win a ball from Bowling.com

Author Topic: 716C  (Read 16948 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
716C
« on: December 31, 1969, 06:00:00 PM »
Ball NPS Score: 100.00
- Color: Orange/Black/Green
- Core: Modified Robot
- Core Type: Asymmetrical
- Coverstock: UPM Gen5C Solid
- Finish: All New 500 1000 2000 polished
- RG: #16-2.52, #15-2.51, #14-2.54
- Differential: #16-.045, #15-.057, #14-.051
- Reaction: Continuous / Control
- Recommened Lane Condition: Medium-Heavy to Heavy
- A few tiny pit holes in the cover stock of the ball are normal
- Ball comes with a microfiber cleaning sack with instructions on its use.

- Description: The Manufacturer’s Intent for the all new 716C is to be an improved version of 2010’s 715C. On February 2nd, 2010, we introduced the 715C to the world. Since then we have been working on a new-and-improved version, designed to be used in a larger volume of oil but still offering bowlers the controlled arcing motion they expect. We also feel this ball is a more versatile product for the masses. We listened to all the feedback on the 715C – likes and dislikes – from pro shops, consumers and online users. You will notice the Robot core has been adjusted and is much more differential than the Catback core. We upgraded to the all “NEW” UMP Gen5C Solid coverstock and have removed the Pearl Essence that was used in the 715C. This new version will undoubtedly be a hit in the Track line. We have also used a brand new surfacing process, our three-stage factory sanding system. This all-new process for Track removes one sanding stage and therefore uses only three: 500, 1000 and 200 giving a more aggressive footprint on the lane. Also, remember, if you need a more aggressive reaction, our covers are easy to adjust.

 

TrackMill07

  • Jr. Member
  • **
  • Posts: 10
Re: 716C
« Reply #1 on: September 30, 2011, 07:15:49 PM »
LANE CONDITION

Length: 42ft
 
Volume: Meduim

Type (THS, Sport Pattern etc): USBC White #2

 
COMMENTS

Likes: Absolutely love the way this ball rolled. It was exactly what it says it is. The ball very amazingly predictable off the spot and very even. Loved that I always knew EXACTLY what my ball was going to do down lane. It was just strong enough to carry when I pulled it in a board or two, and clean enough through the front to get back to the pocket and carry when I fanned it right a board or two. My area increased immensely with this ball. It was perfect.
My layout for this ball was 80* x 4.75" x 55*
Surface preparation: 4000 dull
Dislikes: NONE

 
PICTURES AND/OR VIDEOS
 
 
 
 



nexgenTrack

  • Newbie
  • *
  • Posts: 1
Re: 716C
« Reply #2 on: October 06, 2011, 01:29:26 PM »
LANE CONDITION

Length:42
 
Volume:

Type (THS, Sport Pattern etc):House Shot

 
COMMENTS

Likes: This Ball is the best track ball i have ever thrown. Very smooth and controllable off the dry nice even arc. Its one of the things they have been missing in the 7 series line. Strong ball motion but really smooth. I think this should be a ball that every one should own.

Dislikes: 

 
PICTURES AND/OR VIDEOS
 
 
 



vcuguy324

  • Jr. Member
  • **
  • Posts: 8
Re: 716C
« Reply #3 on: October 11, 2011, 03:57:19 PM »
LANE CONDITION






THS and 41 ft 2:1 flat

 



COMMENTS




If you enjoy the ball motion of the 503C then you are going to be very excited for the similar yet stronger ball motion of the 716C.  This is another ball that is very smooth off the spot, it doesn't give you the big snapping motion on the backend.  Compared to the 718A this ball is going to pick up sooner and be a more continued roll as opposed to the longer/snapier reaction of the 718A. The earlier/continued roll has helped me to keep the pins lower and taken the number of corners left way down.  The stronger move does allow me to get deeper on the lane than I can with the 503C.  I have drilled two, one with a 1" pin under the ring finger with the mass bias kicked way out, the other with the pin over the ring finger and the mass bias to the left side of the thumb.  The 1" pin I have left with the box shine on it, the other I have knocked the shine off and it gives me a little earlier roll for the heavier volumes.

If you need a big brother to your 503C you will not be disappointed with the 716C. 



