win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Question for the lane graph savvy  (Read 1820 times)

bsone1

  • Jr. Member
  • **
  • Posts: 20
Question for the lane graph savvy
« on: March 13, 2012, 09:41:21 AM »
 

Can a lane graph savvy person please explain to us (me) what is meant by the "ratio" of oil specifically in regards to the USBC Open? How is 25.2 mL of oil at a 2.20-1 ratio different than 27.35 mL at a 2.84-1 ratio?


 


thank you in advance.



Logged

 

riggs

  • Hero Member
  • *****
  • Posts: 1158
Re: Question for the lane graph savvy
« Reply #1 on: March 13, 2012, 10:29:39 AM »
In general, higher the ratio = easier the condition ... so 2.2-1 is tougher than 2.84-1.

 

Sport must be under 3-1.  Blue patterns more like 4-1 and White more like 5-1. House shots get into the 10-1 or more ratio.


Read my 11th Frame blog at http://www.11thframe.com/
Follow me on Twitter @riggs7465

Logged

  • Guest
Re: Question for the lane graph savvy
« Reply #2 on: March 13, 2012, 10:56:04 AM »
In addition to Riggs' good information, if you compare last year to this year, the 2012 pattern is 2 feet shorter, too, with less volume (25.2ml). 
 
My house shot this year is 9:1 so that means there is a huge amount of oil (comparatively) in the middle portion of the lane compared to the outside (1st arrow area). The THS patterns give you hold area if you miss inside, and bump area when you miss outside.
 
The flat ratios make accuracy and repeating shots extremely important or you'll pay the price. If you have a chance to watch any of the live streams of bowlers at Baton Rouge you will notice how "touchy" the shot acts when the bowler misses inside, due to lack of hold area. The "fluffed" shots that swing too far wide tend to come up light or miss the head pin entirely. Hope this helps.
 


Lane Carter, Strike Zone Pro Shops - Salt Lake City, Utah
Allstar Lanes
Brunswick Regional Staff
 
The opinions expressed are solely those of the writer and not of Brunswick Corporation.
 

 
 
Edited by notclay on 3/13/2012 at 8:56 AM
Logged

jaydee

  • Full Member
  • ***
  • Posts: 117
Re: Question for the lane graph savvy
« Reply #3 on: March 13, 2012, 11:05:09 AM »
Can someone also comment on the effect of "reverse oil"?  Last year to this year it doesn't appear to be that much of a difference other than there being some reverse on the outside this year (and thus a little more volume), but I've noticed that some patterns have as much reverse oil as they do forward and I'm curious to hear what the effect of it is.
Logged

bsone1

  • Jr. Member
  • **
  • Posts: 20
Re: Question for the lane graph savvy
« Reply #4 on: March 13, 2012, 11:20:38 AM »
So if I understand correctly, it is basically the ratio of oil from the middle portion of the lane to the outside portion of the lane?


Logged

jaydee

  • Full Member
  • ***
  • Posts: 117
Re: Question for the lane graph savvy
« Reply #5 on: March 13, 2012, 11:26:27 AM »
 



bsone1 wrote on 3/13/2012 9:20 AM:
So if I understand correctly, it is basically the ratio of oil from the middle portion of the lane to the outside portion of the lane?



Yes
 
Edited by jaydee on 3/13/2012 at 9:26 AM
Logged

  • Guest
Re: Question for the lane graph savvy
« Reply #6 on: March 13, 2012, 11:27:43 AM »
If I am not mistaken, reverse oil gives you the "hold area".  The forward oil creates the general shape of the pattern, but lots of reverse helps the pattern hold together longer. Less reverse will do the opposite.
 
The house pattern we use (see above post) is also 19 ml of oil.  The USBC Open uses 25 ml of oil as a comparison.
 
This years' pattern at Baton Rouge will test the shot making abilities of the bowlers without being "impossible".
 
 


Lane Carter, Strike Zone Pro Shops - Salt Lake City, Utah
Allstar Lanes
Brunswick Regional Staff
 
The opinions expressed are solely those of the writer and not of Brunswick Corporation.
 

