win a ball from Bowling.com

Author Topic: Virtual Energy question  (Read 2185 times)

Cobberz

  • Jr. Member
  • **
  • Posts: 87
Virtual Energy question
« on: January 10, 2010, 10:14:52 AM »
I have a virtual energy drilled pin down.  I like the roll i get with it but it hits like crap, im just wondering if anyone has taken the polish off this ball, and what kind of reaction it might have without it?

 

Mr Straight Ball

  • Hero Member
  • *****
  • Posts: 1021
  • 1 board or bust!
Re: Virtual Energy question
« Reply #1 on: January 10, 2010, 06:32:08 PM »
I too have a pin down VE but it is money! It's like any ball, it handles changes to the cover fine. Don't use more surface than needed for what you're playing on. Good luck.
--------------------
Bakes...Why is the 9-pin standing?
40 Boards & A Ball - www.40boards.com
Is your Ball ready to cross 40 Boards?
40 Boards is proudly supported by Storm Products & Stepp's Glen Burnie Pro Shop
Bakes...Bevel is for wimps!!!
Storm Products, Inc. family member
40 Boards & A Ball - www.40boards.com
Storm Products, Inc. - www.stormbowling.com
Ko's Glen Burnie Pro Shop

flipit2x

  • Jr. Member
  • **
  • Posts: 11
Re: Virtual Energy question
« Reply #2 on: January 11, 2010, 08:44:33 AM »
adding some surface to the ball will only amplify your problem, it would get the ball to roll even earlier and lose the energy earlier thus the reason why the ball doesnt hit as hard as you want... try polishing it, it will go a little longer down the lane (not much) but it will have more energy into the pocket

Goof1073

  • Hero Member
  • *****
  • Posts: 2433
Re: Virtual Energy question
« Reply #3 on: January 11, 2010, 09:29:44 AM »
quote:
adding some surface to the ball will only amplify your problem, it would get the ball to roll even earlier and lose the energy earlier thus the reason why the ball doesnt hit as hard as you want... try polishing it, it will go a little longer down the lane (not much) but it will have more energy into the pocket
You can't say that without watching him bowl to see why he states it's hitting like crap.  It is possible that the ball is skidding too far down-lane or isn't reacting in carry-down...both of which sanding could help.
--------------------
-Chris: DJ's Pro Shop : Auburn, MA

Monster Pike

  • Hero Member
  • *****
  • Posts: 19904
  • Be careful what you wish for...;)
Re: Virtual Energy question
« Reply #4 on: January 11, 2010, 09:45:16 AM »
Well Cobberz has not posted what conditions he's bowling on.  I don't want to speak for them, but I believe they are assuming he's bowling on a THS or some version of it & the lanes are more than likely medium light to light oil. I know we haven't seen anything above medium light in our house to start league practice let alone games. Virtual Energy is a strong ball.  So their answers would fit based on those conditions.  Just my 2 cents.
--------------------
Monster Pike

Proud to have served in the U.S. Army!!

Cobberz

  • Jr. Member
  • **
  • Posts: 87
Re: Virtual Energy question
« Reply #5 on: January 11, 2010, 09:50:41 AM »
i would consider it a medium shot, i do not have to move much if at all over the period of three games, but i have yet to throw the VE for more than a few balls, because i know i have a better look with something else in my bag.  I'm going to work with it today when i go practicing, and ill post how it goes.

joblo1978

  • Jr. Member
  • **
  • Posts: 81
Re: Virtual Energy question
« Reply #6 on: January 13, 2010, 11:20:50 AM »
quote:
i would consider it a medium shot, i do not have to move much if at all over the period of three games, but i have yet to throw the VE for more than a few balls, because i know i have a better look with something else in my bag.  I'm going to work with it today when i go practicing, and ill post how it goes.


I'm curious to know what you get a better look with over the ball of 2009 according to bowlers journal.  The ball is a hybrid and generally for medium to heavier condition.  Without exactly seeing the ball roll I can only advise you to polish it more or going to a higher grit finish on it.  I'm not a fan of early rolling layouts and don't see why someone would put one on a VE.  If it's not hitting for you or carrying well it's expending it's energy too quickly and you need polish.

That ball hits nasty in my personal experience.

stormed1

  • Hero Member
  • *****
  • Posts: 1755
Re: Virtual Energy question
« Reply #7 on: January 13, 2010, 01:12:56 PM »
Just for comparison purposes what balls ARE working for you?
--------------------
Arsenal: Mega Friction, S-75, Break Point x 2, Break x2,Clutch x,Maniac,Awakening,Lunatic,SX-1,Link,Hype urethane,Global Globe, 14# golden globe

http://s485.photobucket.com/albums/rr220/stormed1/My%20Arsenal/
Bowlingboards.com
Current arsenal


Break Down 60x4.5x60 @3k+polish
coming soon X,Desert Ops,Special Ops, Shadow Ops., Truth Pearl ,Drift

Cobberz

  • Jr. Member
  • **
  • Posts: 87
Re: Virtual Energy question
« Reply #8 on: January 13, 2010, 08:47:07 PM »
pretty much everything i have in my bag works better, hence why i haven't really thrown my virtual energy much.  I practiced with it the other day and worked with it, but between my black widow, and virtual gravity, i need nothing else during league.

rvmark

  • Hero Member
  • *****
  • Posts: 803
Re: Virtual Energy question
« Reply #9 on: January 13, 2010, 08:52:31 PM »
I have my VE drilled pin up and the ball is money when I bowl at a center that puts out a medium to med heavy shot.  Hits hard and really mixes the pins.  Would agree with the more polish and for my game I would not put a pin down drilling.  

Mark

StickZ

  • Sr. Member
  • ****
  • Posts: 306
Re: Virtual Energy question
« Reply #10 on: January 13, 2010, 09:03:40 PM »
i agree with you mark...pin down doesnt work for me at all...pin over is so money for me...idk why. never had any luck pin down
--------------------
Career High Game: 300x2
Career High Series: 774
High Game 09'-10' Season:279
High Series 09'-10':715


KiDSGoTGaMe


Xcessive_Evil

  • Hero Member
  • *****
  • Posts: 1853
Re: Virtual Energy question
« Reply #11 on: January 13, 2010, 10:56:47 PM »
I have a VE that I was going through alot of surface changes with.  I found for me this VE performed at its best at 2000 with polish, on either a fresh medium-heavy shot or a heavy shot that is broken down pretty bad.
--------------------
www.youtube.com/track8401

http://smg.photobucket.com/albums/v690/Phoenix_RsX/Arsenal/

jls

  • Hero Member
  • *****
  • Posts: 18398
Re: Virtual Energy question
« Reply #12 on: January 15, 2010, 10:52:28 AM »
The word is that Buddies Pro Shop is selling this ball for $129 plus $18 to be drilled......According to fishbowl.......

That's a great deal....

Maybe Hundreds and hundreds of pro shops will see this and think twice about re-ordering them from Storm....

Thanks again Storm for your support to pro shops...
--------------------
jls