win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: WHAT SURFACE TO USE?  (Read 1590 times)

xxxxxxxxxxxx MR300

  • Full Member
  • ***
  • Posts: 207
WHAT SURFACE TO USE?
« on: July 09, 2008, 06:07:54 AM »
Here is the oil pattern picture.

http://www.bowl.com/Downloads/pdf/tournaments/YouthOpen/08lanes.pdf

I have a Secret Agent 1000 grit and a Special Agent 2000 grit. I want to change the surface on them for this tournament but I don't know what to change them to for this oil pattern. Any help will be appreciated.

Also check out my videos in my signature. Comment on them also.
--------------------
MY CURRENT ARSENAL  
  • STORM SPECIAL AGENT  
  • STORM SECRET AGENT
  • STORM ICE STORM  

BOWL UP A STORM The ball used in the video is a Secret Agent
Logged

 

KDawg77

  • Hero Member
  • *****
  • Posts: 11594
Re: WHAT SURFACE TO USE?
« Reply #1 on: July 09, 2008, 02:14:32 PM »
Without seeing your videos thanks to my work's firewall, I would say you could go "out of box" and be fine. This pattern seems similar to Reno's USBC Open pattern last year. It was very playable. I used a Black Widow and SR300 both at 4000 grit dull.

By your stats though, you might want to leave them as is. The real issue no matter your surface prep is accuracy. Control the pocket and leave easy spares. Try not to get the ball out wide.
--------------------
Ken
Videos at http://www.putfile.com/k-dawg77
http://www.myspace.com/lefthandedhammerpride
http://khlthe2nd.bowlspace.com
http://members.bowl.com/FindAMember/memberView.aspx?mp=418&ms=2006&s=2006-2007
Logged

xxxxxxxxxxxx MR300

  • Full Member
  • ***
  • Posts: 207
Re: WHAT SURFACE TO USE?
« Reply #2 on: July 09, 2008, 02:19:16 PM »
Thanks. I had a very similar mind-set to try and control the pocket but leaving easy spares makes it alot easier.
--------------------
MY CURRENT ARSENAL  
  • STORM SPECIAL AGENT  
  • STORM SECRET AGENT
  • STORM ICE STORM  

BOWL UP A STORM The ball used in the video is a Secret Agent
Logged

Xfest

  • Hero Member
  • *****
  • Posts: 2772
Re: WHAT SURFACE TO USE?
« Reply #3 on: July 09, 2008, 02:22:47 PM »
Looks like you can play outside a bit. I would keep them the same and just kind of play how the lanes will let you play! There is so much to seeing a shot on paper, until you actually bowl on a pair, will you know what you are doing.
--------------------
http://www.kennyskidmorebowling.com
Stand left, throw it right, and strap it like a trojan!!
Logged
- Kenny "The Kid" Skidmore
The Bowler's Shop, Anderson IN
      "Now that's MONEYYY!"

mmcfarland300

  • Hero Member
  • *****
  • Posts: 1180
Re: WHAT SURFACE TO USE?
« Reply #4 on: July 09, 2008, 02:59:51 PM »
Take some scotch brite and make adjustments after you throw some practice.
Logged

xxxxxxxxxxxx MR300

  • Full Member
  • ***
  • Posts: 207
Re: WHAT SURFACE TO USE?
« Reply #5 on: July 09, 2008, 08:14:01 PM »
I would like to use some Scotch Brite but in the tournament rules it says after your first shot in practice what surface is on your ball is what it stays at. I would try to sneak it in but if I get caught it is automatic no warning disqualification. I don't want to risk that.
--------------------
MY CURRENT ARSENAL  
  • STORM SPECIAL AGENT  
  • STORM SECRET AGENT
  • STORM ICE STORM  

BOWL UP A STORM The ball used in the video is a Secret Agent
Logged

SVstar34

  • Hero Member
  • *****
  • Posts: 5452
Re: WHAT SURFACE TO USE?
« Reply #6 on: July 09, 2008, 09:43:56 PM »
I'd say your Secret Agent should work well, and maybe take the Special Agent to 4000 Abralon and then scuff it with scotchbrite
--------------------
My Arsenal:
Twisted Fury
Raw Hammer Pain
Blue Vibe



Edited on 7/9/2008 9:44 PM
Logged
Pages: [1]
« previous next »