win a ball from Bowling.com

Author Topic: Please, help me layout my Temper!  (Read 2249 times)

800bowler300

  • Full Member
  • ***
  • Posts: 237
Please, help me layout my Temper!
« on: January 07, 2008, 06:58:07 PM »
Hey guys. I have a NIB Temper that I am looking to drill up. Here is what I am dealing with:

1. Passion - pin up/right of ring, mb in strong (4 x 4 off my PAP) - Heavy Oil
2. NVS - pin over bridge, mb in strong (5 1/2 x 4 off my PAP) - Carrydown
3.
4. Jazz - pin over ring, cg in palm (5 x 5 off my PAP) - Light Oil
5. Dry/R - pin over middle, cg in palm (6 x 5 off my PAP) - Dry Lanes

I am looking to drill the Temper to fit in that slot between my NVS and my Jazz. Right now my NVS works perfect when I run out of room with my Passion, and my Dry/R works right when I run out with my Jazz. The problem is I have a large gap between my NVS and my Jazz. I would like the Temper to go long and roll smooth on the backend. I don't want angularity, I have plenty of that in my bag now. How should I lay it out? I had 3 ideas:

1. Pin at 6 1/2" (slightly negative), mb just right of my thumb
2. Pin at 3 1/2" (slightly right of ring), mb just left of thumb
3. Pin at 2", mb on VAL

What do you Track guys think I should do? Please help me. Thanks.

 

KDawg77

  • Hero Member
  • *****
  • Posts: 11594
Re: Please, help me layout my Temper!
« Reply #1 on: January 08, 2008, 12:18:36 PM »
I thought 5 1/2 up and 45 degrees was an angular drilling.

Try a pin in your ring finger and the MB near your thumb. This will lower the differential and give you a smooth reaction. Use surface changes for length needs.
--------------------
Ken
Sometimes you are the cheetah and sometimes you are the stick...
Videos at http://www.putfile.come/k-dawg77
http://www.myspace.com/lefthandedhammerpride
http://khlthe2nd.bowlspace.com
http://members.bowl.com/FindAMember/memberView.aspx?mp=418&ms=2006&s=2006-2007


Edited on 1/8/2008 1:19 PM

Mark T. Trgovac

  • Hero Member
  • *****
  • Posts: 1270
Re: Please, help me layout my Temper!
« Reply #2 on: January 08, 2008, 01:43:25 PM »
quote:
I thought 5 1/2 up and 45 degrees was an angular drilling.

Try a pin in your ring finger and the MB near your thumb. This will lower the differential and give you a smooth reaction. Use surface changes for length needs.
--------------------
Ken
Sometimes you are the cheetah and sometimes you are the stick...
Videos at http://www.putfile.come/k-dawg77
http://www.myspace.com/lefthandedhammerpride
http://khlthe2nd.bowlspace.com
http://members.bowl.com/FindAMember/memberView.aspx?mp=418&ms=2006&s=2006-2007


Edited on 1/8/2008 1:19 PM


The MB is not as important, even though it is marked. The low MB rating of .003 is way lower then the min number that shows enough affect on reaction. However if the number was higher placing the mb right next to the thumb places it in a stong flip position.
--------------------
Mark "scoot" Trgovac
C-G Pro Shop
Offical "Spokesman"
Youngstown, Ohio

Finishing THS book ave: 200
Finishing PBA Experence ave: 176
Finishing Composit ave: 194

Track HITMAN.

Tag Team Coaching Success Story.

When faced with a problem Chuck Norris asks himself, "What would The Scoot DO?"
Mark T. "Scoot" Trgovac
Track Staffer
Bowling Ball Driller

spinner031

  • Hero Member
  • *****
  • Posts: 1000
Re: Please, help me layout my Temper!
« Reply #3 on: January 08, 2008, 06:36:33 PM »
But the 5 1/2 will still create length.

800bowler300

  • Full Member
  • ***
  • Posts: 237
Re: Please, help me layout my Temper!
« Reply #4 on: January 08, 2008, 08:19:09 PM »
Thanks for the replies so far. Right now I am contemplating combining 2 of your suggestions, and drilling the pin at 5 1/2", IN my middle finger. I am not sure yet what mb placement I will use. I know it is not a high assym, but the pin, cg, and mb are all in line, so it does matter. Thanks.

Mark T. Trgovac

  • Hero Member
  • *****
  • Posts: 1270
Re: Please, help me layout my Temper!
« Reply #5 on: January 08, 2008, 09:18:45 PM »
quote:
Thanks for the replies so far. Right now I am contemplating combining 2 of your suggestions, and drilling the pin at 5 1/2", IN my middle finger. I am not sure yet what mb placement I will use. I know it is not a high assym, but the pin, cg, and mb are all in line, so it does matter. Thanks.


It will only matter for legal static weights. Just place the Pin where you said you are and then get the cg as close to the center of your grip as you can. This will make you not even need a weight hole, or if you do because of top weight. You will not need as big of one.
--------------------
Mark "scoot" Trgovac
C-G Pro Shop
Offical "Spokesman"
Youngstown, Ohio

Finishing THS book ave: 200
Finishing PBA Experence ave: 176
Finishing Composit ave: 194

Track HITMAN.

Tag Team Coaching Success Story.

When faced with a problem Chuck Norris asks himself, "What would The Scoot DO?"
Mark T. "Scoot" Trgovac
Track Staffer
Bowling Ball Driller

800bowler300

  • Full Member
  • ***
  • Posts: 237
Re: Please, help me layout my Temper!
« Reply #6 on: January 09, 2008, 02:38:18 AM »
Thanks, I think that is exactly what I am going to do. I appreciate the help.

adman

  • Sr. Member
  • ****
  • Posts: 415
Re: Please, help me layout my Temper!
« Reply #7 on: January 09, 2008, 04:13:51 AM »
If the MB was out on your VAL and the pin over your ring finger what would that do as compared to the MB next to your thumb in the flip position?

Will it have more of a forward roll and start up earlier and smoother?

Thanks

tenpinspro

  • Hero Member
  • *****
  • Posts: 4161
Re: Please, help me layout my Temper!
« Reply #8 on: January 09, 2008, 04:35:42 AM »
Hey 800, pm sent.
------------------------------------------------

Adman,

Anytime we place the mb (of enough significant strength) closer towards pap, the faster it will pull a weight block down which translates into an earlier rolling ball or should have more of an arcing shape.

On the converse, the further we place it from pap, the longer we delay the motion of the weight block as it goes down lane which can/should translate into more of a skid/flip reaction.  Hope this helps explain some....
--------------------
Rick Leong - Ten Pins Pro Shop  
Track Intl - Tech Support
Vise Inserts Staff
Dexter Advisory Staff

Tag Team Coaching - Co-Founder

See profile for Track Ball videos

*El Presidente of the Track Legion
Rick Leong - Ten Pins Pro Shop
Co-Founder - Tag Team Coaching
"El" Presidente of the Legion