win a ball from Bowling.com

Author Topic: Surface adjustments  (Read 915 times)

cd

  • Sr. Member
  • ****
  • Posts: 328
Surface adjustments
« on: October 04, 2005, 03:09:07 PM »
How well does the Arsenal Reactive take to surface adjustments?  My pro shop guy recently brought it to 800 grit sanded for me and I was wondering what effect it would have other than making it hook a little more.

  I believe the Arsenal Reactive box finish is 1500 smooth sanded, so it seemed like a big jump to me.  

  I also heard that the Arsenal Reactive will shine up more as it is used, so dulling it back down every once in a while doesn't seem like a bad idea.

  I guess I just have some general confusion about surface adjustments.  Why would an aggressive ball like the Arsenal Reactive have a 1500 grit box finish?  That would go longer right?  It seems pretty smooth for its intended reaction.  

Thanks
cd

 

chitown

  • Hero Member
  • *****
  • Posts: 5876
Re: Surface adjustments
« Reply #1 on: October 05, 2005, 01:33:15 AM »
For me the reactive with it's OOB cover is way to strong for med oil.  I feel the OOB cover on this ball is for heavy oil.  I put a couple coats of magic shine polish on mine and it works great for med oil.

Dulled balls can handle more oil.  Polished balls give more length and backend.
--------------------
TAKE A RIDE ON THE TRACK EXPRESS!
THE REVOLUTION!
RIDE THE LIGHTNING!

clintdaley

  • Hero Member
  • *****
  • Posts: 4246
Re: Surface adjustments
« Reply #2 on: October 05, 2005, 08:13:32 AM »
The exact reason I don't know and only the guys at Track can answer, but I have my hunches. When you combine a LOW RG core with an aggressive cover, if you dull it way down to start, you are really making it condition specific for heavy oil only. By bringing up the surface a little, it becomes more playable for a variety of bowlers and across more conditions and is easier to polish (ever try polishing a 320-400 grit surface ball...almost impossible without bringing up the surface first).

Clint
--------------------
Clint Daley-Owner
Lets Go Bowling Daley
Inside Hunt Club Lanes
Salem, Ohio 44460
TRACK ADVISORY PRO SHOP STAFF

http://www.trackbowling.com/

http://www.startabowlingrevolution.com/










cd

  • Sr. Member
  • ****
  • Posts: 328
Re: Surface adjustments
« Reply #3 on: October 05, 2005, 10:57:26 AM »
Thanks for the information.  

When dulling a ball, is it possible to go too dull, to the point where the ball will not react well enough on the back end?  

Is there some guideline for this?

Thanks
cd

clintdaley

  • Hero Member
  • *****
  • Posts: 4246
Re: Surface adjustments
« Reply #4 on: October 05, 2005, 11:42:52 AM »
Too dull depends on the condition. Bowlers who have no hand (me included) can take a 180 grit ball on use it on what seems like a flood to us, but put that ball in someone's hands who can turn it up somewhat, and the ball will die. Its all realitve...its too dull if it burns out, but that depends on the condition and the bowler.

On edit: I should have also said this is the reason why I do surface adjustments in small steps, not one big step. If the ball is 1500 grit, try 1200 or a 1000. If it still is not dull enough, go to something with more grit until you arrive at the reaction you want. It may tke a few days, but you will be happy you took the extra time in the long run.

Clint
--------------------
Clint Daley-Owner
Lets Go Bowling Daley
Inside Hunt Club Lanes
Salem, Ohio 44460
TRACK ADVISORY PRO SHOP STAFF

http://www.trackbowling.com/

http://www.startabowlingrevolution.com/


Edited on 10/5/2005 11:37 AM










cd

  • Sr. Member
  • ****
  • Posts: 328
Re: Surface adjustments
« Reply #5 on: October 05, 2005, 12:08:19 PM »
Thanks again.  I originally thought the OOB finish on the AR was 900, so I went with 800.  However, I was wrong and it was 1500.  I will try 800 and see how it reacts and go from there.  I can always change back to 1500, if need be.

cd