 
Logged

imholte08

  • Jr. Member
  • **
  • Posts: 89
Re: Question for the lane graph savvy
« Reply #7 on: March 13, 2012, 12:16:10 PM »
Bsone1, this is all good and correct info you are receiving on here. If you want to educate yourself further, read a few of these articles:
 
 
There used to be a few really good articles on this topic, but I think they got deleted sadly. But tons of great info given on many other things. 
Logged
Ebonite Advisory Staff

dizzyfugu

  • Hero Member
  • *****
  • Posts: 7605
Re: Question for the lane graph savvy
« Reply #8 on: March 13, 2012, 01:22:12 PM »
 



jaydee wrote on 13.03.2012 9:05 AM:
Can someone also comment on the effect of "reverse oil"?  Last year to this year it doesn't appear to be that much of a difference other than there being some reverse on the outside this year (and thus a little more volume), but I've noticed that some patterns have as much reverse oil as they do forward and I'm curious to hear what the effect of it is.

Basically, forward oil gradually fades out, when the oil machine moves towards the pins. It creates a transition zone between the "full" oil and the dry lane areas. Reverse oil is applied when the machine comes towards the approach - and it creates a more defined "end" of the application area.

The actual effect must be seen in the combination of both methods, though. But if you have an area that ends in reversed oil, you can expect (recognizable) less room for error and probably over/under issues, because the wet/dry contrast is much harsher than on a buffed forward oiled area, where friction rises gradually. Combined with a relatively flat sport pattern, breakpoint errors are magnified, so spraying will be punished a bit more than just through the flat pattern that offers no (or little) bumper area.


DizzyFugu - Reporting from Germany
2010/11 Benrather BC Club Champion
Confused by bowling? Check out BR.com's vault of wisdom: the unofficial FAQ section
Logged
DizzyFugu ~ Reporting from Germany

230-n-up-or-bust

  • Hero Member
  • *****
  • Posts: 5381
Re: Question for the lane graph savvy
« Reply #9 on: March 13, 2012, 01:26:03 PM »
I believe it's the ratio of oil for the board with the MOST amount of oil in relationship to the board with the LEAST amount of oil applied while in the forward oiling mode.  The finished product may be slightly different due to buffing or reverse oiling/buffing.  I'm sure someone will correct me if I'm wrong.  The 25.2 is the total volume of oil placed on each lane.

Help control the population of Avenging Unicorns. Arm yourselves accordingly. 

"I'd give my right arm to be ambidextrous."-Nick Faldo
"I'm as frustrated as a mosquito in a mannequin factory."-Larry The Cable Guy 
Logged

230-n-up-or-bust

  • Hero Member
  • *****
  • Posts: 5381
Re: Question for the lane graph savvy
« Reply #10 on: March 13, 2012, 01:27:13 PM »
wow...when I looked at this thread there were no replies and now there's almost a dozen.  I'll keep mine there to prove/disprove my intellect...lol

Help control the population of Avenging Unicorns. Arm yourselves accordingly. 

"I'd give my right arm to be ambidextrous."-Nick Faldo
"I'm as frustrated as a mosquito in a mannequin factory."-Larry The Cable Guy 
Logged

Andyman3333

  • Full Member
  • ***
  • Posts: 197
Re: Question for the lane graph savvy
« Reply #11 on: March 15, 2012, 03:49:52 PM »
It's also flat from 13-13 I believe.  So no ratio there.  The little taper that there is will be found outside 2nd arrow.  And from what I've heard and seen, that sounds about right as far as where people are having some success. 


www.brunswickbowling.com
The opinions expressed are solely those of the writer and not of Brunswick Corporation.

PROFILE
340-370 revs
18 mph
Arsenal: (In the bag) Nexxus F(p+r), Nexus F(p+f), Nexus f(p), C-System Ulti-Max, C-System Versa Max, Massive Damage, Karma Pink/Purple.  On the wall, Loaded Revolver, Lethal Revolver, Damage, Slingshot.
Logged
Pages: [1]
« previous next »