win a ball from Bowling.com

Author Topic: 1500 oob surface  (Read 1328 times)

mab

  • Hero Member
  • *****
  • Posts: 536
1500 oob surface
« on: November 28, 2010, 07:44:21 PM »
What is the best way to resurface the Ogre pearl to get that oob reaction back. I have about 200 games on mine and it's long overdue.

 

gsback

  • Hero Member
  • *****
  • Posts: 1619
Re: 1500 oob surface
« Reply #1 on: November 29, 2010, 04:18:56 AM »
There was a post on part of this I believe, though maybe not specific to resurfacing, but to getting a ball back to factory finish....and that might suit part of your question.

Not sure there is something specific to resurfacing the balls though.
--------------------
BR.com.....going down the toilet one nugget at a time!!  

g thing is back....with a vengeance!!  

www.visionarybowling.com - Accept no substitute for the very best there is!!
www.visionarybowling.com - Accept no substitute for the very best there is!!

Best line I've heard about politics....
REMEMBER....POLITICIANS AND DIAPERS SHOULD BE CHANGED OFTEN AND FOR THE SAME REASON!!

scotts33

  • Hero Member
  • *****
  • Posts: 8451
Re: 1500 oob surface
« Reply #2 on: November 29, 2010, 05:11:39 AM »
This is the post that Gary is referring to I think. http://www.ballreviews.com/Forum/Replies.asp?TopicID=268419&ForumID=15&CategoryID=2

This is the part that would reference the Ogre Pearl or other 1500 US/CAMI polished Visionary equipment.  ----> Polished balls go straight from the burgundy scotch brite pad into the industrial polishing machine which uses a buffing compound to bring it up to 1500 polish.

Scotch-Brite Nylon Pads burgundy is 320.  Jason refers to a buffing compound that Visionary uses to bring the equipment to 1500 US/CAMI.  The media (compound w/ abrasive), I use that I can get as close to a new Visionary polished ball is Storm Step #2.  Now the amount of the media you use, along with amount of pressure, how fast the spinner is going and time in secs can be variable factors.

I'll add for me and the type of lane conditions I see on a regular basis which is BrunsAnvilane I like the OOB Visionary polished surface with a P3000 abralon pad scuff.  If I was using a Visionary ball on older wood with more surface wear I might prefer the OOB surface.

Hope this helps.
--------------------
Scott

Scott

mab

  • Hero Member
  • *****
  • Posts: 536
Re: 1500 oob surface
« Reply #3 on: November 29, 2010, 02:51:15 PM »
Thanks a million guys,I'm just getting back to bowling had shoulder surgery last year and the equipment needs work. As does my game.

MC

  • Hero Member
  • *****
  • Posts: 1300
Re: 1500 oob surface
« Reply #4 on: November 29, 2010, 08:14:38 PM »
I just resurfaced mine and a friends and used Storms technique to get to 1500 polished. "1500-grit Polished Factory Finish
1. 500-grit Abralon® pad – Sand for 15 seconds on all four sides.
2. Grey Scotch-Brite™ pad – Sand for 40 seconds on all four sides.
3. Storm® Step Two™ – Polish lightly for 15 seconds on two sides."

I used Snake Oil instead of Step Two.

worked great.
Good Luck

--------------------
"Don't Give Up...  Don't Ever Give Up."       -Jim Valvano

"Perfection is not attainable. But if we chase perfection, we can catch excellence."         -Vince Lombardi

             www.visionarybowling.com

www.solid9proshop.com

scotts33

  • Hero Member
  • *****
  • Posts: 8451
Re: 1500 oob surface
« Reply #5 on: November 29, 2010, 08:37:14 PM »
quote:
3. Storm® Step Two™ – Polish lightly for 15 seconds on two sides."

I used Snake Oil instead of Step Two.


Mike,

Which did you do above?
--------------------
Scott

Scott