 


PICTURES AND/OR VIDEOS

 

 

 


Mike McDonnell

Track Regional Staff

Richmond, VA

Percision Shot Making

  • Jr. Member
  • **
  • Posts: 14
Re: 716C
« Reply #4 on: October 19, 2011, 02:20:23 PM »
Well here's a review on the 716c. The 716c is a great compliment to the 503c, in my opinion the ball is about 2 feet earlier and 6-7 stronger down lane. I went with a standard layout for me, pin: 12 o clock mb: 35 degrees. This ball is wonderful on those fresh back ends and free hook right or left. I get great push threw the front part of the lane and strong continuous motion in the back end all the way through the pins. If you have a 503 and need something a bit stronger for the fresh this is your ball, or if you feel like the 718 is too jumpy later in blocks the 716 is a great piece to have. Another great piece from Track.
 

 

 

 

 

Howard Ball Jr.

Track Amateur Staff

Vise Amateur Staff

 

Pap: 5 3/8> 1/2^

Rev Rate: 419










 


 

 

 

 



Pinoy25

  • Jr. Member
  • **
  • Posts: 46
Re: 716C
« Reply #5 on: November 02, 2011, 08:39:31 PM »
LANE CONDITION

Length: 38-40
 
Volume:

Type THS

 
COMMENTS

Likes: Ball motion. Out of box surface and prep

Dislikes: not enough orange color in my ball
 
Drilling 5 X 4 X 2 1/2   pin up
 
pap 6 1/8 ---->  1 1/2 up   speed 15-16mph  350-400revs
 
 
I drilled the ball wanting to be able to play more down the right side of the lane. My pro shop manager said that this was a weaker layout compared to my mutant cell which is 4 X 4 X 1. Talk about  a smooth and controlled motion. Loved how the ball read the lanes and that it was same move to the pocket. In two weeks we are moving to White pattern two and ill post some more feed back. I cant wait to try this out in league. PS This ball hits like a mac truck. I threw about 14 shots and 10 of which hit the pocket, some flush some a little higher, some a light hit. They all carried all the corner pins. Overall my first non storm roto grip bowling ball and I think I am in love. Maybe ill move to track ^.^
 
 
 

 
 
 
 



Trackboy2009

  • Full Member
  • ***
  • Posts: 120
Re: 716C
« Reply #6 on: November 22, 2011, 09:57:24 AM »
LANE CONDITION








Length:36 Feet


Volume:Medium to light


Type (THS, Sport Pattern etc):Los Angeles




 









COMMENTS









Likes:I laid out my 716C with the pin below my fingers and the mass bias strong (45x5 1/2x75) and I also touched up the cover with a 2000 pad. The 716C scouts through the front with consistency and at the break point prevides enough reaction without being too jumpy. It is stronger throughout the lane than 503C and not as reactive as the 607A or the 718A. Compared to the 715C, the 716C is more aggressive and more forgiving. The 716C is the first ball out of my bag when I am on a shorter sports pattern or on a dry house pattern.  




Dislikes:Pushes too far on occasion. 




 






PICTURES AND/OR VIDEOS



 



 



 


Dan Schaden Jr
Track Pro Shop Staff Member
Vise Staff Member
 

Edited on 11/22/2011 at 8:58 AM
 
Edited on 11/22/2011 at 8:59 AM
Dan Schaden Jr
Vise Grip Staff since 2002
Bowlers Corner Pro Shop Owner since 2002

Trackboy2009

  • Full Member
  • ***
  • Posts: 120
Re: 716C
« Reply #7 on: November 30, 2011, 07:28:13 AM »
LANE CONDITION






Length:37

 

Volume:Medium/Light


Type (THS, Sport Pattern etc):Viper


 



COMMENTS





Likes:The 716C allowed me to play the pattern more direct and when I had to go around the pattern I did not have to change balls. The 716C is a combination of both strength and predictablity. It is strong enough to open up the lane but is continuous enough to play straighter. The layout I used in this 716C is 55X4 3/8X 45 and the X-hole on the mid line at 6 inches from center of span. The surface is 4000. I was not a big fan of the 715C but the 716C is a keeper for me.... I am going to drill one more I think!


Dislikes: Sometimes pushes a tad too far down lane.


