns. Strong players would probably appreciate the length and hit. This is a solid replacement for the Hot line with tried and true coverstocks around a weightblock that doesn't overpower the ball.

--------------------
Mike Craig-Columbus, OH
"Tell me Cup, how does a great ball striker like you shoot an 83? Well I lipped out this putt on 18......"

Mike Craig - Storm Bowling Amateur Staff - Westerville, OH

louie

  • Hero Member
  • *****
  • Posts: 1008
Re: Jolt Pearl
« Reply #4 on: November 09, 2008, 04:27:55 AM »
15# ball with a one inch pin. Drilled pin next to ring with the cg right below it. Fingers drilled deep to get out excess finger wt. No weight hole.

I Drilled the Jolt Pearl up to slot above my Liberator. I roll the Liberator 90% of the time, but I sometimes need something a bit stronger. Out of box the ball was very clean through the heads but a bit much on the back end. I sanded to 4000 abralon and put on a couple of coats of control it. The ball is still very clean through the first 2/3 of the lane. It makes a nice strong finish on the backend but it is now a strong arc rather than a violent snap. If my Liberator can't make the turn, I can stand a bit deeper with the Jolt Pearl and the ball will make the turn. Good pocket % and excellent carry.

This is a nice reactive pearl with above average hit and control. Well worth the price of admission. If the aggressive balls are to much for the oil volume you see, give the Jolt a try and you won't be disappointed.
--------------------

Why does everyone laugh when I bowl?


louie

Why does everyone laugh when I bowl?


louie


jstamour

  • Jr. Member
  • **
  • Posts: 5
Re: Jolt Pearl
« Reply #5 on: November 10, 2008, 10:53:47 AM »
16 Lb, Pin above ring finger, Med-heavy Oil, 13.8mph, high rev.

I've used a Jolt solid for a couple of years now and decided to get a pearl to get more length when needed.  The Pearl cover is certainly a different ball than the solid, however I believe the 2 compliment each other nicely.  The Pearl does go longer but hit's quite a bit harder.  It very forgiving if you under rev the ball and will come back very hard if you over rev it.  Excellent control.  The Jolt series is truly a Bargin if looking at price for performance.

HAMMERDOWN103

  • Hero Member
  • *****
  • Posts: 520
Re: Jolt Pearl
« Reply #6 on: December 12, 2009, 08:12:26 PM »
Ball is drilled pin above middle finger with cg under ring finger (no thumb). Bought this ball to provide a ball with a weak shell that wont over react on drier conditions and would keep me in control with all my revs. Rolls nice and smooth on the backend but with amazing control even in oil. Took the surface to 4000 abralon to keep it smooth and let it handle a touch more oil. Thanks to Monty Stratton at Bowler's Depot Oceanside.
--------------------
Real MEN throw it right off the press!!!
HAMMERDOWN!!!