win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Rising vs No mercy beatn  (Read 1451 times)

micbowl

  • Full Member
  • ***
  • Posts: 141
Rising vs No mercy beatn
« on: November 30, 2007, 01:46:24 PM »
Which one will handle heavy oil better?
Logged

 

Mark T. Trgovac

  • Hero Member
  • *****
  • Posts: 1270
Re: Rising vs No mercy beatn
« Reply #1 on: December 01, 2007, 07:05:34 AM »
The Rising. It will start up alot stronger then the NMB.
--------------------
Mark "scoot" Trgovac
C-G Pro Shop
Offical "Spokesman"
Youngstown, Ohio

Finishing THS book ave: 200
Finishing PBA Experence ave: 176
Finishing Composit ave: 194

Track HITMAN.

Tag Team Coaching Success Story.
Logged
Mark T. "Scoot" Trgovac
Track Staffer
Bowling Ball Driller

dw23

  • Hero Member
  • *****
  • Posts: 986
Re: Rising vs No mercy beatn
« Reply #2 on: December 04, 2007, 03:16:45 PM »
Which one has the most recovery and the sharpest breakpoint off the friction?
--------------------
Thanks,
DW
Logged
Deven Walls

Pro Shop Staff Member
Lord Field/Lane Masters
www.lordfield.com and www.lane-masters.com
"Changing Bowling, One Bowler At A Time"

NJStroker

  • Hero Member
  • *****
  • Posts: 1317
Re: Rising vs No mercy beatn
« Reply #3 on: December 04, 2007, 04:51:58 PM »
quote:
Which one has the most recovery and the sharpest breakpoint off the friction?
--------------------
Thanks,
DW
Well recovery is rising, but the sharpest breakpoint i think is the NMB but sharp breakpoints are not what u want in heavy oil, that will just skate too long IMO.
Logged

dw23

  • Hero Member
  • *****
  • Posts: 986
Re: Rising vs No mercy beatn
« Reply #4 on: December 04, 2007, 05:42:45 PM »
I'm not looking for heavy. I'm looking more for a smooth, heavy medium oil ball with good recovery and finish after reading the friction.

Micbowl is looking for a heavy oil ball. I just kinda borrowed the post for the moment. Sorry!
Logged
Deven Walls

Pro Shop Staff Member
Lord Field/Lane Masters
www.lordfield.com and www.lane-masters.com
"Changing Bowling, One Bowler At A Time"

NJStroker

  • Hero Member
  • *****
  • Posts: 1317
Re: Rising vs No mercy beatn
« Reply #5 on: December 04, 2007, 05:50:59 PM »
O ok, well the nmb and rising are both good, just that rising might be a bit smoother, but u can polish the rising up to make it more angular. NMB will be longer and more angular but u can take the surface down for a smoother reaction on that ball too.
Logged

dw23

  • Hero Member
  • *****
  • Posts: 986
Re: Rising vs No mercy beatn
« Reply #6 on: December 04, 2007, 05:52:31 PM »
I think it's gonna be between the Rising and the Break.

Thanks for your help.
--------------------
Thanks,
DW
Logged
Deven Walls

Pro Shop Staff Member
Lord Field/Lane Masters
www.lordfield.com and www.lane-masters.com
"Changing Bowling, One Bowler At A Time"

NJStroker

  • Hero Member
  • *****
  • Posts: 1317
Re: Rising vs No mercy beatn
« Reply #7 on: December 04, 2007, 06:41:09 PM »
quote:
I think it's gonna be between the Rising and the Break.

Thanks for your help.
--------------------
Thanks,
DW
Your Welcome, just to let you know, the Break will be more angular, but handle a bit less oil.
Logged

dw23

  • Hero Member
  • *****
  • Posts: 986
Re: Rising vs No mercy beatn
« Reply #8 on: December 04, 2007, 07:55:34 PM »
Less oil is cool. I just need midlane read and entry angle.
--------------------
Thanks,
DW
Logged
Deven Walls

Pro Shop Staff Member
Lord Field/Lane Masters
www.lordfield.com and www.lane-masters.com
"Changing Bowling, One Bowler At A Time"

Mark T. Trgovac

  • Hero Member
  • *****
  • Posts: 1270
Re: Rising vs No mercy beatn
« Reply #9 on: December 04, 2007, 10:09:26 PM »
quote:
Less oil is cool. I just need midlane read and entry angle.
--------------------
Thanks,
DW


This would be the Rising also. Only you would want to use the pin above bridge layout. If you use the suggested it will start to soon, and may not give you the entry angle you want. The above bridge layout gives the Rising about 2-3 more feet down lane and about the same recovery, only not as good in the real heavy stuff but for what you want the Rising with the pin above the bridge and the mb at 45 degrees will give you what you want.
--------------------
Mark "scoot" Trgovac
C-G Pro Shop
Offical "Spokesman"
Youngstown, Ohio

Finishing THS book ave: 200
Finishing PBA Experence ave: 176
Finishing Composit ave: 194

Track HITMAN.

Tag Team Coaching Success Story.
Logged
Mark T. "Scoot" Trgovac
Track Staffer
Bowling Ball Driller

jls

  • Hero Member
  • *****
  • Posts: 18398
Re: Rising vs No mercy beatn
« Reply #10 on: December 05, 2007, 09:56:49 AM »
to me,  the rising at 4000, will handle the oil better then the NMb at 4000.  in most cases we take the NMb down to 2000 or 1000 for those who feel they need more surface.

but so far, just about all the rising's drilled, have been used at the box finish of 4000.  with great feedback.
--------------------
jls, proud watcher of womens golf
Logged
Pages: [1]
« previous next »