 


PICTURES AND/OR VIDEOS

 

 

 


Dan Schaden Jr
Track Pro Shop Staff Member
Vise Staff Member
Dan Schaden Jr
Vise Grip Staff since 2002
Bowlers Corner Pro Shop Owner since 2002

htownstaff

  • Full Member
  • ***
  • Posts: 170
Re: 716C
« Reply #8 on: December 07, 2011, 10:02:32 PM »
LANE CONDITION






Length: 41

 

Volume:


Type (THS, Sport Pattern etc): THS


 



COMMENTS





Likes: I like the fact that this piece is clean in the fronts and gives a bit stronger read than the 715C did in the mids.  The overall reaction shape is fantastic.  It's a strong controllable read off the dry.  This is a great ball if you are looking to stay in the same area of the lane as your 718A without the big move off the spot.  It's also a great piece if you have to ball up from the 503C.  It has the same predictable, controlled arc that all of the C balls have been known for.  To sum it up, the 716C is the a great benchmark piece for the fresh.


Dislikes: The footprint of the cover tends to slow up the reaction through the later transition, but that is not when this ball was designed to shine.


 


PICTURES AND/OR VIDEOS

 

 

 


Brian Krantz
Track Amateur Staff
Building The Legion one member at a time!

-This is ten percent luck, twenty percent skill
Fifteen percent concentrated power of will
Five percent pleasure, fifty percent pain
And a hundred percent reason to remember the name!

DeadWood Pro Shop

  • Full Member
  • ***
  • Posts: 136
Re: 716C
« Reply #9 on: January 05, 2012, 06:24:34 AM »
Preface- Track's unique  numbering system is a  great way in my opinion to decide what ball would  likely be the best  choice to fill a gap. Pick your ball strength 9-1,  then decide whether  you need Continuation, Traction, Angular, or  Control. Now you don't need  to remember what name gives you what  performance.
  
   
 BALL SPECS
     Pin Length - 3-4 inches
     Starting Top Weight - 3
     Ball Weight - 15.4
     
     DRILL PATTERN
     Pin to PAP - 5 in.
     Pin is above the bridge 1/4 inch, cg just to the right of vertical grip line.
     
     BOWLER STYLE
     Rev Rate - 450
     Ball Speed - 18-19 MPH
     PAP/Track - 4 1/4 right, and 3/8 up
     
     PICTURE AND VIDEO LINKS
     Pic
     
http://www.facebook.com/media/set/?set=a.223121184434698.54504.175408269205990&type=1&l=13eed10974
     
     Vids
     http://www.facebook.com/pages/Dead-W...75408269205990
     
     
     SURFACE PREPARATION
     Grit - 2000 grit abralon
     Type (Matte, Polish, Sanded) - Polished
     
     LANE CONDITION
     Length - 35 ft
     Volume -  medium
     Type (Wall, Xmas Tree, Sport) -  Xmas tree. House with guardian heads
     
     BALL REACTION
     Length - 6/10
     Back End - 7/10
     Overall Hook - 7/10
     Midlane Read - 8/10
     Breakpoint Shape - Strong controlled arc.
     
     
     COMMENTS
       Carry - Ball pushes pins all over the deck, and hits very solid.
     Likes - For me the ball is easy to control and very predictable while still being strong
       Dislikes - For the customer I drilled this ball for, his very high  ball speed can create over/under on certain lane conditions
     
 

 Assuming you have a 919C that you are in love  with, I would recommend an 811A and  a 716C to compliment it. The 811A  SE will be good when you need a ball the you can move left with when  there is still oil out on the lanes. The 716C will be the ball  you want on a shorter/dryer shot. It will still give you a strong ball  motion, but a cleaner and more controlled back end. 

 
     Videos of this ball will be posted on my shops Facebook page.
     
     The Dead Wood Pro Shop Staff
     Not on any manufacturer staff, just a pro shop owner that wants the best equipment in my bag


DeadWood Pro Shop
9307 Boone Road
Houston, TX 77099

wert2324

  • Newbie
  • *
  • Posts: 1
Re: 716C
« Reply #10 on: March 13, 2012, 12:57:30 AM »
 I recently bought the 716c and love it. I have pin below middle finger and basically stacked over the cg. Now i also just bout the 503c and was wondering how to drill it so that it compliments the 716c and is less reactive by about 5 boards? Can i drill it the exact same way as the 716c or will that not work? I love pins under fingers if that helps